Latest distortion meter Tenders | Government distortion meter Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

CTN :45326601

17 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For corrigendum : supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :43950231

23 Apr, 2026 NA

Delhi - Delhi

Tender For procurement of spares for mi-17v5 helicopter - overhaul manual of 17mt-7215-05, overhaul manual of 8mt-7102-10/apu, overhaul manual of 8mt-7202-10/rh & lh jn box/ohm, illustrated part catalogue of 8mt-7210-036/036-003/relay panel, overhaul manual of 8mt-7210-036/036-003/relay panel, overhaul manual of 8mt-7210-160/rh cb panel, illustrated part catalogue of 8mt-7210-20, overhaul manual of 8mt-7210-20, overhaul manual of 8mt-7210-230/rt console panel, overhaul manual of 8mt-7210-300/rt control panel, overhaul manual of 8mt-7210-340/central control panel, overhaul manual of 8mt-7210-440-003, overhaul manual of 8mt-7210-50/80sv/ lt & rt s/w panel, illustrated part catalogue of 8mt-7213-10/3, overhaul manual of 8mt-7213-10/3, illustrated part catalogue of acr-500 v/uhf txrx, overhaul manual of acr-500 v/uhf txrx, repair manual of acr-500 v/uhf txrx, illustrated part catalogue of d-20-2, overhaul manual of d-20-2, illustrated part catalogue of d-500tb, overhaul manual of d-500tb, illustrated part catalogue of epv-50 bt-2s, overhaul manual of epv-50 bt-2s, illustrated part catalogue of mfpu-8, maintenance manual mfpu-8, overhaul manual mfpu-8, repair manual mfpu-8, illustrated part catalogue of mp-100s-3s/ elect motor, overhaul manual mp-100s-3s/ elect motor, illustrated part catalogue of nat-301, repair manual nat-301, overhaul manual of pmk-21-3s, illustrated part catalogue of p-119-3f-125, overhaul manual of p-119-3f-125, illustrated part catalogue of p-507 cvr) illustrated part catalogue of p-507 c, overhaul manual of p-507 cvr, repair manual of p-507 cvr, illustrated part catalogue of pmk-21-3s, illustrated part catalogue of po-500a, overhaul manual po-500a, illustrated part catalogue of pt-125, overhaul manual of pt-125, overhaul manual of rio-3a/bis-4n, illustrated part catalogue of sgu-15, overhaul manual of sgu-15, repair manual of sgu-15, overhaul manual of so-121-vm, overhaul manual of sspfk-bi-2s, overhaul manual of ter-1m, illustrated part catalogue of tks/601 kod/dod, overhaul manual of tks/601 kod/dod, overhaul moverhaul manua of l20-09-989 sfsvanua of l20-09-989 sfsv, overhaul manual of 20-1009-813-10 feathing test sol valve, overhaul manual of 20-1009-953 ve-2t, overhaul manual of 20-1257-704/705, overhaul manual of 20-760-801-10 auto feather, overhaul manual of 682700-2pc reducer box, maintenance manual of akip-4501 distortion meter, operating manual of akip-4501 distortion meter, overhaul manual of at 8-3 auto transformer, overhaul manual of bchf-208 phase sequence unit, overhaul manual of di22a throttle, overhaul manual of f-100 filter, overhaul manual of f-70 filter, overhaul manual of k-50 condensor, overhaul manual koch-1a frequency cut off unit, overhaul manual of kul-150 control box, overhaul manual of kvps condensor, overhaul manual of mkt-4a electomagnet, overhaul manual of pul-1a control panel, overhaul manual of pus-36-71, overhaul manual of sbk cabin light, overhaul manual of ss-78 chip detector, overhaul manual of tf-1 current transformer, overhaul manual of tn 115/7.5 transformer, overhaul manual of tr 115/36 step down transformer, overhaul manual of tr-100 regulating transformer, overhaul manual of ts 1-2s transformer, overhaul manual of ts310s04b transformer, illustrated part catalogue of ark-9, repair manual of ark-9, illustrated part catalogue of ark-ud, circuit diagram of gr2.087.223-01ps, illustrated part catalogue of gr2.087.223-01ps, maintainance manual of gr2.087.223-01ps, circuit diagram of gr2.087.224-06, maintainance manual of gr2.087.224-06, illustrated part catalogue of ri-65, techincal description, ipc & repair manual of rv-3m, maintenance manual gui-301.034 rf.110.42.00 of rv-3m, oh manual of spu-, illustrated part catalogue of yadro-1a, oh manual of yadro-1a

Distortion Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government