Latest dome scrap Tenders | Government dome scrap Tenders

Central Government/Public Sector

CTN :45738292

22 Jul, 2026 NA

Goa - Goa

Tender For supply of multidrone building platform with ground control station and software simulation , drone building with ai modules, fabrication tools, testing equipment, etc.

Central Government/Public Sector

CTN :45224648

02 Jul, 2026 12.00 Lacs

Bangalore - Karnataka

Tender For bid to ras tender for supply of fabrication and supply of luh 62 composite parts including painting- top fwd cover sub assem. lh , top fwd cover sub assem. rh , baggage bay panel sub assem. lh , baggage bay panel sub assem. rh , side shell top panel sub assem. lh , side shell top panel sub assem. rh , bottom aft cover sub assem. lh , bottom aft cover sub assem. rh , bot. longeron subassem. lh , bot. longeron subassem. rh , top aft cover sub assem. lh , top aft cover sub assem. rh , longeron assembly lhs , access cover sub assem. lh , access cover sub assem. rh , longeron assembly rhs , panel sub assem. 6 to 7 lh , panel sub assem. 6 to 7 rh , cover sub assem. 6 to 7 lh , cover sub assem. 6 to 7 rh , access panel 6 to 7 rhs , bottom bay panel between 6 & 7 rh , bottom bay panel between 6 & 7 lh , panel assem. x2765 to 3 rh , top bay panel between 5 and 6 lh , top bay panel between 5 and 6 rh , access panel sub assem rhs , access cover sub assem. , l angle assem x2765 to 3 lh , l angle assem x2765 to 3 rh , panel assem. x2765 to 3 lh , access panel sub assem. 2 to 3 l , access cover sub assembly 1 , mip support bracket , mip support bracket , clip assembly lh , clip assembly rh , equipment panel sub.assem.middle 8 , top longeron betw. 5 and 6 lh , top longeron betw. 5 and 6 rh , top center cover sub assem. at 7 , access panel sub assy , nose glass support structure lh , nose glass support structure rh , pump cover assembly 4 to 5 , collector box cover assembly , channel assembly lh , channel assembly rh , clip lh , clip rh , cover assembly , cover assembly lh , cover assembly rh , collector box sub assembly , vent box door lh , vent box door rh , forward fairing , aft fairing , center fairing top , center fairing bottom , longer step assembly skid , bottom shell sub assem. 2 to 3

Central Government And Public Sector

CTN :45539385

07 Jul, 2026 47.74 Lacs

Angul - Odisha

Tender For corrigendum : fabrication and erection of structural steel cs and ss piping and insulation work of equipment and piping at hwbf talcher

CTN :45468954

02 Jul, 2026 NA

Dantiwada - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; fabrication group equipment/machinary; service provider

CTN :44676007

01 Jul, 2026 19.81 Lacs

Kalpakkam - Tamil Nadu

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 1 installation of scaffolding around chimney for height work above 10 m; as per tender conditions,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 2 supply of structural steel items from sail / rinl / jindal / tata and fabrication as per drawings, including inspection, non-destructive test etc..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 3 fabrication, installation of platform and support of chimney and strengthening of ladder works including marking, cutting, shifting, machining, t..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 4 paint supply, surface preparation and painting of 1 coat of epoxy zinc phosphate primer to 50 micron (minimum) and 2 coats of epoxy cured polyamid..,repair, maintenance, and installation of plant/ systems/equipment

Central Government / Public Sector

CTN :45692575

16 Jul, 2026 5.42 Crore

Panipat - Haryana

Tender For engineering, detail engineering, manufacturing, supply, fabrication, erection, painting, testing and commissioning of ro skid with associated equipment for augmentation of existing dmro plant, along with associated jobs at pnc on lump sum turnkey basis. - rfq item no.00010 augmentation of existing dmro plant at p, for details of items refer sor given in letter inviting tender, which is part of "scc technical" of tender document.

Central Government And Public Sector

CTN :45680212

20 Jul, 2026 NA

Multi City - Multi State

Tender For (a) design, fabrication & construction of peb (pre-engineered building) structure for testing lab, inspection record room, equipment room, including other accessories at njp/pno/scl in connection with bridge rehabilitation works on n f railway.(b) construction of shed for storage of uc span railway bridge components of 6x155', 1x258' & 1x338' at njp

corporations/Associations/Others

CTN :45667085

29 Jun, 2026 NA

Faridabad - Haryana

Tender For fire work at esic haryana. - (a) supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required :(b) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted typewith class-f insulation, conforming to is-325.(d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plasteredwith anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required:(diesel driven pump)(b) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event offault with audio indications, painted with post office red colour etc. as required.(d) m.s fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.(e)suitable cement concrete foundation duly plasteredand with anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump)(b)horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520.(c) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325.(d) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm @70m head, fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :, incomings630a, 50ka 4 pole mccb, ics=100% icu rating digital voltmeter 0-500v with selector switch ammeter (0-630 a) with selector swtich & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 800amps outgoings (note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump200 amp, 50ka tpn mccb, ics=100% icu, with f

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

CTN :45665789

15 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For expression of interest of equipment for setting up a 2mwh cell fabrication line for cylindrical and prismatic cells supply, installation, commissioning, demonstration, testing, training of 2mwh cell fabrication line

Dome Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government And Public Sector

corporations/Associations/Others