Latest door ring Tenders | Government door ring Tenders

Central Government/Public Sector

CTN :40151338

12 May, 2025 NA

Samastipur - Bihar

Tender For supply of aoh maintenance schedule of no- 32 changer consisting of 32 common item of make m /s- rever engineering pvt. ltd. (bt type) or m/s- anantashree (aal make %u2013ganz type) as per an nexure %u2013q1 and one set of hardware of 28 nos. common hardware of no-32 tap changer to be procured from repl (bt type) or aal ( ganz type0 only as per annexure- aoh-hw-1 [ warranty peri od: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40135878

05 May, 2025 NA

Margao - Goa

Tender For supply of hardware item - sealing tablet , 3mm thick watchman , 6 inch dia butterfly valve , 4 inch dia butterfly valve , g mi bucket , horizontal non return valve

Central Government/Public Sector

CTN :40122378

28 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of set of kit details for lwcb/pp manufcturing of seat and berth consisting of a. item-1,7,10,11 to drawing 981-6-1-002,col-i,alt-nil - 6 sets, b. item-1,6,8,12,13 to drawing 981-6-1-004,col-i,alt-nil # 6 sets, c. item-1,6,8,11,13,14 to drawing 981-6-1-006,col-i,alt-nil - 6 sets (item 1, 6, 11 to be supplied as an assembly), d. set of items and hardware -items 4 t o 32 except 24 to drwing 981-6-1-001, col-i,alt-b(item no-6 chain assembly shall be supplie d without upholstery) color scheme as per the letter no md/ss/lhb/103 ab, dated-09.10.2 024. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.p hp using key: 0725lvclped1812 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

Central Government / Public Sector

CTN :40106615

20 May, 2025 NA

Secunderabad - Telangana

Tender For supply of set of hardware items for bogie support frame of icf crashworthy coaches. 1) hexagon head bolt ? is: 1364 (part-1)/iso 4 014 - m30x110 - 8.8 to icf drawing no. gs7-0-5-701, item-33, alt.- b/nil, qty.- 01no./set. 2) hexagon nut ? is: 1364 (part-3)/iso 4032 - m3 0 - 8 to icf drawing no. gs7-0-5-701, item-34, alt.- b/nil, qty.- 01no./set. 3) washer 33 ? is: 6610 to icf drawing no. gs7-0-5-701, item-35 , alt.- b/nil, qty.- 02nos./set. 4) spring lock washer b30 ? is: 3063 to icf drawing no. gs7-0-5-701, item-36, alt.- b/nil, qty.- 01no./set. [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :40081256

06 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For hardware miscellaneous store item

CTN :40053145

23 Apr, 2025 5.00 Lacs

Nagaur - Rajasthan

Tender For supply of hardware item

CTN :40058462

28 Apr, 2025 NA

Bokaro - Jharkhand

Tender For supply of set of hardware for axle box, set consisting of 9 items in 438 nos. per set. sk etch no. els/aq/wag-9/sk no. 0001. (rev. 02).(size of item no.-9 i.e counter shunk screw is m16x15 ) [ warranty period: 72 months after the date of delivery ]

CTN :40034698

01 May, 2025 30.00 Lacs

Shajapur - Madhya Pradesh

Tender For hardware item supplying for agricultural/ forestry work in nagar palika parishad shajapur - hardware item supplying for agricultural/ forestry work in nagar palika parishad shajapur, tagari hevi (plastic), favda (tata), geti (tata), geti hendal hendal woden (tata), balti (iron), sabbal, darata heavy, khurpi, distember(utsav), lime powder dolomite (bold), oil pant (asian), keel all size, jali lohe ki, yellow soil, neel, gloves, mask, long boot, jacket, lime powder dolomite, hendal woden favda (tata), lagga jhadu (bans ki ), jhadu (simple), favdi (iron rod ki), panjar (lohe ka), rassi (moti size ki), hathodi (lohe ki), kulhadi, ghan (5 kg), street light pole a.b. type clamp complete, street light pole pcc type clamp complete, nut bold 2 inch, nut bold 2 inch, lower (xl,xxl), t-shirt (xl,xxl), helmet, air fresnar, hand wash, poucha, vayiper, hand travel, tishu pepar roll, corpet, hand driyer machin, kanch (darpan, senitaripad

Central Government/Public Sector

CTN :40040926

24 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of hardware items for fixing stainless steel air reservoir (150 ltrs). 1. hex. hd. sc rew m16 x 50 - 8.8 conforming to is specification is: 1364, part-2 2002 and to icf drawing no. icf/std-3- 5-066, item- 11, alt.-c qty.- 04 nos/set. 2. hex. nut m16 - 8 conforming to is specification is: 1364, part-3 2002 and to icf drawing no. icf/std-3-5-066, item-12, alt.-c qty.- 04 nos/set. 3. hex. thin nut m16 - 05 conforming to is specification is: 1364, part-4 2003 and to icf drawing no. icf/std-3-5-066, item-13, alt.- c qty.- 04 nos/set.. 4. plain washer 16 conforming to is specification is: 2016-67 tab.-2, type-a & is:19 77-96 fe 330 and to icf drawing no. icf/std-3-5-066, item-14, alt.-c qty.- 04 nos/set. make-tvs/dfl/unbr ako/tuff only [ warranty period: 30 months after the date of delivery ]

Door Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government / Public Sector

Co-operative

Central Government/Public Sector