Latest door pin Tenders | Government door pin Tenders

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

Central Government/Public Sector

CTN :45487050

15 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For supply of heavy duty steel almirah for rpf barracks with details specification as - (1)item name-heavy duty steel almirah for rpf barracks.(2) applicable standard is: 3312:2021 for steel wardrobes/cabinets/lockers. (3) material crca steel sheet conforming to is 513 (part-1):2016. (4) type of constructionwelded construction, (5) installation type free standing, (6) number of doors-02 nos. (7) door type hinged type, (8) locking arrangement 3-way locking system with built-in handle and locking arrangement, (9) internal locker one internal locker with separate lock, (10) number of shelves minimum 04 adjustable shelves, (11) hanging arrangement one hanging rod for uniforms/clothes, (12) ventilation ventilation louvers on both sides, finish epoxy polyester powder coated finish, (14) colour grey / olive green / as approved by consignee, (15) height 1980 mm plus minus 20 mm, (16) width 900 mm plus minus 20 mm, (17) depth 480 -500 mm, (18) thickness of side sheet minimum 1.0 mm, (19) thickness of back sheet minimum 1.0 mm, (20)thickness of top & bottom minimum 1.0 mm, (21) thickness of door sheet minimum 0.9 mm, (22) thickness of shelf minimum 0.9 mm, (23) thickness of stiffeners minimum 1.0 mm, (24) hinges heavy duty ms hinges, (25) shelf load capacity minimum 40-50 kg udl per shelf, (26) surface treatment anti-rust chemical treatment before powder coating, (27) powder coating thickness minimum 40-50 microns, (28) workmanship smooth finish, proper welding, no sharp edges/burrs, (29) keys 02 duplicate keys per almirah, (30) marking manufacturer name, month/year of manufacture, (31) warranty as per irs terms and condition,(32) inspection by consignee/railway representative, (33) packing suitable packing to avoid transit damage, (34)delivery at rpf barrack/consignee store [ warranty period: 30 months after the date of delivery ]]

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

CTN :45484519

18 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For supply of fabrication of free standing partition panel , fabrication of door frame and shutter section , fabrication of aluminium composite panels , ss screw , brackets , hinges , aluminium door panel , table glass

CTN :45484687

18 Jun, 2026 NA

East Khasi Hills - Meghalaya

Tender For supply of cp kitchen sink mixer prayag , wire mesh 0.56 mm 15 mtr each roll , kitchen plate rack ssteel 31inch x 30inch , fancy curtain rod 3 mtr , fancy curtain bracket , center hole basin mixer without popup cp , hydraulic door closer , front glass shelves 500x125mm , bracket for curtain rod long neck , tower bolt alu 200 mm , ss wire mesh 0.36 mm dia 15mtr each roll 1.40 mm apreture , tower bolt alu 150 mm ipssa , glass pane 2ft x 4ft x 4mm frosted glass , kitchen sink stainless steel 940x 460x 203mm bowl size 405x 354x 203mm with drain board , door seal bottom, door air gap rubber shield 36inch x 93 cm, anti rust, brown colour, black rubber , glass panes 2ft x 4ft x3mm clear glass , m seal in 1 kg pack , helical door spring ipssa , sliding door bolt alu 250 mm ipssa , mortrise lock brass godrej , c p waste coupling 32 mm for sink. , tower bolt ssteel 150 mm ipssa , cp grating rectangle slots with round grating at middle 150x150mm , cp grating 100mm dia with one big hole , waste coupling for sink 32 mm , sliding door bolt ms 300 mm ipssa , curtain rod 19 oblique 20mm 3mtr long , kitchen sink 610mm x 460mm x 203mm bowl size 560mm x 405mm x 203mm , cp grating 100mm dia with normal hole , tower bolt alu 100 mm ipssa , kitchen sink bowl size 560mm x 405mm x 203mm , butt hinges 100 mm , bow handle alu 100 mm ipssa , sliding door bolt alu 300 mm , bow handle 150 mm alu ipssa , teflon ptfe tape roll thread seal tape , nut and bolt for steel window for fixing of wire mesh , butt hinges 75 mm , brass sliding bolt 200mm , bow handle 200 mm alu ipssa , decorative curtain rod finials wooden , cp grating 100mm dia with rectangle slots , brass tower bolt 100mm , brass bow handle 100mm , door stopper alu prayag , hasp and staple c p 100 mm ipssa , alu handle 125mm ipssa , hasp and staple cp 75mm //bid details 2 / 40

CTN :45478356

29 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of copper sulphate , u/g cable armoured , mcb , socket piano modular type , u/g cable armoured , bell push , u/g cable armoured , plug top , lamp holder , lamp holder , kitchen sink with drainge board , glass pane , wire mesh , aluminium door closer , brass cp hand shower rose with pvc tube , wc seat cover (pvc) white colour , pvc cover , glass pane , glass pane , ptmt angle stop cock , bronze angle cock with flange , pvc connection , cp brass conceled spindle with cp head , pvc waste pipe , float valve , brass spindle for concealed stop cock , ss sliding door bolt , cp grating , rubber beading , ptmt stop cock , internal kit complete , gate valve , piller cock , ss handle anodised , ss sliding door bolt with hasp , ss anodised tower bolt , ss anodised hasp and staple , putty oil for glass pane , butt hinges ss , pvc waste coupling , butt hinges ss , fancy type decorative pvc sheathed gi curtain hanging rod , ss bracket chromium plated for curtain rod 19mm to 20mm , brass cp concealed stop cock , brass washer jumper 20mm qty 100 nos eact packet , brass washer jumper 15mm qty 100 nos eact packet , pvc shelf , ss cromimum bracket for 25mm dia , telescopic channel set 20 inch , telescopic channel set 22 inch , pvc 18mm thick both side plain board , damproof paint raincoat

CTN :45468948

16 Jun, 2026 NA

Ananthnag - Jammu And Kashmir

Tender For supply of wiper arm , wiper blade , wiper mechanism , door hinges heavy , oil filter mpv , knuckle bush , thrust washer , suspension kit front , suspension kit rear , brake pad rear , front brake pad , abs sensor front , front axle 4x4 , hydralic pipe 22x22 , stabilizer bar set bp , stabilizer bar normal , injector repair , handle door inside rh , oil filter , repair of housing front axle joint cross left , clamp big , clamp medium , clamp samll , hub lock plate

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45457106

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of painting and hardware material glass panes, plyboard,cement , sand for quarter no. q-08 punjabi university - oil bound distemper,wall care putty , neel , sandpaper, universal water stainer tube yellow oxide , s/e white paint , s/e oxford blue paint ist quality , fevicol ddl , t.t. oil , paint brush , wire netting , commercial plywood , conduit pipe , palmet patti, iron door spring , glass panes , glass putty , aluminium tower bolt , aluminium handle, m.s. screw , m.s. hinges aluminium sheet , m.s. nails ,m.s. black nails , fevicol sh ,aluminium double door stopper , kail wood, aldreen t.c. ,cement bags ,p.o.p. , malmal, lime ,coarse

CTN :45457117

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for replacement of doors and glass panes of physics, nss and pharmacy departments at pup - flush door , m.s. hinges, aluminium tower bolt , aluminium handle , m.s. screw , m.s. nails , c.p. sliding bolt , m.s. nut bolt ,glass panes ,glass putty etc..

Door Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government