Latest door clip Tenders | Government door clip Tenders

Central Government/Public Sector

CTN :40478624

05 Jun, 2025 NA

Ropar - Punjab

Tender For supply of advance process control in ammonia plant - hardware and licensed software items required for apc implementation , engineering charges , installation and commissioning charges , lining up amc in future charges for the first year amc , charges for the second year amc , charges for the third year amc , charges for the fourth year amc , charges for the fifth year amc

corporations/Associations/Others

CTN :40478291

16 Jun, 2025 60.0 Thousand

Kollam - Kerala

Tender For providing of annual maintenance contract of integrated security and surveillance system - the comprehensive maintenance contract will cover all cctv equipment, including cameras, dvrs, network switch and monitors, as well as all associated cables and connectors. the contract will also cover any software updates or upgrades that may be required to maintain the system's performance and security. the scope of work in the tender includes the comprehensive annual maintenance contract (camc) for cctv system installed at esic sro kollam. comprehensive amc means the analysis of breakdowns/faults in the hardware and repairing/service is taken care of by the service provider. this includes replacement of spare parts. apart from this, preventive maintenance is also done, on a pre-determined/agreed-to frequency. the camc includes the cost of replacement, rectification, repair and servicing of all items inclusive of all taxes/duties/octroi etc.. the contractor shall not be entitled to assistance either in the procurement of raw materials required for the fulfilment of the contract or in the securing of transport facilities which they have to arrange on their own. the maintenance works covered under the scope of this tender shall be carried out by qualified and experienced personnel of the contractor holding the relevant competency certificates.

CTN :40510874

16 Jun, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of hardware items for fixing stainless steel air reservoir (150 ltrs). 1. hex. hd. sc rew m16 x 50 - 8.8 conforming to is specification is: 1364, part-2 2002 and to icf drawing no. icf/std-3- 5-066, item- 11, alt.-c/nil. qty.- 04 nos/set. 2. hex. nut m16 - 8 conforming to is specification is: 1364, pa rt-3 2002 and to icf drawing no. icf/std-3-5-066, item-12, alt.-c/nil. qty.- 04 nos/set. 3. hex. thin nut m 16 - 05 conforming to is specification is: 1364, part-4 2003 and to icf drawing no. icf/std-3-5-066, item- 13, alt.-c/nil. qty.- 04 nos/set.. 4. plain washer 16 conforming to is specification is: 2016-67 tab.-2, typ e-a & is:1977-96 fe 330 and to icf drawing no. icf/std-3-5-066, item-14, alt.-c/nil. qty.- 04 nos/set. make -tvs/dfl/unbrako/tuff [ warranty period: 30 months after the date of delivery ]

CTN :40501691

11 Jun, 2025 NA

Koderma - Jharkhand

Tender For registration of firm for various procurement and services- - 1. electrical items 2. electronics items 3. computers & its accessories 4. furniture items 5. building hardware items 6. plumbing items 7. photography (still/video) poster/banner/acp board/ digital board / printing 8. ration items 9. kitchen equipment 10. sports items / trophy 11. lab items 12. sanitary / gardening items 13. medicine / surgical items 14. fire equipments 15. stationery items 16. beverages / bakery items 17. animal food items 18. swimming pool items 19. housekeeping items 20. miscellaneous items

CTN :40483815

05 Jun, 2025 10.0 Thousand

Dharmapuri - Tamil Nadu

Tender For tender notice for purchase of hardware items and others - nylon twisted industrial brush dia* 6 mm x length* 75 mm & 4 mm male thread, nylon twisted industrial brush dia* 8 mm x length* 100 mm & 6 mm male thread, nylon twisted industrial brush dia* 10 mm x length* 100 mm & 8 mm male thread, nylon twisted industrial brush dia* 12 mm x length* 100 mm & 10 mm male thread, tefflon tape, size: 12 mm x 0.1 mm x 12 meter length, material: ptfe (packet - 10 pieces), wooden hand steel wire brush 290 length x 30 width x 15 mm height, carborundum universal emery sheet (cloth) - 50 rough size : sq.ft, carborundum universal emery sheet (cloth) - 120 medium size: sq.ft, carborundum universal emery sheet (cloth) - 400 fine size: sq.ft, ag-4 cutting wheel brand : boschsize : 100 x 1.2 x 16 mm (packet - 10 pieces), ag-4 buffing wheel x433 standard for metal flap disc brand : bosch size : 100 x 16 mm, grit 60

CTN :40483894

05 Jun, 2025 60.0 Thousand

Dharmapuri - Tamil Nadu

Tender For tender notice for purchase of rubber joint sheet and hardware items - 1/8" rubber joint sheet white colour, anabond 412 100 ml pack, anabond 112 100 ml pack, m seal (100 grm. packet), hi - cut precision dc wheel size: 180mm x 6mm, emery sheet rough size: 12" x 12" corborandam universal make, emery sheet smooth size: 12" x 12" corborandam universal make, pure cotton waste without mixing any nylon, rubber bush id 22mm x od 35mm x 50mm long, 1/4" x 2" m.s split pin, 3/16" x 1 1/2" g.i. split pin, 1/4" x 2 1/2" g.i split pin, f224 sand disc paper grit - 60 size: 178 x 22.22 x 2mm, ag - 5 grinding stone wheel, ag - 7 grinding stone wheel, ag - 5 cutting wheel, unique make rubber tyre 2112 (tc12), unique make rubber coupling tyre 3310 (tc16), unique make rubber coupling tyre 3409 (tc17), fenner make f60 tyre coupling set with 10mm pilot bore

CTN :40491365

12 Jun, 2025 NA

Chandigarh - Chandigarh

Tender For supply of hardware items - plaster of paris , emulsion paint 20 ltr , emulsion paint white 20 ltr , weather coat 20 ltr , plywood 19 mm , water proofing chemical , floor spring , gypsum board 12.5 mm , pvc fastner 10x160 mm , sand , paint remover surface protector , touchwood glossy finish , touchwood mash finish , spirit , laakhdana , thinner 5 ltr , silicon clear , silicon black , gypsum board jointing compound , fevicol , silicon gun , hammer drill bit , white cement , wall putty

CTN :40377399

02 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : rates for supply of electrical spares and minor stores/hardware items from the original equipment manufacturer, their authorized dealer/local representative or local ssi units or registered firms/suppliers already in the trade for the year 2025-26

CTN :40221359

07 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : rate contract for supply of electrical spares n minor store/hardware items, as given in the detailed boq, from govt approved reputed experienced competent n financially sound electrical contractors/firms/suppliers/joint ventures/executors/oems - part: (a) 132kv transmission lines (material ), al. alloy as per is: 617 of 1975 pg clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra conductor (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)., p g clamp for acsr panther conductor as per relevant is/iec amended upto date and of reputed/standard make, p g clamp for acsr moose conductor as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic ct clamp (universal take off) for panther conductor with ct terminals suitable for 132kv/33kv cts as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (universal take off) of panther conductor with pad terminals suitable for 132kv /33kv isolators as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132kv /33kv isolators as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic breaker pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132kv /33kv breakers of sf 6 type-abb,cgl, siemens, bhel/vcb type- s&s, gec alsthom, bhel, abb, siemens, megawin etc as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic ct pad clamp (universal take off) for twin acsr zebra conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv ct as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic twin isolator pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin acsr zebra conductor with conductor spacing 300mm and isolator pad clamp terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv isolator as per relevant is/iec amended upto date and of reputed/standard make, bimetallic ct pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant is/iec amended upto date and of reputed/standard make, bimetallic breaker pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv /33kv isolator of reputed/standard make, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for single panther conductor of reputed/standard make, t-clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr -panther-acsr panther conductor of repute

CTN :40484620

06 Jun, 2025 NA

Sundergarh - Odisha

Tender For supply of hardware kits of traction motor type- 6fra 6068 consists of 29 items in 4 kits as per an nexure-- (1) spec. no.- 4tms.096.073 (rev.-1) , (2) spec. no.- 4tms.096.074 (rev.-1) , c & d no.-5780/ 091, (3) spec. no.- 4tms.096.077 (rev.-1) c & d no.-5780/089, (4) spec. no.- 4tms.096.075 (rev.-1) , ( alt.-1) [ warranty period: 30 months after the date of delivery ]

Door Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others