Latest doe spanner Tenders | Government doe spanner Tenders

CTN :45280460

12 Jun, 2026 NA

Thumba - Kerala

Tender For supply of adjustable spanners , combination piers , two in one screw drivers , long nose pliers , bent nose pliers , side cutting pliers , mini pliers flat nose , mini pliers round nose , mini pliers long needle nose , mini pliers long needle bent nose , pincers , torque wrenches , ratchet handle , torx bit sockets and e sockets set half inch square drive , socket set 12.7 mm square drive , pipe wrench , ring spanner , double ended spanners , flat chisels , chisels with rubber grip , tools trolley , grease gun , spirit level , oil can , allen key , pipe vices , water pump pliers , locking pliers , locking pilers , flat screw driver , screw driver sets , striking screw drivers , chain pipe wrenches , claw hammer with handle , soft faced hammer with handle , soft faced hammer spares , tin cutters with spring , snap of cutters , snap off cutter blades , hss all hard , cut of wheel , mansonry drill bits , flat handle , three square files , half round files , round files 2nd cut , square files 2nd cut , saw files slim taper

Central Government/Public Sector

CTN :45302597

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

CTN :45307560

02 Jun, 2026 4.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of digital multi meter fluke 10190 , allen key l type , allen key l type 4 way type , cutting wheel 4 , open mouth bag 16 , washing tray , drill p s 9 mm set , drill p s 2 point 5 mm set , grip screw driver set , screw driver c 812 , tray tool box , combination spanner 6 to 32 set , externak circlip , strai ght internal , thpw 24 , piclsup tool , digital ampere meter w 4110

CTN :45318064

10 Jun, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of hardware items -blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable t

CTN :45332729

12 Jun, 2026 5.00 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of wooden hand wire brush 3 inch x 6 inch , teflon tape , rustolene pidilite make 500ml , holdite 500 gm pack , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg pack , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack , blue tube 15ml , piano wire , graphite powder fine , hacksaw blade , marken cloth , gulli grinder , grinding wheel 2inch , grinding wheel 4inch for ag 4 grinder , grinding wheel 7inch for ag 7 grinder , buffing wheel 4 inch for ag 4 grinder , buffing wheel 7 inch for ag 4 grinder , cutting wheel 4inch for ag 4 grinder , cutting wheel 7inch , cutting wheel 14inch , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass , stainless steel plate , anabond 112 thread locker , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough , emery paste fine , brass rod , boiler gauge glass , solenoid valve with coil two way , solenoid valve with coil one way , stag jointing paste , galva coating gcs 73 , grinding wheel black for bench grinding machine , grinding wheel green for bench grinding machine , usha martin make steel wire rope , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make , spring washer , split pin champion make , anabond 666 , leather hand gloves , rubber star for coupling set l-70 , rubber star for coupling set l-75 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , ring spanner set 6mm to 32 mm taparia make , d spanner set 6mm to 32 mm taparia make , paint brush , red oxide primer british paint asian make , g p thinner , borex powder , graphite fire crucible 120 kg , ss flat grade 304 , silver brazing flux , gauge glass sleeve , gauge glass rubber cone , hardware item 1 , hardware item 2 , hardware item 3 , hardware item 4 , hardware item 5 , hardware item 6 , hardware item 7 , hardware item 8 , hardware item 9 , hardware item 10 , hardware item 11 , flexible hand grinder , rubber hose pipe 1 , rubber hose pipe 2 , rubber hose pipe 3 , rubber hose pipe 4 , rubber hose pipe clamp , wire rope clamp , high temperature putty , full link coupler , half link coupler , bearing 1 , bearing 2 , bearing 3 , bearing 4 , bearing 5

CTN :45333007

05 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of 4 way spanner , 7.5 cc propeller , lipo 2200 mah , 7.5 cc wheel , 62 cc fuel pipe , tx bty 4.8 v , rx bty 6 v , nose steering arm , methanol aeromodel fuel , castor oil , araldite , sr 998 , silicon tube , nylon thread , led roll

corporations/Associations/Others

CTN :45205777

30 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For etender cum auction for sale of non moving and obsolete items ferrous and non ferrous scraps etc in available at central store gcc trichy and substores virudhachalam - lot - 1 ( items -2) 1.ct 110 kv 150-75-50/1a (metering ct ) 0.2 s accurasy -15 nos. 2.copper cable scrap (thennur yard ) - 9354 kg the details are given in the specifications., lot - 2. ( items -2 ) 1. miscellaneous iron scrap-16432kg 2.gi scrap ( thennur yard)-6276 kg the details are given in the specifications., lot-3 (items-1) 1.miscellaneous iron scrap (thennur yard)-12352 kg the details are given in the specifications., lot-4 (items-7) 1. miscellaneous iron scrap (collectorate yard) -8230 kg 2.bolt and nut gi 70 x 20 mm-500 kg 3.bolt and nut gi 40 x 20 mm-500 kg 4.bolt and nut gi 45 x 20 mm - 550 kg 5.bolt and nut gi 65 x 20 mm-459 kg 6.bolt and nut gi 65 x 18 mm-100 kg 7.bolt and nut gi 60 x 20 mm-300 kg the details are given in the specifications., lot-5 (items-1) 1. gi scrap (collectorate yard)-18666 kg the details are given in the specifications., lot-6 (items-1) 1. acsr scrap (thennur yard)-30937 kg the details are given in the specifications., lot-7 (items-1) 1. acsr scrap (thennur yard)-30110 kg the details are given in the specifications., lot-8 (items-1) 1.gi wire scrap (thennur yard)-13300 kg the details are given in the specifications., lot-9 (items-1 ) 1. gi / ms tower angle scrap (thennur yard)-53023 kg the details are given in the specifications., lot- 10 (items- 1) 1.gi / ms tower angle scrap (collectorate yard)-50000kg the details are given in the specifications., lot-11 (items-1 ) 1. gi / ms tower angle scrap (collectorate yard) - 53439 kg the details are given in the specifications., lot-12 (items-1 ) 1.empty steel drum 3 to 6 dia (thennur-82 & collectorate-19) -101 no. the details are given in the specifications., lot-13 (items-2) 1.empty barrel 40/45 gl capacity leaky- 194 no 2.empty barrel 40/45 gl capacity sh- 173 no. the details are given in the specifications., lot-14 (items-17) 1. condemned gas cylinder various size-29 no. 2.condemned fire extingushers various size-13 no. 3.alu . incl .aac cutbits scrap-1993 kg 4.scrap alu lug cable -775 kg 5. scrap gi with porcelin-659 kg 6. condemned dc panel scrap-5 no 7. machinary parts scrap- 1588 kg 8.scrap teak wood-6 kg 9.scrap meters/meter parts-33 kg 10. scrap aluminium with insulation-535 kg 11.cond petrol chain saw machine 22"- 1 no. 12. cond window type a/c 1.5 ton-4 no 13. cond battery charger-1 no 14. cond walkie talkie (set of 2 nos)-1 no. 15.cond split ac various capacity-6 no. 16.cond binoculars-1 no. 17. cond gas leakage detector-1 no. the details are given in the specifications., lot-15 (items-1 ) condemned lorry 10 ton capacity reg no tn 45- k 6734, ashoke leyland with stepney, jacky with lever & wheel spanner available at 230 kv auto ss campus perambalur - 1 no. the details are given in the specifications., lot-16 (items-4) 1. cond mini bus 1) reg.no:tn 49 f 3640, make:eicher mlv with stepney, jacky & lever.2.reg.no:tn 45 f 3689, make: ashoke leyland with stepney, jacky & lever. 3.reg.no:tn 45 k 5956, make: eicher lmv with stepney, jacky & lever. 2. cond van/ reg.no: tn 45 f 7571 make: bajaj tempo ltd., with stepney,jacky & lever available at 110 kv grid ss store campus.the details are given in the specifications., lot-17 (items-2) condemned lorry 10 ton capacity: 1.reg no tn 45 - p 8575, ashoke leyland with stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. 2.reg no tn 45/ q 6201, ashoke leylandwith out stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. the details are given in the specifications., lot-18 (item-2 nos.) condemned lorry 10 ton capacity: 1. reg no tn 45/ m 9769, ashoke leyland with stepney, jacky with lever & wheel spanner available at 110 kv grid ss campus/trichy store. 2.reg no tn 45/ f 8341, ashoke leyland with stepney, jacky with l

corporations/Associations/Others

CTN :45294072

08 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For etender cum auction for sale of non moving and obsolete items ferrous and non ferrous scraps etc in available at central store gcc trichy and substores virudhachalam - lot - 1 ( items -2) 1.ct 110 kv 150-75-50/1a (metering ct ) 0.2 s accurasy -15 nos. 2.copper cable scrap (thennur yard ) - 9354 kg the details are given in the specifications., lot - 2. ( items -2 ) 1. miscellaneous iron scrap-16432kg 2.gi scrap ( thennur yard)-6276 kg the details are given in the specifications., lot-3 (items-1) 1.miscellaneous iron scrap (thennur yard)-12352 kg the details are given in the specifications., lot-4 (items-7) 1. miscellaneous iron scrap (collectorate yard) -8230 kg 2.bolt and nut gi 70 x 20 mm-500 kg 3.bolt and nut gi 40 x 20 mm-500 kg 4.bolt and nut gi 45 x 20 mm - 550 kg 5.bolt and nut gi 65 x 20 mm-459 kg 6.bolt and nut gi 65 x 18 mm-100 kg 7.bolt and nut gi 60 x 20 mm-300 kg the details are given in the specifications., lot-5 (items-1) 1. gi scrap (collectorate yard)-18666 kg the details are given in the specifications., lot-6 (items-1) 1. acsr scrap (thennur yard)-30937 kg the details are given in the specifications., lot-7 (items-1) 1. acsr scrap (thennur yard)-30110 kg the details are given in the specifications., lot-8 (items-1) 1.gi wire scrap (thennur yard)-13300 kg the details are given in the specifications., lot-9 (items-1 ) 1. gi / ms tower angle scrap (thennur yard)-53023 kg the details are given in the specifications., lot- 10 (items- 1) 1.gi / ms tower angle scrap (collectorate yard)-50000kg the details are given in the specifications., lot-11 (items-1 ) 1. gi / ms tower angle scrap (collectorate yard) - 53439 kg the details are given in the specifications., lot-12 (items-1 ) 1.empty steel drum 3 to 6 dia (thennur-82 & collectorate-19) -101 no. the details are given in the specifications., lot-13 (items-2) 1.empty barrel 40/45 gl capacity leaky- 194 no 2.empty barrel 40/45 gl capacity sh- 173 no. the details are given in the specifications., lot-14 (items-17) 1. condemned gas cylinder various size-29 no. 2.condemned fire extingushers various size-13 no. 3.alu . incl .aac cutbits scrap-1993 kg 4.scrap alu lug cable -775 kg 5. scrap gi with porcelin-659 kg 6. condemned dc panel scrap-5 no 7. machinary parts scrap- 1588 kg 8.scrap teak wood-6 kg 9.scrap meters/meter parts-33 kg 10. scrap aluminium with insulation-535 kg 11.cond petrol chain saw machine 22"- 1 no. 12. cond window type a/c 1.5 ton-4 no 13. cond battery charger-1 no 14. cond walkie talkie (set of 2 nos)-1 no. 15.cond split ac various capacity-6 no. 16.cond binoculars-1 no. 17. cond gas leakage detector-1 no. the details are given in the specifications., lot-15 (items-1 ) condemned lorry 10 ton capacity reg no tn 45- k 6734, ashoke leyland with stepney, jacky with lever & wheel spanner available at 230 kv auto ss campus perambalur - 1 no. the details are given in the specifications., lot-16 (items-4) 1. cond mini bus 1) reg.no:tn 49 f 3640, make:eicher mlv with stepney, jacky & lever.2.reg.no:tn 45 f 3689, make: ashoke leyland with stepney, jacky & lever. 3.reg.no:tn 45 k 5956, make: eicher lmv with stepney, jacky & lever. 2. cond van/ reg.no: tn 45 f 7571 make: bajaj tempo ltd., with stepney,jacky & lever available at 110 kv grid ss store campus.the details are given in the specifications., lot-17 (items-2) condemned lorry 10 ton capacity: 1.reg no tn 45 - p 8575, ashoke leyland with stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. 2.reg no tn 45/ q 6201, ashoke leylandwith out stepney, jacky with lever & wheel spanner avalable at 110 kv grid ss campus, m.c.road, thanjavur. the details are given in the specifications., lot-18 (item-2 nos.) condemned lorry 10 ton capacity: 1. reg no tn 45/ m 9769, ashoke leyland with stepney, jacky with lever & wheel spanner available at 110 kv grid ss campus/trichy store. 2.reg no tn 45/ f 8341, ashoke leyland with stepney, jacky with l

CTN :45119106

25 May, 2026 7.57 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of mt spares - tool kit,ncvd-x-4736000,wheel nut spanner & tommy bar , tool kit,cvd-30166,anchor hold fast no 1 , tool kit,cvd-17082/25768,block wooden for jack , tool kit,cvd-62120400121,bulb 12v for front indicator , tool kit,cvd-2590000857,chock large , tool kit,f-8038000,halogen bulb h4 24v 70/75 w p45 , tool kit,cvd-5830421,brake bleeding tube , tool kit,2640-000004,material tube repair hot seal patch , tool kit,cvd-39500-m-80010,plug and socket assy , tool kit,ija-0866,bucket water canvas 6 , tool kit,cvd-30166/2,anchor hold fast spikes , tool kit,cvd-30166/3,anchor hold fast shackle , tool kit,cvd-f8043900,head lamp rh , tool kit,30166/1,anchor hold fast bar , tool kit,cvd-x4703411,12.7 sq drive offset handle 200 long , tool kit,ifa-1840,hammer sledge straight peen , tool kit,cvd-x2305900,body lamp , tool kit,cvd-512099-8030263,tyre lever t/l5 a , tool kit,cvd-x2302600,fog lamp with bulb 24v 60w yellow lens , tool kit,coiq-17082a,block jack , tool kit,4002000st7100,combination plier 180 mm

Central Government And Public Sector

CTN :45280929

01 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of allen key 8 mm , allen key 10 mm , allen key 22 mm , slugging wrench , slugging spanner , reversible ratchet handle half inch , reversible ratchet handle three fourth inch , torque wrench , outside micrometer , soft face hammer 40 mm with steel handle , center punch , straight air drill machine , air grinder , measuring tape , tungsten rotary cutter 6x5mm , tungsten rotary cutter 6x13mm , tungsten rotary cutter 6x10mm , flat file , half round file single cut grades of cut second , half round file single cut grades of cut bastard , half round file double cut grades of cut second , half round file double cut grades of cut bastard , needle file , cutting wheel , grinding wheel or dc wheel , gas cutting torch , welding rod ms 7018 36 h , welding rod ss 308 , welding rod ss 309 , emery paper grade 120 , emery tape fine grade , cleaner , developer , penetrant , rustolene rust disintegrator , wire brush , tefflon tape , tig electrode , air hose pipe wire embadded , masking tape 50 mm , ss wire 1.6mm , ss wire 2.4mm , masking tape 75 mm , half inch impact hexagon bit socket 6 mm drive , half inch impact hexagon bit socket 8 mm drive , half inch impact hexagon bit socket 14 mm drive , half inch impact hexagon bit socket 17 mm drive , size 19mm three fourth inch drive socket 12 point , jack up bolt m10 x 150mm , jack up bolt m12 x 150mm , jack up bolt m16 x 150mm , buff flap wheel , 11mm deep socket 6 point , combination plier , circlip plier set , hydraulic hand pump , hydraulic jack button type , hydraulic jack with hand pump , air micro grinder 120 degree angle grinders 3 collet , air micro grinder 90 degree angle grinders 3 collet , curbide rotary burrs 5x10 mm , curbide rotary burrs 3x15 mm , oil stone size 150mmx50mmx25mm fine grade , klinger gasket 1.5mm, non metallic , tinsnips , cylindrical grinding stone 10x20 mm , taper grinding stone 10x20 mm , taper grinding stone 21x50 mm , cylindrical grinding stone 20x50 mm , chain hoist , triple boiled linseed oil sealing compound , premium polyester rope , dowsil rtv sealant 736 , pneumatic connector with coupling allen key 8 mm,size: lenghth of the long arm=100 mm, lenghth of the short arm=36 mm, moc: chrome vanedium steel, black finsh, allen key 10 mm,size: lenghth of the long arm=112 mm, lenghth of the short arm=40 mm, moc: chrome vanedium steel, black finsh, allen key 22 mm,size: lenghth of the long arm=200 mm, lenghth of the short arm=80 mm, moc: chrome vanedium steel, black finsh, slugging wrench, size: 1 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, slugging spanner, size: 3/4 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, reversible ratchet handle 1/2'',head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, reversible ratchet handle 3/4'', head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, torque wrench, 1/2 inch square drive, 7-35 kg, widtht: 50 mm, height: 29 mm, length: 805 mm (approx. ), weght: 3.9 kg (approx. )., torque wrench, size :1/2 inch square drive, 25- 135 nm, torque wrench, size :1/2 inch square drive, 50-220 nm, torque wrench, size :3/4 inch square drive, 135-675 nm, outside micrometer, range (200-225)mm, graduation: 0.01mm, material of the frame: stainless steel, material of the spindle and anvil: hardened stainless steel, soft face hammer 40 mm with steel handle, center punch, length: //bid details 2 / 59

Doe Spanner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector