Latest disposable dropper Tenders | Government disposable dropper Tenders

Central Government/Public Sector

CTN :45567467

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply and installation of fully sealed gangway with foot plate along with inner and outer fairings for emu trainset (to be operated at 160 kmph speed /180 kmph test speed) ref.drg.no. a01-2-5-001,alt-a latest alteration (refered for overall dimention and coordinates only) andtrack parameters to drg.no.a01-2-5-002, latest alteration as per specification icf/md/spec.-369,issuestatus-01,rev-00, amd-05. [ warranty period: 36 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45396913

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply and installation of fully sealed gangway with foot plate along with inner and outer fairings for emu trainset (to be operated at 160 kmph speed /180 kmph test speed) ref.drg.no. a01-2-5-001,latest alteration(refered for overall dimention and coordinates only) and track parameters to drg.no.a01-2-5-002, latest alterationas per specification icf/md/spec.-369,issue status-01,rev-00, amd-05. [ warranty period: 36 months after the date of delivery ]]

Central Government/Public Sector

CTN :45554970

18 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of steel plate size: 45x1600x3200mm to specn. is:2062-2011 or latest e 250 cu cwith guaranteed impact properties at minus 20 degree c. the supplier will submit a test certificate for each heat which will contain both physical and chemical properties. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45551313

22 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For four legged steel wire rope sling as per srdee/rs/ed/misc-201, capacity 5 ton, each leg rope dia 12 mm x 3500 length with 1 no master round ring at top and 2 nos sub ring at bottom and 4nos of eye hook of 2 ton capacity with opening of 42mm.note . 1)safe working load to be punched on crimping plate and hook.2) load test certificate to be submitted from govt approved lab along with supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45563110

20 Jun, 2026 NA

Medak-T - Telangana

Tender For ss explosive cladding on cs tube plate (test piece)

CTN :45535212

29 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of consumables - laying and jointing pvc pipe. heading, ss plate:ms plate ss 316 grade, 20mm thick, 200 200 mm (test certificate of the material need to be uploaded in technical evaluation), ms plate:ms plate is 2062 e450 grade, 20mm thick, 200 200 mm (test certificate of the material need to be uploaded in technical evaluation), al plate:al 6061 grade, 20mm thick, 200 200 mm (test certificate of the material need to be uploaded in technical evaluation), gmaw electrode wire spool 1.2 mm dia - er nicrmo-3 er nicrmo-3 10 kg spool- make :voestalpine b hler (test certificate and sample need to be provided during technical evaluation), gmaw electrode wire spool 0.8 mm dia - er nicrmo-3er nicrmo-3 10 kg spool- make :voestalpine b hler (test certificate and sample need to be provided during technical evaluation), ms metal core wire 1.2mm dia metal core wire - make :voestalpine b hler (test certificate and sample need to be provided during technical evaluation), gmaw electrode wire spool 1.2 mm dia - al cu6mnzrti-1al cu6mnzrti-1 7 kg spool- make :voestalpine b hler (test certificate and sample need to be provided during technical evaluation), gmaw electrode wire spool 1.2mm dia - er 70s-6er 70s-6 15 kg spool- make :voestalpine b hler (test certificate and sample need to be provided during technical evaluation), refill of shielding gas for gmaw welding ar95%+co25%refill of shielding gas for gmaw welding ar95%+co25% (7 cubic meter cylinders)

CTN :45363423

22 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : supply of metrology lab items - "ultrasonic flaw detector specification ● test range: 2.5 mm to 10 meter in steel● velocity range: 1000–15000 m/s● gain: minimum 100 db with calibrated steps● frequency range: 0.5–15 mhz● display: a-scan display (lcd)● modes: pulse echo and transmit/receive● linearity:● vertical: ±3%● horizontal: ±0.5%● probes: minimum 2 (straight and angle)● connectors: standard (size 00 or equivalent)● power: rechargeable battery+ ac supply ", "optical digital microscope specification magnification: 40x to 400x● digital camera: minimum 5 mp resolution● display: pc/monitor via usb/hdmi or built-in display● illumination: adjustable led illumination● focus: coarse and fine focusing mechanism● optics: coated lenses with wide field view● stage: mechanical stage with slide holder● software: image capture, measurement, and analysis software included● connectivity: usb / hdmi/ethernet", "portable surface roughness testerspecification:● parameters: ra, rz, rq, rt● measuring range:ra: 0.005–16 µmrz: 0.02–200 µm● resolution: ≤ 0.01 µm● accuracy: ±5% or better● stylus: diamond tip (≈5 µm radius)● cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm● display: digital lcd● output: usb interface for pc connection no 50000 ● standards: iso 4287 / din /ansi compliant● power: rechargeable battery", "digital height gage with driving wheel (300)specification:● measuring range: 0–300 mm● resolution: 0.01 mm● accuracy: ±0.03 mm● construction: hardenedstainless steel column● base: ground and lappedbase suitable for surface plate● measuring tip: carbidetipped scriber● movement: smooth sliderwith fine adjustment wheel● display: digital lcd● power: battery operated"

CTN :45551208

30 Jun, 2026 NA

Liluah - West Bengal

Tender For supply of side plate as per drg. no. 19/0219 of kpa jig & tool design office with integrated test piece. material specification: is2062 grade e450 with b or c type steel. [ warranty period: 30 months after the date of delivery ] ]

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

Disposable Dropper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector