Latest door shutter Tenders | Government door shutter Tenders

Central Government/Public Sector

CTN :45730555

17 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For electrical work in connection with provision of relay hut for gate signaling at non interlocked level crossing gates ( tvu between 10,000 and 20,000) over lucknow division .

Central Government/Public Sector

CTN :45733183

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as mg/bg carriage frames, coach battery box ,tension spring, seat frames of different sizes, berth frames, wheel stand, tie bar gate, ms gate, battery box, empty electrical box, ms window, ms window, hand trolley, hydraulic trolley, gi re mast, window grills, ms grills, ms stands, rolling shutters and partition frames of coaches , wheel stand, suspension rods , foot step, ms boxes, luggage rack, ms pipes, ms cylinder, cut parts of coaches, zinc sheet, transformer body, coach sheets, point machine cover, iron rods, trolley, ms wire, bolt & nut and other nmg coach cutting scrap items coming under ms items with/without ss, plastic, electrical and other nfs attachments on as is where is condition, available under the custody of cdms 08 ward ap. note: pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. note: cutting permitted up to loadable size only ( loc: bin no. 132 at scrap yard)

Central Government/Public Sector

CTN :45730780

20 Jul, 2026 NA

Kota - Rajasthan

Tender For kota division- provision and improvement of lighting, charging points, pre-cooling facility and related electrical works and interlocking of non- interlocked lc gate having tuv more than 20000 on kota division" (lc-06, lc-55 & lc-66 of kota-cor section.) and kota-cor section - provision of pump & related electrical work for water supply arrangement

Central Government/Public Sector

CTN :45719640

21 Jul, 2026 30.00 Lacs

Chakeri - Uttar Pradesh

Tender For repair/replacement galvalume sheets, ceiling and certain joinery related items in permanet and temporary bldgs of n-4, narendra ground and rama devi at afs chakeri , kanpur - taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed., ditto all as per item no.01 above but exceeding 1.5 sqm but not exceeding 4sqm each., dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed., framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde-e-165, s&f solid pvc door frame of size 50mmx 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube all as per specification and drawing., s&f factory made solid panel factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing, s&f pvc butt hinges medium weight, 100 mm long, complete all as specified and directed., s&f 150 mm size aluminum, anodised, barrel tower bolts of extruded section., s & f 125 mm long aluminum anodised bow handle fabricated type extruded section complete all as specified and directed., s&f 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 85 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 125 mm for double shutter door comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of k value 58-60 (s

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

Central Government/Public Sector

CTN :45140187

02 Jul, 2026 NA

Sultanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of flush door shutter size(2100x950x30mm) , flush door shutter size(2100x700x30mm)

Central Government / Public Sector

CTN :45730662

24 Jul, 2026 NA

Hyderabad - Telangana

Tender For hyderabad division: 1) replacement of panel interlocking both indoor and outdoor by electronic interlocking system at cvb station on hun/hdn routes- electrical arrangements 2) signaling arrangement in connection with interlocking of lc gate no:103 at km no.194/800-900 between gwd-pdo stations- electrical arrangements 3) signaling arrangement in connection with interlocking of lc gate no:231, 235 & 238 on stpd-mue stations - electrical arrangements

CTN :45735294

08 Jul, 2026 2.98 Crore

Pimpri - Maharashtra

Tender For repairs maintenance to vertical lift gate stop log gate hoist 80mt capacity and allied mechanical electrical works at ghatane barrage

CTN :45730525

20 Jul, 2026 NA

Kharagpur - West Bengal

Tender For electrical work regarding provision of at, where ips is available, at 4 nos. mid-section lc gate goomties in kharagpur division.(src jurisdiction)

CTN :45419346

01 Jul, 2026 NA

Purnia - Bihar

Tender For bid to ras bid to ras supply of safety items at purnea lpg plant c c - windsocks doublelinen clothwater proof , hand glove lowtemperature rbr 30 degr , handgloves pvc 18inyellow , cotton handgloves , goggles panoramic view chemicalsplash , goggle protective uv protection , gogglesud 50 antifog , goggles uee132wg arc welding , goggles gascutting , ear plugrbr , earmuff universalsoundlevel 135dba , safety shoes , safety toe guard , safetyhelmet hdpe , face shield and safetyhelmet , n95 mask reusable , barricadingtape 2mmx3in , trafficcone conical pu , safetybelt harness polyamide manufactur , blanket water gel , spark arrestorsize 6in , spark arrestorsize 3in , spark arrestorsize 2in , spark arrestorsize 4in , tester breathalcoholmodel 701d victory , hhmd , flp led withenclosure torchvolt 1 point 5v , co2 gas cartridgefor dcp 9 kg fireexti , co2 cartridge for75kg fireextinguisher , inspectionmirror steelsize 610 x 305mm , jet nozzle ss 63mm , universalmultipurposenozzle gunmetal s , vlv sol norgrensingle pilot 5 by 2 , quartz bulbss range 79degc 1 by2 in , nozzle sprinkler size 1 by 2indifferent t , supply of flp esdpush buttons , flp break glassunit , sply of pressureswitch 010 kg flp , sply of pressureswitch 010 kg nonflp , sply of pressureswitch 030 kg , relayvalve 81 point 521166079refueller , siren handoperatedrange 1 point 6km , electrical sirenmin 3 km kirag , sply of lock key , champion gasket , co2 fireextinguisher hosewith handle , dcp fireextinguisher hose , double headhydrant malehosing coupler , fire hydrant linestrainer 6 inch diawi , fire hydrant linestrainer 10 inchdia w , fire extinguisherlock pin , half inch fitting withnipple both side , dcp fireextinguisherpowder , handpump for hsdlifting , enamel paint redsea green lightblue , double endedopen wrench set8x9 to 30x3 , adjustablewrench 36x300 mm , cs ball valve size15 mm , pressure guagedia 100 mm 40 kgss , pressure guagedia 150 mm 30 kgss , pressure guagedia 150 mm 16 kgss , pressure guagedia 50 mm 42 kgss , pressure guagedia 50 mm 16 kgss g , pressure guagedia 100 mm 21 kg ss , pressure guagedia 50 mm 150 kgss , m s pipe size halfinch , m s pipe size 25 mm , ms elbow size halfinch , m s elbow size 25mm , ss float valvesize 50 mm withball , c s gate valve size25 mm , reducer size 25 x15 mm , d e open wrench non sparking 24x26 al br , d e ring wrench non sparking 21x23 al br , d e ring wrench non sparking 24x26 al br , safetyrespiratory face mask single ca , double endedopen wrench set24x27 ss , double ended ringwrench set 24x27ss , double endedopen wrench set14x15 ss , double ended ringwrench set 14x15ss , double endedopen wrench set18x19 ss , double ended ringwrench set 18x19ss , double endedopen wrench set20x22 ss , double ended ringwrench set 20x22ss , allen key set witht shaped holder chrom

Door Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector