Latest distribution panel box Tenders | Government distribution panel box Tenders

State Government

CTN :45573174

30 Jun, 2026 2.05 Lacs

Parganas - West Bengal

Tender For repairing and overhauling of ht panel including replacement and servicing of the defective components for 11kv ht switch board at saltlake clear water pumping station.

CTN :45438320

02 Jul, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

CTN :45419986

11 Jun, 2026 81.51 Lacs

Kochi - Kerala

Tender For corrigendum : execution of the following works at spices board, palarivattom, kochi. sh. (1). providing 2c plus t rmu equipped with frtu, 11 kv lbs metering panel, 11 kv ht panel along with ht cabling works etc . (2) replacement of existing old 25 kva diesel generator set with new 250 kva (cpcb iv plus) compliant diesel generator set and allied works.

CTN :45444935

18 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For annual maintenance rate contract for repairs/replacement to 3-phase, a.c induction horizontal an vertical motors of pumping units. repairs /replacement to cubical control panel, panel board , switch gears etc. repairs/replacement to servo voltage st - annual maintenance rate contract for : repairs/replacement to 3-phase, a.c induction horizontal & vertical motors of pumping units. repairs /replacement to cubical control panel, panel board , switch gears etc. repairs/replacement to servo voltage stabilizers and manual operated voltage stabilizers. repairs/ replacement to ht/lt sub-station and its network. repairs /replacement to power conductor system, and electrification/illumination at various dewatering stations. details given in annexure b .

State Government

CTN :45427482

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to improvement and augmentation of lis bharoli phase-ii 1 no. tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl no-i jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.080 km), steel tubular poles 10 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), x-arm ci 100x50x6 mm, length 2800 mm x 2 nos for incommer line, x-arm ci 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch, go switch handle supporting ci 75x40x5 mm, length 460 mm, go ab switch unit (11kv, 400a, 25 ka) tripple pole o/d type, do fuse unit, cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), forntech inverter with 2 battries (ups), ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, universal optical cable (for mri), aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

State Government

CTN :45427480

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to jsv by prov. 11/0.4 kv, 25 kva dtr at bohal khalsa a/w 11 kv ht line in electrical section bharoli under esd hpsebl no-i jawalamukhi ed jawalamukhi - supply part of 11 kv ht line with aaac 7/3.81 (0.692 km), steel tubular poles 10 mtr. long, steel tubular poles 9 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), safety & maintenance equipment for line maintenance, ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

State Government

CTN :45427478

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to improvement of distribution system of various lwss in eletrical section silh under esd hpsebl majheen, ed jawalamukhi. - supply part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, cable 3.5 x 240 sq. mm, lt distribution panel box for 250 kva dtr, aluminium thimble 240 sq mm, capacitor bank 81 kvar for 250 kva dtr, danger plate, surge arrester, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, chemical earth, aaac 7/4.26 sq. mm, chain pully 3 ton, supply part of ct-pt unit, ct pt combined unit (pt:11 kv/110 v ct: 200/5 a), 3-ph, 4-wire tri vector meter (pt - ratio -/110 v, pvc multistrand 2.5 sq mm copper wire, 1 inch dia gi pipe for concealing, bend joint/elbow, st pole 9 mtr long with base plate, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 4 nos], x-arm: [channel iron (75x40x4.8 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 1 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos, ms angle iron (50x50x6 mm), length : 2800 mm x 4 nos, ms angle iron (50x50x6 mm), length : 460 mm x 2 nos, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, aluminium paint., red oxide, erection part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection charges & transportation charges complete in all respect of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection part of ct-pt unit, erection charges & transportation charges complete in all respect of ct-pt unit

CTN :45424732

23 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For supply of electrical items ( non authorized dealer)- pvc tape red, yellow, black,blue make - steelgrip for electrical, pvc board 4x7 make - havells/philips, pvc board 6x8 make - havells/philips, switch 6a make - anchor/rk lite/havells, socket 6a make - anchor/rk lite/havells, three pin plug top make - anchor/rk lite/havells , 5-15amp, pt bulb 60w, 230volt make - phillips/surya for electrical panded type, pt bulb 40w, 24volt make - phillips/surya for electrical, pt holder ceramic type make - havells/surya, aluminium tape (for electrical), water proof tape ( for electrical), cotton tape (for electrical), glass tape , ampire tape, painting brush o size for ele, painting brush 1/2" for electrical, painting brush 1" forelectrical, painting brush 4" for electrical, varnis make - doctor brand imersion (1 liter each), hylogen tube 500watt make - havells/philips , bajaj, hylogen holder 500watt make - havells/philips, room heater coil 1000watt make - anchor/havells, heater coil 1500watt make -anchor/havells , , araltide, rusotoline for electrical dept. each 1 leater, mobil grease unirex tm n3, for electrical (18 kg bucket), grease ap3 make - castrol/hp (20kg bucket), motor teruminal frame size- 90 (as per sample) make- abb, motor teruminal frame size- 100 (as per sample) make- abb, motor teruminal frame size- 112 (as per sample) make- abb, motor teruminal frame size- 132 (as per sample) make- abb, motor teruminal frame size- 160 (as per sample) make- abb, motor teruminal size- 2e2hxm280sm4 (as per sample) make- abb, motor teruminal size-36z4384730-2 (as per sample) make- abb , m2ba225-250, motor terminal size- 3624384730-11 (as per sample) make- abb, cooling fan size- 100 liner type (as per sample) make- abb, cooling fan size- 112 liner type (as per sample) make- abb, cooling fan size- 132 liner type (as per sample) make- abb, motor cooling fan size- 180 (as per sample) make- abb, motor cooling fan size- 200 (as per sample) make- abb, silica gel, trasformer oil make- power oil servo, g.i. nut bolt 6x25mm, g.i. nut bolt 6x50mm, g.i. nut bolt 8x35mm, g.i. nut bolt 8x65mm, g.i. nut bolt 12x65mm, motor 3.7kw, 5hp 1445 rpm frame size- 112 make-siemens flange type, capaciter 2.5mfd make- bajaj/philips, capaciter 4mfd make- bajaj/philips, capaciter 8 mfd make-bajaj/philips, exhaust fan 18", 220v single phase make- crompton/havells, cooler kit motor set 16", 220v single phase make- crompton/havells, tullu pump 0.05 hp for cooler make- crompton, celling fan 230 make-anchor/bajaj, pedastal fan 230v 250watt make- crompton/anchor, cable tai 300mm (for electrical), cable tai 150mm (for electrical), phase sequence protector (preventor) 110/220v make- siemens, panel cooling fan model- rec- 220- 60tb2 vac-230, 50 hz 0.40a make- rexnord, control transformer 30va, 220v to 24 volt, hole cutter for panel cutting 25mm, tapariya, copper patty 10x40mm, rotary switch 3phase 415v, 32a, make- salzer, crc seal loat (ht panel) red ureth one coating, aluminium lug 35mm ring type, aluminium lug 50mm ring type, aluminium lug 70mm ring type, aluminium lug 95mm ring type, aluminium lug 120mm ring type, aluminium lug 150mm ring type, aluminium lug 185mm ring type, aluminium lug 240mm ring type, aluminium lug 6mm ring type 6mm dia, aluminium lug 6mm ring type 8mm dia, aluminium lug 10mm ring type 8mm dia, aluminium lug 10mm ring type 6mm dia, aluminium lug 16mm ring type 8mm dia, aluminium lug 16mm ring type 10mm dia, aluminium lug 25mm ring type 10mm dia, aluminium lug 4mm ring type 6mm dia, aluminium lug 4mm ring type 8mm dia, copper lug pin type 10mm, copper lug pin type 16mm, copper lug pin type 25mm, copper lug ring type 6mm (as per sample), copper lug ring type 10mm (as per sample), copper lug ring type 16mm (as per sample), copper lug ring type 4mm (as per sample), igniter havels , c.g. , bajaj, distilled water, coolent (5ltr. each), submersible motor 5hp 5stage with pump make-texmo/cri, bimetric claim 33kv transformer, motor 18.5kw, 25hp 735rpm size-hxt22 5smb4 m

corporations/Associations/Others

CTN :45401486

12 Jun, 2026 10.00 Lacs

Tirupathur - Tamil Nadu

Tender For maintenance work for building and supply and delivery of kitchen vessels and equipments in amma unavagam in palanisamiyar road - supply ,delivery & fixing of steam boiler ckr 36 outer shell dia. : 28 , inner shell dia. : 19 , outer shell ht. . : 36 . steam output. : 30 kgs/hrs. operated by gas outer shells are made of 6mm ms plate. inner shells are made of 304 grade 16swg ss sheet. inner bottom 10swg ss sheet. steam boiler is fitted with automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, and drainage valve., supply ,delivery & fixing of steam iddly plant - cap 240 nos made of 304gde 16 swg ss sheet. this unit is divided with 04 chambers. this is mounted on ss stand . racks will be provided underneath to keep idly plates. idly boiled within 5 to 7 mts. heat resistancedoor with auto steam injection. each idly tray having 20 iddlies. total tray is 12 nos., supply and delivery of chest freezzer-double ef 450 double door chest freezer fibres body cap 450 ltrs , temp 8 degree to -25degree, supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, and other equipments supply & delivery of ss meals plate 11 dia, supply & delivery of ss water jug, supply & delivery of steam pipe line accessories 3/4 gi pipe & ms fittings, supply and delivery of gas pipe line:. manifold 4 + 4 point., supply and delivery of ss plate collecting trolley size : 600x500x750mm., supply and delivery of rice grinder - 50 kgs with 3 hp motor and auutomatic washing shower., aluminium vessel 25 kg capacity, aluminium vessel 10 kg capacity, aluminium bucket (25l-15kg), mixie with 3 jar, pressure cooker 20 l, ss rice karandy, ss sambar karandy, ss water drum 50 lit capacity, aluminium kadai-5 kg capacity, supply and fixing of water co2 stored pressure type 9 litres capacity fire extinguisher as per new is 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the departmental officers., supplying and erecting in position of following 250 liters capacity industrial model reverse osmosis water-cum purifier to deliver potable water with world health organisation (who) standards with following accessories. (a) ms skid - 1 no. (b) media 11054 no. vessel with 20 nb multiport valve (with media pubble and fine sand and activated carbon filling) set (c) feed pump 0.50 hp 1 no. (d) vertical pump 2-9, 2.00 hp / single phase 1 no.(e) membrane 40 x 40 filmtech (or) equilaents / osmonic (usa) - 1 no. and membrane pressure vessel 40 x 40 -1 no. & pressure gauge - 2 nos. (f) flow meter - 1 no. 20 filter with housing - 1 no.,low pressure switch - 1 no., level switch - 1 no. & necessary cpvc pipes and fittings. the system shall be provide with two panel control system with necessary stainless valves and fittings and float control etc. the rate should be inclusive of all civil works, wherever necessary to install the system in position and intact, supply and fixing of 300mm (12") sweep (light duty) ac exhaust fan complete without provision of hole in the wall, supplying, fabricating, erecting and fixing hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level., supply and fixing of single box type 436 w flu fitting complete with electronic ballast with tw round blocks on wall or ceiling with flu tube with pvc unsheathed copper leads from terminals to the fitting., supply and fixing of 1200mm sweep ac ceiling fan with stepped electronic 300w regulator with the existing down rod on the existing clamp, supply and fixing of 300mm sweep wall mounted fan with stepped electronic 300w regulator with the existing down rod on the existing clamp, supply and fixing of wt bulk head fitting suitable with guard and 15 w (100w) led bulb, wiring with 2 x 1.5 sq.mm. (22 / 0.3) pvc insulated single core unsheathed copper conductor of 1100v grade in suitable pvc

Distribution Panel Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

corporations/Associations/Others