Latest door latch Tenders | Government door latch Tenders

State Government

CTN :45325008

02 Jun, 2026 NA

Nadia - West Bengal

Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x

Central Government/Public Sector

CTN :45347699

15 Jun, 2026 9.99 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of ms sheet , aluminum sheet , aluminum checker plate , araldite and hardener , buffing wheel , cutting wheel , drill bits set ss 1 to 5mm , emery paper , emery wheel , metal primer , m seal , steel handle , teflon tape , wd 40 , beading wooden flat , bolt nut ss full threaded with washer , bolt nut ss full thread with washer , brazing rod aluminum , clamp for pipe gi , curtain rod aluminum , curtain rod centre clip bracket , curtain rod ss , electrode aluminum , electrode ms , electrode ss , fevicol sr , filler rod brass , filler rod lead , handle aldrops ss , handle aluminum , hinges brass , hinges ms , hook aluminum , hook curtain knob , nails , nylon belt velcro , pipe curtain , rivet flat ms , rivet aluminum , screw , screw brass , sheet gi , split pin , varnish , washer ss , battery for multimeter , double side stick tape , cotton tape , hardener , loctite rtv silicon , loctite , antirust spray , anabond 666 , emery sheet , hack saw blade , distilled water , drill bit 1mm to 10mm , fevi quick or quick fix , insullation tape pvc , soldering iron , soldering flux , devocon putty alluminium , wooden beading half roud , hinges ss , wood primer 01 ltr , wax , l clamp ss , circular saw cutting blade , acrylic pasting glue , window or door latches hook , clamp for board , curtain bracket ss , alluminium sheet , gi sheet , pop rivet , self drilling screw , pin nails , chopsaw cutting wheel , acrylic sheet ) /bid number : gem/2026/b/7544599 * /dated: 27-05-2026 & & / bid document 1 / 75

Central Government / Public Sector

CTN :44561247

30 May, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of hardware carpentry material requirement c c - hardware_carpentory item chap konda security door guards , auto hinges small cupboard , 3 hinges for small cupboard shutter , 4 hinges plywood doors , drawer handle 5 , main door handle 6 , ambroasian tape , door latch tadi patti 10 , aldrop for door 10 , tower bolt 6 , door nut bolt bugdi , mosquito net , batten patti 1 , 32mm flush door 36 x 81 , welding rod , plywood 12 mm 4 x 8 , plywood 18 mm 4 x 8 , plywood 6 mm 4 x 8 , plywood 8 mm 4 x 8 , sunmica 1mm thk , fevicol container , araldite tube 180 gram , hexa blade , curtain socket , curtain rod , cloth hanger 6 hooks , door stopper , nails 14 no x 1.5 , nails 14 x 2 , nails 17 no x 1.25 , nails 19 no x 0.333 , nails 14 no x 1 , screw 50 x10 , screw 60 x 10 , screw 35 x 10 full thread , screw 35 x 10 half thread , full thread screw 35 x 8 , full thread screw 25 x 8 , full thread screw 19 x 10 , bathroom door bolt 3 , main door 32 x 81 , batten patti 0.20 x 0.5 , door magnet for cupboard , door closer , steel cutting blade , wooden cutting blade , drawer lock , steel welding rod , steel welding spray , concrete nail 3 , concrete nail 2 , concrete nail 1.5 , concrete nail 6 , binding wire

CTN :45332692

05 Jun, 2026 NA

Gurdaspur - Punjab

Tender For supply of assy rear door latch lh , steering wheel nut puller , switch assy change over , switch assy combination , regulator assy , 2 pole isolator switch , brush carrier assy , field coil , main relay , rubber hose , side cover gasket

CTN :45349047

09 Jun, 2026 NA

Ri Bhoi - Meghalaya

Tender For supply of long body 15mm , full thread screw 25 mm 250 grm each , fevicol sh 1 kgs pack , french polish , curtain rod holder lattu 20mm silver , toilet paper holder with stainless steel flap 15mm , oil putty for glazing , sliding door bolt alu 300mm , cpvc pipe 15mm , knob for side board dressing table writing table etc , cpvc mta brass 20mm , cement opc 50 kgs each bags , seat and back for chair school bucket type , paint enamelled black in 1 ltrs pack high glossy , pvc seat and back for chair verandah offrs , cpvc solvent cement 100ml , ball casters size 50 mm without plate 05 nos in each set , wooden beads for fixing glass 2nd class seasoned size 10 mm x 10 mm x 1 mtr long , cpvc brass elbow 15mm prayag , melamine high glossy , magnetic catcher , nipple gi 15 mm 2 long , cpvc socket brass 20mm prayag , cpvc mta brass 15mm , masonary screw full thread 20mm 250 grm eachh , pvc shelf heavy duty 450 mm , dendrite 1 ltrs pack , cpvc pipe 20mm , nipple gi 15 mm 4 long , cpvc fta brass 20mm , cpvc ball valve 20mm , cloth mal mal or cheese cloth , nails wire steel 75mm 1 kg each , ms screw wood 35 mm x 8 gauge 100 noseach , m seal , ms screw wood 25 mm x 8 gauge 100 nos each , helicol door spring 150 mm , cpvc plain elbow 20mm , distemper oil bound white , cpvc socket brass 15mm , grating pvc 125 mm , gi elbow 32 mm dia isi marked 3 way medium grade , spirit denatured 5 ltr pack , flat beading pvc 12x6mm 6long , cpvc socket plain 20mm , white cement , painting brush 75mm , painting brush 50mm , cpvc plain tee 20mm , pvc flush bend 40 mm , cpvc plain elbow 15mm , nails wire 40mm 100 grm each , painting brush 100mm , haps and stapple alu 100 mm , ms wood screw 30mm 100 grm each , aluminim channel double for dressing table ladies , nylon sleeve 35mm pvc wall plug , hacksaw blade , nails wire steel 50 mm 100 gram each , sand paper no 150 mm , cpvc pipe clip 20mm , cpvc union plain socket 20mm , nails wire steel 25 mm 100 gram each , nails wire steel 100mm , gi plug 20 mm , cpvc fta plastic 20mm , cpvc end cap 20mm , grating cp 100 mm with hole , hackssaw blade 300 mm

CTN :45338827

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of lavatory door latch assembly as per rcf drg. no. lw56537 alt. nil, material and specification as per drg. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45293979

08 Jun, 2026 2.99 Lacs

Ranchi - Jharkhand

Tender For repairing of bucket door, latch keeper, latch leaver and bush fitment in bucket, bucket door, dipper stick and bell bar, line boring 04 nos. hole of stick assembly, fitting of 04 bushes in stick assembly, bucket teeth removal, gauging, welding, grin

CTN :45317846

05 Jun, 2026 NA

Alwar - Rajasthan

Tender For supply of cam shaft , regulator , pivot bush , nozzle , bty cutoff circuit breaker , injector nozzle , housing friction clutch , electric fan , assy kit lined shoe , bonnet shocker , rubber hose air filter , ac filter , door sensor , combination switch , door lock central , compresor oil , ac blower , rep kit front spring brake , door handle outer , air comp kit , coil assy ignition , door latch front lh , brake shoe , brake pad , chain set , spark plug , piston ring set , gasket , bulb , projector lamp , clutch plate , cover assy , pilot bearing , clutch release bearing , air filter , oil filter , fuel filter , pressure pipe for hyd door , solenoid switch , adaptor pneumatic

CTN :45318510

15 Jun, 2026 NA

Amritsar - Punjab

Tender For supply of clutch disc 310dia , ignition coil , universal joint cross , assy fuel pre filter , timing belt , spring brake chamber , insulating cabin mtg , electro magnetic switch , assy rear door latch rh , assy sucion hose , door lock assy lh

CTN :45339077

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 :for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2: bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may becommunicated before prototype approval. note-3:annexure-improvements-vande bharat chair car coaches is applicable. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Door Latch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector