Latest divider plate Tenders | Government divider plate Tenders

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45147651

25 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.

Central Government / Public Sector

CTN :45555463

01 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of "locking plate for thrust pad axle box as per s.c.rly drg no.c/els/lgd/bogie//4/46." [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45551878

29 Jun, 2026 NA

Bokaro - Jharkhand

Tender For compressor spares(42items) comprising of following: 1 - piston compl. w. con.r, p.n. 30229875 , 2 - piston ring part no. 38230099 , 3 - valve plate part no. 30405912 , 4 - piston part no.30271101 , 5 - bearing bush part no.31112504 , 6 - gasket set 4cc -6.2 pn : 372 835 07 , 7 - eccentric shaft 4- cyl. p.n. 30111150 , 8 - joint ring 31,9x1,6x1,8 p.n.37220010 , 9 - thrustring, thrust bearing p.n.31210302 , 10 - washer rotor p.n. 31300024 , 11 - terminal box bg- ce2/ce35 p.n. 34351781 , 12 - piston with connecting rod pn. 30229873 , 13 - piston ring part no.38230086 , 14 - valve plate a p.n.30405910 , 15 - piston part no.30271103 , 16 - gasket set 4ec- 4.2,4ec-6.2 p.n.37283505 , 17 - pist/con.r compl. p.n. 30229848 , 18 - piston ring p.n. 38230302 , 19 - valve plate 4pe(s) p.n. 30406330 , 20 - slide bearing p.n. 31113502 , 21 - gasket set part.n. 37284102 , 22 - crankshaft part. n.30111704 , 23 - o-ring, id32,99x2,62 p.n.37200339 , 24 - washer disk c4 p.n. 32050010 , 25 - plug 1/4"-18nptf, p.n. 36610121 , 26 - terminal box 4pes-15y-40p p.n.34350769 , 27 - piston with connecting rod pn.30229874 , 28 - valve plate part no.30405911 , 29 - piston ring part no.38230094 , 30 - piston-bg-al| d50|2gr|p.n.30271102 , 31 - gasket set 4dc- 5.2,4dc-7.2p.n. 37283506 , 32 - retaining washer.p.n.38215003 , 33 - lock washer s 6 fst p.n. 38215001 , 34 - piston compl. w. con.r p.n. 30229871 , 35 - valve plate 2fc-.. p.n.30405503 , 36 - bearing bush c1, d20 p.n.31111215 , 37 - bearing bush c1, d25 p.n.31111216 , 38 - piston compl. w. con.r, p.n.30229870 , 39 - piston ring iso 6622-2 p.n. 38230084 , 40 - valve plate 2gc-.. p.n.30405502 , 41 - piston-bg-al| d41| 1re3 p.n.30271104 , 42 - gasket set 2gc- 2.2/2gsl-3k p.n.37283002 ,

Central Government/Public Sector

CTN :45557116

25 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of piston w.c.r. p.n.4309077 4309176 , piston ring 4c seabird, part no. 4309022 , valve plate 4c seabird, part no.4309338 , bearing bush big 4c seabird p n 4309254 , thrust washer part n. 4309024 , terminal box part n. 4309505 , gasket set part n. 4309017 , crank shaft part n. 4305176 , piston w. c. r.p. n . 430108p1 4301176 , piston ring p.n. 430117r1 , valve plate double reed p. n. 4301332 , bearing bush body bush p. n. 4301256 , thrust washer p. n. .4322004 1 , terminal box part n. 4301505 , gasket set part n. 4301018 , crank shaft part n. 4301235 . , piston w. c. r. p.n .4322790 4322112 , valve plate double reed part n.4322760 , thrust washer part n.4322004 , terminal box part n.4322245 , gasket set part n. 4300002 , crank shaft part n. 4322561 , piston with connecting rod p.n. 4200024 , piston ring p.n. 4200336 , valve plate double reed part n.4200116 , bearing bush body bush part n.4200028 , thrust washer part n.4200392 , gasket set part n.4200162 , crank shaft part n. 4200061 , shaft seal part n.4000077 , o ring part n. 4200203 , oil pump set part n. 4201373 * /bid number : gem/2026/b/7656130 + /dated: 15-06-2026 ' ' / bid document 1 / 34

Central Government/Public Sector

CTN :45318363

18 Jun, 2026 11.17 Lacs

Sultanpur - Uttar Pradesh

Tender For corrigendum : tender for supply of machining of 62 lines components with hal material - column , column , column , angle , nut , washer , support , stud , bush , bush , bush , thrust ring , stopper , screw , nut , axle , limiter , support , screw , cylender , plunger , stud , column , column , column , roller , axle , nut , washer , bush , support , body , body , column , screw , body , cover , housing , screw , nut , pin , washer , rivet , rod , bush , spring , nut , cover , bracket , frame , strip , indicator panel , plate , chassis , panel(front) , panel(back) , cover , base , plate/support , ring , clamp , cover plate

Central Government And Public Sector

CTN :45559541

07 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of 1. gasket, o - ring, material - e.p.d.m. process water jacket, part no -715 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 2. gasket, o - ring, material - e.p.d.m.bearing thrust wear indicator, part no. - 714 suitable for can motor pump 220 drg. no. kaiga-3,4- 32112-2502-dd,r-0 , 3. retaining ring material - a 167 type 316-l part no. -911 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 4. retaining ring material - a 167 type 316-l part no. -912 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 5. bolt m12 x 1.75x 25l, material - a 193 gr b8 part no. - 7231 suitable for can motor pump 220 drg. no. kaiga-3,4- 32112-2502-dd,r-0 , 6. bolt m8x1.25x70l,bolts for linner disc, material - a 193 gr b8 part no. -7232 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502- dd,r-0 , 7. locking cap material -a 167 type 316-l part no. -908.1 suitable for can motor pump 220 drg. no. kaiga- 3,4-32112-2502-dd,r-0 , 8. bolt m10x1.5, bolt for radial bearing housing material -a 193 gr b9 part no. -724, 1 set - 8 bolts suitable for can motor pump 220 drg. no. kaiga-3,4- 32112-2502-dd,r-0 , 9. bolt m24 x 3x95l, casing bolts , material -sa 564 part no. -725 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 10. thrust washer hard chromium plating, material -sa 167 type 316l-hcr part no -47 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 11. shaft sleeve hard chromium plating, material -sa 276 type 316l- hcr part no -45, 1 set - 2 nos. suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 12. spacer a 276 type-316l part no -46 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 13. stopper nut a 276 type-316l part no -491 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 14. nut stopper a 276 type-316l part no -492 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 15. key a 276 type-316l part no -501 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 16. key material -a 276 type-316l part no. -502 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r- 0 , 17. key material -a 276 type-316l part no. -503 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502- dd,r-0 , 18. locking cap for thrust plate bolts. material -a 167 type 316-l part no. -908 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 19. tongued plain washers part no. -1672 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 20. tongued plain washers part no. -1692 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 21. plain washers part no. -1621 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 22. plain washers part no. -1631 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 23. plain washers part no. - 1641 suitable for can motor pump 220 drg. no. kaiga-3,4- 32112-2502-dd,r-0 , 24. plain washers part no. -1671 suitable for can motor pump 220 drg. no. kaiga-3,4-32112- 2502-dd,r-0 , 25. plain washers part no. -1681 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r- 0 , 26. plain washers part no. -1682 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 , 27. plain washers part no. -1691 suitable for can motor pump 220 drg. no. kaiga-3,4-32112-2502-dd,r-0 //bid details 2 / 30

CTN :45559779

25 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of spring helical compression , screw securing electrical contact retainer , bearing , spring , spring plunger torsion coller , key lockating actuting soft , pin contact assy , terminal lug brass 24v point 5a , nut clamp catch , hose , plate instruction , clip spring tension , link locking plunger , spring helical compression 65 , bushing rubber , adapter straight pipe to hose coupling , spring pawl , ring locking socket , rivet solid flat hd steel 8 x 30mm , nut hexagon , screw fillister head , spring helical extension , screw securing 5mm x 47mm , bearing ball single row skf 3075 , bearing ball single thrust 45mm x 85mm x 28mm , bearing ball jnl self aligning double row 35mm x 72mm x 23mm , collar shaft , bush locking plunger , bushing sleeve , plunger detent , spindle , connecting link rigid , locking plate nut and bolt , nut retaining support collar , packing nut , nut , cover lower elevating , cover upper elevating , bushing sleeve elevating , bearing sleeve elevating , spacer traversing , cover plate access traversing , nut castellated hex m24 traversing , washer plain steel 13mm traversing , bracket traversing , spacer * /bid number : gem/2026/b/7633098 + /dated: 15-06-2026 ' ' / bid document 1 / 44

CTN :45537989

24 Jun, 2026 NA

Jaipur - Rajasthan

Tender For annual rate contract (arc) for supply of wpil make pumps spares for various power plants of rvun - ct drain/ slug pump pump sl.no. vbp 30111-114 ,model : e12tc/1 stg, motor rating: 15 kw, speed:1460 rpm for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand coller, partno. 5, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, bearing for bowl -ruuber, partno. 11, bearing for bowl -bronze, partno. 12, discharge case, partno. 13, bearing for d/ case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, bottom column pipe, partno. 18, bottom line shaft, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft coupling, partno. 22, line shaft sleeve, partno. 23, top column pipe, partno. 25, sole plate, partno. 28, base plate, partno. 29, discharge head, partno. 30, head shaft with key, partno. 31, packing box, partno. 32, bearing for pkg box, partno. 33, packing , partno. 34, lantern ring, partno. 35, packing gland, partno. 36, water deflector, partno. 37, 1 tbh assly, partno. 40, motor stand, partno. 41, adjusting nut, partno. 42, flexible coupling, partno. 43, spares for zld pump model : d200-150-500, wpil ref no. ebp 30004-05-i, capacity-310 m3 /hr, total head-80 mtr, motor rating: 110 kw, speed:1484 rpm for ctpp, chhabra, casing, partno. 1, stuffing box cover, partno. 2, impeller, partno. 3, casing wearing ring, partno.4, shaft, partno. 5, sleeve , partno. 6, gland packing, partno. 7, gland lock, partno.8, impeller key, partno.9, coupling key, partno. 10, a/f bearing (d.e.), partno. 11, a/f bearing (n.d.e.), partno. 12, impeller nut, partno. 13, imp. nut lock washer, partno. 14, bearing lock nut, partno. 15, frame adaptor, partno. 16, bearing housing, partno. 17, bearing cover- d.e., partno. 18, bearing cover- n.d.e, partno. 19, adaptor foot, partno. 20, breather , partno. 21, constant level oiler, partno. 22, lip seal-de, partno. 23, lip seal- nde, partno. 24, water thrower, partno. 25, seal ring, partno. 26, gasket for casing, partno. 27, stud, partno. 28, nut for stud, partno. 29, hex. hd cap screw, partno. 30, hex. hd cap screw, partno. 31, hex. hd cap screw, partno. 32, hex. hd cap screw, partno. 33, plug, partno. 35, spares for ds pump, model:- gm12tc, wpil ref. no.: - vj-30091-92, no. of stage: - 6, capacity: - 240 m3/hr, total bowl head: - 70 mtr, speed: - 1480 rpm, motor rating: - 75 kw for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for suction bell, partno. 4, sand collar, partno. 5, hex. head cap screw, partno. 6, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, rubber bearing, partno. 11, bearing for bowl, partno. 12, discharge case, partno. 13, bearing for discharge case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, hex. hd. cap screw, partno. 17, bott. column pipe-60" lg, partno. 18, bott. line shaft-60" lg, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft sleeve, partno. 22, line shaft coupling, partno. 23, hex. hd. bolt with nut, partno. 24, top column pipe, partno. 25, hex. head cap screw, partno. 26, foundation bolts, partno. 27, sole plate, partno. 28, discharge head, partno. 29, head shaft with key, partno. 30, packing box, partno. 31, packing box bearing, partno. 32, packing, partno. 33, lantern ring, partno. 34, hex. hd cap screw, partno. 35, packing gland, partno. 36, water deflector, partno. 37, hex. hd. bolt with nut, partno. 38, motor stand, partno. 39, thrust brg. hous. assy., partno. 40, adjusting nut, partno. 41, flexible coupling, partno. 42, hex. hd cap screw, partno. 43, pump sl.no. val 30111-12, model : e14tc/4 stg, motor rating: 132 kw, speed:1488 rpm for csctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand co

CTN :45539060

20 Jun, 2026 7.81 Lacs

Multi City - Andhra Pradesh

Tender For fabrication of modified new adjustable coal nozzle tips 26" size with divider plate y and zarrangement for all corners 2&4 and 1&3 of units-5 and 6 boilers for a period of 6 months from the date of commencement of the work during the year 2026-27.

Divider Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector