Latest dixon shelves Tenders | Government dixon shelves Tenders

CTN :45302567

02 Jun, 2026 19.76 Lacs

Kalpakkam - Tamil Nadu

Tender For supply of newfront hmi of p141 micom relay as per bid requirement mentioned in atc. , newfront hmi of p442 micom relay as per bid requirement mentioned in atc. , 3.6v, 1200mah half aa lithium battery as per bid requirement mentioned in atc. , hand reset and electrical reset, flag indicating 220v dc electromagnetic tripping and control relay as per bid requirement mentioned in atc. , self reset, flag indicating single element 220v dc operated electromagnetic tripping and control relay as per bid requirement mentioned in atc. , electrical reset, flag indicating single element 220v dc operated electromagnetic voltage selection relay as per bid requirement mentioned in atc. , self reset, flag indicating 220v dc operated electromagnetic trip circuit supervision relay as per bid requirement mentioned in atc. , self reset, reverse flag indicating single element 220v dc operated electromagnetic dc circuit supervision relay as per bid requirement mentioned in atc. , self reset, flag indicating single element 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , self reset, flag indicating 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , self reset, three element 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc electromagnetic high speed tripping and control relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. , hand reset, flag indicating three element 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc electromagnetic master tripping and control relay as per bid requirement mentioned in atc. , self reset 220v dc operated electromagnetic trip circuit supervision relay as per bid requirement mentioned in atc. , hand reset, led indicating 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. supply, testing, packing, transit insurance, safe delivery and warranty of newfront hmi of p141 micom relay with model no.: p141316a6m0410j and make: m/s schneider electric., supply, testing, packing, transit insurance, safe delivery and warranty of newfront hmi of p442 micom relay with model no.: p442316b6m0400k and make: m/s schneider electric, supply, testing, packing, transit insurance, safe delivery and warranty of 3.6v, 1200mah aa lithium battery suitable for px4x micom relay front hmi application. preferable make m/s tadiran, supply, testing, packing, transit insurance, safe delivery and warranty of hand reset & electrical reset, flag indicating 220v dc electromagnetic tripping & control relay with 20 nos (16no+4nc) of contacts, case size-4 and flush mounting ge make, type:mvaj205-l and model: mvaj205la1004a in 86 a/b group trip application., supply, testing, packing, transit insurance, safe delivery and warranty of hand reset & electrical reset, flag indicating 220v dc electromagnetic tripping & control relay with 10 nos (8no+2nc) of contacts, case size-2 and flush mounting ge make, type:mvaj105-l and model: mvaj105ja1002a in 96 busbar protection trip application., supply, testing, packing, transit insurance, safe delivery and warranty of self reset, flag indicating single element 220v dc operated electromagnetic tripping & //bid details 2 / 28

State Government

CTN :45275009

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot non ferrous scrap - scrapped s&t cables and hdpe ducts. (1)signalling cables copper -1.5sqmm(2c,4c,6c,8c) and 5c 2.5sqmm armoured copper cable. (2) telecom cables : copper telephone (20,50 and 200 pairs)clock pas cctv (co axial), power cables,fiber cables-fots (48 cores and it (6 cores). (3) hdpe ducts -40/50 sqmm dia of both signalling and telecom system. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 04. i) this item comes under the category of hazardous and other waste and its sale shall be made only to an authorised actual user or authorised waste collector or an authorised disposal facility who have been authorised by state pollution control board/cpcb/ministry of environment, forest and climate change under hazardous and other wastes (management & transboundary movement) rules, 2016. therefore, participating bidders must hold valid authorization/registration certificate from spcb/cpcb/moefcc. this authorization/ registration certificate must be valid both at the time of bidding as well as at the time of lifting of material.ii) firm shall also submit a certificate/undertaking in regard to the total hazardous waste purchased/collected and processed for the current financial year till the time of auction.iii) original authorisation/registration certificate as well as the passbook issued to purchaser by spcb/cpcb along with authorization shall be required to be produced at the time of taking delivery. handing over of the hazardous and other wastes to the purchaser shall be only after making of the entry into the passbook of the purchaser by the depot officer of dmrc custodian.iv) the entire arrangement for transportation of the lot shall be made by the purchaser and the responsibility of safe transport of hazardous and other wastes as per provisions of hazardous & other wastes (management & transboundary movement) rules-2016 shall lie entirely on purchaser.v) the purchaser (receiver) shall also ensure the necessary authorisation for transport from concerned spcbs and this aspect shall be clearly stated in transport manifest (movement document) issued by department of dmrc handing over hazardous and other waste scrap to the purchaser. before taking delivery the purchaser shall submit documents/details to depot officer of custodian to show that (a) in case of transportation of hazardous and other waste for final disposal to a facility existing in a state other than the state where the waste is generated, he has obtained no objection certificate from the spcbs of both the states (b) in case of transportation of hazardous and other waste for recycling or utilisation including co-processing, he has given intimation to both spcbs (c) in case of transit of hazardous and other waste for recycling, utilisation including co-processing or disposal through a state other than states of origin and destination, he has given prior intimation to concerned spcb of states of transit.vi) the purchaser shall also ensure that the transport manifest system (movement document) for hazardous and other waste prepared by the depot officer of dmrc custodian as per provisions of hazardous waste management rules is followed. he will also give an undertaking that the relevant copies of the transport manifest (movement document) (as per colour code prescribed in the hazardous waste management rules shall be duly signed by him as well as by the transporter arranged/nominated by him and proper disposal of each signed copy of the transporter shall be ensured by him as well as by the transporter arranged/nominated by him for lifting the lot. also the acknowledgment copy of the transport manifest (blue copy) shall be provided by him to dmrc within 07 days of lifting a lot.

State Government

CTN :45259546

04 Jun, 2026 4.11 Lacs

Multi City - Karnataka

Tender For following works shall be carried out quarterly during the contract period for the two identical sets of co2 flooding system at mghe power house. the one set of system for carting to the units-1,2,3&4 and the second set of system for carting to units-5,6,7&8. i)cleaning of heat detector externaly with dry cloth ii)ensure working condition of heat detectors iii)cleaning of smoke detector externaly with dry cloth iv)ensure working condition of smoke detectors v)simulate heat and smoke detector simultaneously and check for cross zone vi)checking for leakage in pilot cylinder vii)checking the weight of co2 pilot cylindersviii)check the condition of co2 pilot hose ix)check the condition of co2 discharge hose x)inspect pressure switch and check for its functioning xi)inspect maual call points and check for its functioning xii)inspect abort switch and check for its functioning xiii)inspection of online weigh monitor and check for its functioning xiv)inspect hooter with strobe and check for its functioning xv)checking for healthiness of the battery xvi)checking the condition for slave nrv xviichecking the condition for master nrv xviii)checking of solenoids. xix)refilling of co2 cylinder and pressure testing 45 kg capacity and 4.5kg capacity (in case release of co2 gas during generator fire incidents) xx)any other work connected with the system not explicitly mentioned shall also be carried out for safe and proper operation of the system. xxi)conducting the demo of operation of the co2 flooding system twice (once in 2 quarter) during the annual maintenance contract period for kpcl staff.

Central Government/Public Sector

CTN :45285075

08 Jun, 2026 NA

Vadodara - Gujarat

Tender For multiple media auto changeover converter-4 port, for simultaneously interconnectingdigital axle converter, ufsbi, block phone etc. across a block section/ ibs over multiple media. product has the following features: a)two 120 ohm e1 main links with rj45 connector, having(1+1) hot standby facility b)two optical main links with (1+1 hot standby dual core path and single core path) having20 km driving distance. c)four v.21n.23 (e&m) 2-wire/4-wire user interface with auto changeover to quad links in case of failure of all main links. each user port is configurable as 2w or 4w without any restriction. d)unit supports power off fail safe mechanism. in case the unit is switched off, all analog user devices are bypassed to the quad link automatically. - e)unit supports four numbers of potential free contacts which can be linked with data logger/rtu for e1 status, optical status & power supply status. f)unit supports front panel resettable audiblebuzzer in case ofmain link fails (optical or e1). g)unit suppqrts front panel led indicators for quad health status, e1 dual, optical dual path. h)uriit %b7 has dual hot standby dc power supply having 24vdc/48vdc i)unit is 1u height with 19 inch rack mountable-facility j)unit supports operating temperature from -5 degree celsius to +55 degree celsius. accepted make/brand:-cygnus or team-link or similar. make/brand- cygnus 845-4p or similar ( warranty period : upto 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ] ]

CTN :45112926

28 May, 2026 NA

Kodinar - Gujarat

Tender For corrigendum : supply of safety shoes , gum boots , safety goggles with case , over spectacles goggles , safety helmet , ear plug with case , earmuff , n 95 nose mask , reflective jackets , pu coated hand gloves , cotton hand gloves , electrical hand gloves 11kv , electrical hand gloves 1kv , nitrile hand gloves , marine life jacket , raincoat , barricading tape , half piece gas canister mask , windsock flag , windsock stand , chemical splash goggles , fire blanket 2m x 2m , aprons lab , intrinsically safe torch 300 lumens , intrinsically safe torch 150 lumens , scaffolding tags , full body harness with shock absorber lanyards , face shield , cryogenic hand gloves , cryogenic suit , water gel blanket , lifebouy , pvc suits

CTN :45252333

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

State Government

CTN :45233237

25 May, 2026 7.26 Lacs

Bardez - Goa

Tender For disposal off tangible assets movable at mapusa residency unit of goa tourism development corporation - beds, head boards, wooden bed side tables, wooden teapoy, wooden teapoy glass top, curtains, single sofa chair, wooden writing tv tables, writing table chairs, wardrobe, wooden cupboards with 2 racks, sofa sets 3 seater (wooden), sofa set 2 seater (wooden), center table with glass top, teapoy bedside stool (curved), wooden stool (big), reception counter (3.5*2), reception counter (7.5*2), reception counter (5.5*2), office computer table wooden, office metal table with wooden top (2.5*5), office chairs, dressing mirrors, t.v, epbx system, telephone instruments, wall clocks, geysers, flasks, safe godrej, plastic chairs, picture frames, wall mirror in toilet and lobby, showcase in office, water cooler, water purifier, water pump, water tank 1,000 ltrs (over head), water tank 2,000 ltrs (over head), water tank 5,000 ltrs (garden area), wall fans, ceiling fans, steel sink (mini hall), gas cylinder, alluminium ladders, fire extinguishers, bathroom mirrors, computers, biomatricks machine, printer cannon mf244dw, printer brother dcp-b7535dw, center table wooden (round), slotted angle rack, home kund (wedding & pooja), battery 2*p 1500, cctv camera, sewage treatment plant, money detector machine, emergency lights, plastic table, wheel chair, mattress, women clay statue, wall foutain at lobby, clay earthrn pot at lobby, mario miranda big picture frame lobby, dustbin in rooms, set top box, focus light small/b in garden area reception entrance, main hall focus light, acrylic tray, buckets, mugs, health faucet toilet, toilet tap, mixture tap toilet, toilet shower, wash basin, wash basin tap, wash basin mirror, steel stand towel, toilet steel soap case, iron, drinking glass, pedestral fan, serial light, komod in room toilet

Central Government And Public Sector

CTN :45194508

05 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of cnc led machine lights heavy-duty type for cnc machine area illumination, specifically designed for reliable operation in harsh industrial environments involving continuous exposure to coolant, oil mist, metal chips, dust, humidity, and high vibration, ensuring consistent illumination, durability, and long service life. the make & model shall be similar to model no: cr-gmll-24-d-30w of craftech, phoenix, rittal or equivalent. construction: 1.enclosure material: borosilicate glass (minimum 4.2 mm thick). 2.ip rating: minimum ip67 (ip68 preferred) as per is/iec 60529 for the model or design. electrical: 1.rated power:30w (+/-10%). 2.input voltage: direct 24 v dc & suitable to operate through external smps adapter/driver 3.polarity protection: reverse polarity safe. 4. cable length: minimum 2 meter oil resistant flexible cable . optical: 1.led type: lm-80 approved, high-quality industrial leds (e.g., osram / equivalent). 2.colour temperature: 6500 k +/- 500 k. 3.cri: 80. 4.luminaire efficacy: 110 lm/w (system efficacy, not led chip only). 5.glare-free . 6.operating temperature: -20 degree c to +65 degree c. document & test report: 1.ip67/ip68 test certificate- shall be furnished along with offer . 2.technical datasheet shall be furnished along withoffer. 3.manufacturer's routine test certificate covering optical & electrical shall be furnished along with the material. authorization: oem or oem authorized dealers only shall quote & shall submit authorized dealership certificate in case of dealer from oem. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Dixon Shelves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

corporations/Associations/Others

State Government