Latest door assembly Tenders | Government door assembly Tenders

Central Government/Public Sector

CTN :45735439

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of cubicle door assembly complete for emu2/ac coaches to drg no. emu2/dmc/ac(805)-5-6-002, col-1,alt-nil [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733183

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as mg/bg carriage frames, coach battery box ,tension spring, seat frames of different sizes, berth frames, wheel stand, tie bar gate, ms gate, battery box, empty electrical box, ms window, ms window, hand trolley, hydraulic trolley, gi re mast, window grills, ms grills, ms stands, rolling shutters and partition frames of coaches , wheel stand, suspension rods , foot step, ms boxes, luggage rack, ms pipes, ms cylinder, cut parts of coaches, zinc sheet, transformer body, coach sheets, point machine cover, iron rods, trolley, ms wire, bolt & nut and other nmg coach cutting scrap items coming under ms items with/without ss, plastic, electrical and other nfs attachments on as is where is condition, available under the custody of cdms 08 ward ap. note: pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. note: cutting permitted up to loadable size only ( loc: bin no. 132 at scrap yard)

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

corporations/Associations/Others

CTN :45728413

06 Jul, 2026 NA

Kheda - Gujarat

Tender For auction sale of scrap alternator/ starter motor,scrap ac compressor,scrap motor (blower+radiator fan+wiper),radiator and condenser scrap with attached al pipe,e-waste with speaker,scrap - tyres with rim,scrap - tube,scrap nut & bolt,scrap - defaced engine (4w-steel 80%),scrap - defaced engine (cv),mix steel with chassis scrap,scrap steering column,steering rack,front shocker with spring & rear shockers,empty catcon,bale body (bundle),doors assembly and trunk lid assembly,scrap - plastic (bumper + black pp+hd+dashboard+acralic),scrap - rubber(pcb_ catagory)

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45488511

07 Jul, 2026 28.67 Lacs

Meerut - Uttar Pradesh

Tender For corrigendum : special repair of building no p-97 of 8 ew and provn of 300 mtr security chain fencing with 03 x iron gate of 414 network signal coy at dabathwa under ge (u) meerut cantt.

Central Government And Public Sector

CTN :45737013

03 Aug, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of door assembly (double link) for bobrn wagon as per drg. no.-wd-96038- s-03,alt-7. orlatest assembly consisting of item as per following-item no.-1.-door flap qty..02 nos. item no.-2- modified forged hinge qty.-04 no., item no.-6 door hold pressing qty.-01 no, item no.-7 door hold stiffener qty.-01 no, item no.-8 door hold pressing rib qty.-04 nos, item no.-9 door clip qty.-1l+1r, item no.-11door hold top stiffener qty.-01no,item no.-12 door flap stiffener(long) qty.-04 nos, item no.,-13 door flap stiffener(short) qty.-04 no, item no.-18 door hold stiffener pressing qty.-01 no. (all items are in assembled condition). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45700363

04 Jul, 2026 NA

Faridabad - Haryana

Tender For inviting the quotations for fixing building materials rates - sanitary - district faridabad - cp waste jali, m seal 100gm, teflon tape, elbow 1/2" gi (mac/unik), elbow 3/4" gi (mac/unik), elbow 1° gi (mac/unik), tee 1/2" gi (mac/unik), tee 3/4" gi (mac/unik), tee 1" gi (mac/unik), socket 1/2" gi (mac/unik), socket 3/4" gi (mac/unik), socket 1" gi (mac/unik), union 1/2" gi (mac/unik), union 3/4" gi (mac/unik), unoin 1" gi (mac/unik), pipe 1/2" gi (jindal/ravindra), pipe 3/4" gi (jindal/ravindra), pipe 1" gi (jindal/ravindra), plug 1/2" gi (mac/unik), plug 3/4" gi (mac/unik), plug 1" gi (mac/unik), nipple 1/2" x 2" long gi (mac/unik), nipple 1/2" x 4" long gi (mac/unik), nipple 1/2" x 12" long gi (mac/unik), nipple 3/4" x 2" long gi (mac/unik), nipple 3/4" x 4" long gi (mac/unik), nipple 3/4" x 6" long gi (mac/unik), nipple 3/4" x 9" long gi (mac/unik), nipple 3/4" x 12" long gi (mac/unik), nipple 1" gi (mac/unik) (all sizes), pipe pvc 3" pvc 6 kg pressure tirupati isi or equivalent, pipe pvc 4" pvc 6 kg pressure tirupati isi or equivalent, socket 3" pvc tirupati isi or equivalent, socket 4" pvc tirupati isi or equivalent, p trap" pvc tirupati isi, orissa pan 23" (hindware/cera/periware/lovato), orissa pan 21" (hindware/cera/periware/lovato), pvc cistern (hindware/cera/periware/lovato), english seat complete set with cistern, waterjet etc, e.w.c. seat cover, long nose (swan nack) or equivalent (plastic/cp non-branded), big cock 1/2" or equivalent (plastic/cp non-branded), ball cock 1/2" (paras or equivalent), ci manhole cover 18" x 18", ci manhole cover 12" x 12", ci stop cock, soot gola, angle iron set, 2" pvc bend (tirupati/prince), 3" pvc bend (tirupati/prince), angle valve c.p (paras), c.p hex nipple, c.p extension 1", c.p extension 2", flunch c.p, urinal waste pipe, pipe hook, safeda 100g m-seal, blade hexa, solvent 50ml, solvent 200ml, concealed cock c.p (paras), gate valve 1/2" (gun metal), gate valve 3/4" (gun metal), gate valve 1" (gun metal), ball cock 1/2" (gun metal), pvc pipe 1/2" plumbing pipe (tirupati/prince), pvc pipe 3/4" plumbing pipe (tirupati/prince), pvc pipe 1" plumbing pipe (tirupati/prince), cpvc pipe 3/4" 11 s.d.r. (tirupati/prince) or equivalent, cpvc pipe 1" 11 s.d.r. (tirupati/prince) or equivalent, cpvc pipe 1.1/4" 11 s.d.r. (tirupati/prince) or equivalent, gi tank nipple 1/2" (mac), gi tank nipple 3/4" (mac), gi tank nipple 1" (mac), pvc connection 1.5", pvc connection 2", pvc connection 36" long, seat cover (jindal), seat cover (hydrolic/jindal), 200 ltr. capacity water tank, 300 ltr. capacity water tank, 500 ltr. capacity water tank, 750 ltr. capacity water tank, 1000 ltr. capacity water tank, 1500 ltr. capacity water tank, 2000 ltr. capacity water tank, labour of plumber g.i/pvc 1/2" fitting, labour of plumber g.i/pvc 3/4" fitting, labour of plumber g.i/pvc 1" fitting, labour of w.c seat fitting, labour of wash basin fitting, labour of urinal fitting, labour of e.w.c seat fitting, labour of p.v.c pipe 4" & 3", pvc bend/elbow 4" isi (tirupati or equivalent), pvc bend/elbow 6" isi (tirupati or equivalent), pvc bend/elbow 8" isi (tirupati or equivalent), pvc tee 4" isi (tirupati or equivalent), pvc tee 6" isi (tirupati or equivalent), stainless steel sink (jindal) size 24" x 18" x 9", 1/2" tunty (brass)/ball valve, 3/4" ball valve gun metal, 1" ball valve gun metal, pvc floor trap 100mm tirupati, pvc floor trap 75mm tirupati, pvc tee 75mm tirupati, pvc elbow 4" x 3" tirupati, pvc tee 4" x 3" tirupati, pvc reducer 4" x 3" tirupati, pvc connection 24" (paryag), grating jali 110mm (jindal/sobhai), baby sheet w.c white colour (cera and hindware or equivalent), submersible motor 1 hp isi (allwyn,perfect,oswal), submersible motor 1.5 hp isi (allwyn,perfect,oswal), end cap 4" pvc tirupati, end cap 3" pvc tirupati, end cap 6" pvc tirupati, end cap 8" pvc tirupati, pvc pipe 160mm isi 4 kg pressure (6 mtr length) tirupati/supreme, make, pvc pipe 160mm isi 6 kg pressure (6 mtr length) tirupati/supreme, ma

CTN :45473155

03 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of lavatory butterfly door assembly with complete fittings as per rcf drawing no. ed63037 alt nil for three tier economy coaches of indian railways. [ warranty period: 30 months after the date of delivery ] ]

CTN :45743743

03 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of lavatory butterfly door assembly with complete fittings as per rcf drawing no. ed63037 alt nil for three tier economy coaches of indian railways. [ warranty period: 30 months after the date of delivery ] ]

Door Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector