Latest disrupter Tenders | Government disrupter Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45289413

27 May, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of spares for haco machinery_shearing machine - shearing m/c piston seal 50x35x11, shearing m/c o-ring 59,69 x 5,33 nr332, shearing m/c seal kit zx190006x01, shearing m/c seal kit zx180006x01, valve ad5e02fm002 pos.2 part no: hve1042hb1 for cnc shearing machine hslx-3016, oem: haco machinery pvt ltd, valve ad3e03cm002 pos.3 part no: hve643j1 for cnc shearing machine hslx-3016, oem: haco machinery pvt ltd, valve ad5e03cm002 pos.4 part no: hve1043j1 for cnc shearing machine hslx-3016, oem: haco machinery pvt ltd, double non-return valve-am3upab1003, pos.5- ng6 part no: hktgd6 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, single non-return valve am5udb1002, pos.6- ng6 part no: hkt10b for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, pilot op. valve adh7c01i001, pos.7 part no: hve1043e2 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, flow control valve am3qfabc004, pos.8 part no: hkwtx3 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, pr. limiting valve kec16me3c002+ kel16um10002 pos.9&10, part no: hvec1622x1 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, valve ad3e16bm002, pos.11 part no: hve642y1 for cnc shearing machine hslx-3016, oem: haco machinery pvt ltd, pr. relief valve cmp30c2001 part no: hkocmp30x1 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, pressure switch 350bar part no: hdsx2 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, valve ng6-3 part no: hkox41 for cnc shearing machine hslx-3016, oem: haco machinery pvt ltd, manual valve blade gap part no: hw21/4 for cnc shearing machine hslx-3016 oem: haco machinery pvt ltd, shearing m/c suction filter ,90l-125, shearing m/c timing belt neoprene, item name: backlash free shaft coupling with spider, part no: tvl1411, spare for: cnc shearing machine hslx-3016, oem: haco machinery pvt ltd., shearing m/c potmet 2k2 with cable l=9m

CTN :45318505

04 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of electric item refixation , x-ray machine refixation , dispensary item refixation , doctor room refixation , clerk room refixation , store room refixation , physiotherapy room refixation , dental machinery refixation , canteen refixation , generator set refixation , structure refixation

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

corporations/Associations/Others

CTN :45271544

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of condemned - atomizer (assorted)(as its condition),condemned - sticker cutting plotter machine and other items (as its condition),condemned - open metal barrel(as its condition),condemned - closed metal barrel (as its condition),condemned - damaged air baloon (as its condition),condemned - 10.00 x 20 full size flap (as its condition),condemned - 12v 25p (150 amps) plastic battery (as its condition),condemned - 12v 25p (180 amps) plastic battery (as its condition),condemned - ltv battery (as its condition),condemned - tyre buffing dust (as its condition),condemned - 10.00 x 20 radial tyre(as its condition),condemned - 11.00 x 22.50 radial tyre(as its condition),condemned - 7.50 x 16 radial tyre(as its condition),condemned - 7.50 x 16 nylon tyre(as its condition),cond - ltv tyre (assorted) (as its condition),condemned - 10.00 x 20 tube with neck (as its condition),condemned - tube cut pieces (as its condition),condemned - waste rubber materials (as its condition),condemned - waste paper records(as its condition),condemned - wooden small cut pieces, waste plywood & mica (as its condition),condemned - tree wood cut pieces(as its condition),condemned - bs iii radiator core (alu.) (as its condition),condemned - old aluminium cut pieces (as its condition),condemned - self motor (assorted)(as its condition),condemned - alternator (assorted)(as its condition),condemned - wiring horness(as its condition),condemned - electrical items :- and other items,condemned - used oil in 210 lts barrel (as its condition),condemned - used grease in barrel (as its condition),condemned - empty plastic barrel(as its condition),condemned - waste plastic materials (as its condition),condemned - auto iron (as its condition),condemned - brake drum (as its condition),condemned - broken spring leaves (as its condition),condemned - auto bearing with balls & cones (as its condition),condemned - brass bush, brass rivet (as its condition),condemned - battery cable with sleeve (as its condition),condemned - iron chips & burrs ( 12 - barrels) (as its condition),condemned - brake shoes with brake lining (assorted) (as its condition),condemned - radiator with iron frame bracket (as its condition),condemned - fuel pump assly (as its condition),condemned - power steering box with braket (as its condition),condemned - power steering box without braket (as its condition),condemned - gear box counter shaft with gear - and other items,condemned - axle shaft (assorted) (as its condition),condemned - door cylinder (assorted) (as its condition),condemned - hydraulic jack (assorted) (as its condition),condemned - machinery item lathe machine 3 nos (as its condition),condemned - waste m.s. iron scrap (as its condition),condemned - roofing iron structure & m.s.iron (as its condition),condemned - waste gi scrap (as its condition),condemned - engine oil filter and diesel oil filter (as its condition),condemned - wheel disc (as its condition),condemned - bs iii tyre lock ring (as its condition),condemned - radiator fan clutch with leaf = 830 nos (as its condition),condemned - contaminated paint tins (as its condition),condemned items : ceiling fan with leaf -and other items,condemned :- fly wheel - 168 nos, and other items,condemned - oil seperetor and other items,condemned :- radiator top tank and other items,condemned - a/c bus body shell(as its condition),condemned - bus body shell(as its condition),condemned - red bus body shell(as its condition)

CTN :45044886

28 May, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of mini caliber robot or csrov , explosive vapour detector evd , rocket wrench , dgital electronic sethoscope , de armour disruptor , back scatter x ray machine , triple sensor metal detector , liquid explosive detector , chemical analyser , drone with water disrupter , drone with search and explosive detection capability , eod 10 e nij

corporations/Associations/Others

CTN :45242197

22 May, 2026 NA

Sagar - Madhya Pradesh

Tender For auction sale of scrap ms light, heavy, mixed s sink,scrap heavy machinery (sheave) s sink,scrap cable al s sink,scrap diesel generator set s sink,scrap dumper s sink,scrap hydra s sink,scrap jcb s sink,scrap truck s sink,scrap gi scrap/ racks s sink,scrap machinery items s sink,scrap winder panels/parts s sink,scrap tyres s sink,scrap compressor s sink,scrap motor,scrap elect panel, miscellaneous inst item s sink

CTN :45255635

28 May, 2026 NA

Kanchrapara - West Bengal

Tender For supply of needle roller bearing, used in hitachi tr. motor bhrr iko-6116-35r or cf-10-1vb or cf-10-1 vbuu or similar, spec/drg no- as per clw's drg no. 10s 813-678 rev.-1 and plant and machinery guidelines of clw crj [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45207535

30 May, 2026 1.36 Crore

Bengaluru - Karnataka

Tender For supply of de-armor disrupter to police department

CTN :45143495

01 Jun, 2026 NA

Modasa - Gujarat

Tender For e tender cum auction of a. raw materials scrap details. as per annexure -a item no 1 to 14 b. non used machinery tools equipment, furniture scrap items details as per annexure -b item no-1 to 2129 at iti modasa

Disrupter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others