Latest dosing pump scrap Tenders | Government dosing pump scrap Tenders

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

CTN :45317980

08 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of 11 point 7 hp engine and high head water pump as per ts , puf tank 500 ltrs as per ts , spares tools oblique kit for each engine as per ts , high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585 , tank connector , ball valves brass min 15mm , non return valve , pressure relief valve , by pass valve , suction stainer , 25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank , suction pipe 25 mm dia of length 3 and 4 mtr , hand operated rotary pump , hack saw blade of size 300 x 13 x 0 point 65 mm , closed grip heavy duty hand hack saw frame suitable for 300mm blades

CTN :45068617

03 Jun, 2026 1.52 Lacs

Guna - Madhya Pradesh

Tender For supply of handpump majour spare parts under ww np guna - supply spares and majour part for hand pumpl under ww np guna, ukbfv yoklj, ysnjoklj, kseoklj, jcjfjax, jcjokljcm, jcjokljnksv, vijokyovlsecyh, yksojokyovlsecyh, psdokyoxkbzmfjvsujlfgr, vijokyodaiyhv, iyatj ;ksxckm+, qkyksoj, lis kj, yksojuv c.i.reducer cup , jcj khvfjvsujczkl dh, czklyk;ujgsohm;wvh 350 ls 400 xzkeotuesa, eklvjqhl, ,e-,l- jkwmlkdsv, csfjax6204 ,u-ch-lh-,l-ds-,q, ,dly ,l-,l- , psufcfkdiyjvkbz-,e- iind, psuuvoksyv, hexagonal nut bolt, g.i. socket i.s.i. medium 32 mm, head cover, thrust plate of pedestra, supply of hand pump set india mark iind isi complete with c.i.cylinder and 10 nos m.s. roads, m.s. road 12mmdia x 3mtr long fully galvinised, pedestral only h/d, water chamber only h/d, head assembly complete with handle and chain bearing, c.i.cylinder assembly with master piece, brass cylinder h/d, handle only h/d, handle only heavy duty long

CTN :44755531

23 May, 2026 NA

Kargil - Jammu And Kashmir

Tender For bid to ras bid to ras supply of 11 point 7 hp engine and high head water pump as per ts , spares tools oblique kit for each engine as per ts , high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585 , tank connector , ball valves brass min 15mm , non return valve , pressure relief valve , by pass valve , suction stainer , 25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank , suction pipe 25 mm dia of length 3 and 4 mtr , hack saw blade of size 300 x 13 x 0 point 65 mm , closed grip heavy duty hand hack saw frame suitable for 300mm blades

CTN :44699131

23 May, 2026 NA

Kargil - Jammu And Kashmir

Tender For bid to ras supply of 11 point 7 hp engine and high head water pump as per ts , spares tools oblique kit for each engine as per ts , high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585 , tank connector , ball valves brass min 15mm , non return valve , pressure relief valve , by pass valve , suction stainer , 25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank , suction pipe 25 mm dia of length 3 and 4 mtr , hand operated rotary pump , hack saw blade of size 300 x 13 x 0 point 65 mm , closed grip heavy duty hand hack saw frame suitable for 300mm blades

CTN :45261112

10 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of ac and ref plant spares c c - door mount microcontroller , vibration eliminator 7 8 ods , tube cutter , flaring tool kit , hand held refrigerant leak detector , solenoid valve body danfoss evra15 , solenoid valve evra-15 with 220 v ac coil danfoss , under voltage relay 3 ph minilec vct-d2 , analogyl input card for plc , ring gasket-shut-off valve part no. 05097 , sight glass part no. 06001 avail.as com.as.kit item 209 , rear bearing flange part no.03651 item 221 , valve plate assembly part no. 08498 , set piston-conn.rod w.3 rings part no. 08491 , set sight glass part no. 08130 , set connecting rod part no. 08435 , set front bearing part no. 08179 , set rear bearing part no. 08465 , set oil pump part no. 08795 , set oil filter not shown part no. 08457 , set of gaskets for condenser for 4 tr ref plant for nopv , three way valve 1 4 , core for filter driev , refrigerant suction filter , set shaft seal part no.08444 , set crankshaft part no. 08445 , set gaskets part no. 08492 , double.sl.oil cont.ring 80 part no. 06369 , lower valve plate gasket part no. 06578 , upper valve plate gasket part no. 06486 , core for filter drier

CTN :44728383

25 May, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of main switch board spares c c - switch 4-port , gyro pump , power contactor mnx 70 , indicating lamp-colour: yellow,input , voltage: 240v ac 50hz, , indicating lamp, colour: green, input , voltage: 240v ac, 50hz,le , indicating lamp,colour: green, input , voltage: 24 v dc,led typ , 1000w.remotly operated search light , with control panel , mccb 20a , mccb 32a-nom 32a 1auxcont+1trip alm , therm 25,6-32a magne288a , mccb dn0-63a , mccb dn0-100a , power contactor mnx9/32 , power contactor mnx 45 , mccb 250a tp with 1 aux. with shunt trip , hand change over switch (hcos) , vme ip carrier , 50 pin pcb-ai , flash memory card 2 mb , connector for rtd card , connector for ai card , vme processor , 24*30 mm yellow indicator , 24*30 mm red indicator , 24*30 mm green-momentary 2 c/o pb , 24*30 mm red-momentary 1 c/o pb , 24*30 mm red-momentary 2 c/o pb , 24 30 mm blue-momentary 1 c/o-pb , 24*30 mm white-momentary 1 c/o pb , trackball , interposing relay, 2 c/o 24 vd , terminals for plc cards , ms 10 horizontal float level switch , intercom system (pcb assembly for , pan 5701) , micphone(stowage hook, preamplifier 7 , pin(pan1424-00&pan6702) , intercom system (line interface , module)-pas30670 , 63a, 3pole, mcb , 2x18w fluorescent tube light , mast head light (white) , stern light(white) , all round light(white) , all round light(red) , power supply unit(132 084ng003) , nsiu-nmea(na06 201109) , power unit 24vdc (nb05 307) , internal communication system(pre amplifier pcb imcos 8210) , motorised potentiomed er(frequency) , led lamp(red)12v dc , 2a, 1 way mcb 2p , serial to usb converter for touch screen , rectifier unit , end cover for sttb 2.5 , proximity switch 0-150 rpm , optical smoke detector head sv.ip44d (conduit box) , gyro connection pcb , gyro sensor pcb , gyro outer sphere pcb , mk2-modulator pcb , spare parts x/s-mtr down , local control pcb , mk2-power i/o pcb , sub-miniature fuse 1a 250 v , cia cont to i/f pcb , fan, complete assembly , encoder 2048, pulse per revolution , spare parts x-ped up , relay 12v dc , motor control module , trackball 50mm nsc , insc-isw-controller , convertor ac 85-264v/dc 24v , sailor ip handset & cradle , em log fd card , miniature cirucit breaker 20 amps , mcb 3 pole 50a , hrc fuse, fuse link (2a) , hf fuse link 4a , hf fuse link 4a , 22.5mmdia.240v ac,green, ledlamp, teknic , mccb-25a , acb spare aux. contact (6no+6nc) , mccb dth800 inst 360-640a , mccb, 3p, dl-100, 40a , voltage relay(t3300-02) , synchroscope , ammeter, aε, 0-400a , tp mcb,240v ac, 50hz, 4a , terminal cts 2.5un , terminal cts 6u , power terminals-suitable up to 6 sq.mm wire , o/c &s/c relay (t2500-06) , terminal cts 10u , double frequency meter -415vac range45-50-55hz size 96 x96 , quint-power supply unit , wtrd1 thermistor relay , power terminals-suitable up to 70 sq.mm wire , synchronoscope-input415vac size:96x96 with gasket , mcb 10a tp , mcb 16a tp , mcb 25a 3 pole , mcb 40a tp , mcb 63a tp , hcos 50a (with out enclosure) , dn2-mm 240v ac electrically operated mechanism direct drive , motor protection relay, microprocessor based , indicating lamp-colour: blue, input , voltage: 240v ac, 50hz,le , 6a,1 way mcb, 2p , ais gps anteννα ατ575-68(2gdb,tnc-f) , hrc fuse, fuse link (4a) , hrc fuse, fuse link (6a) , hrc fuse base & carrier 2a/6a , red push button , governor control switch , control terminals , illuminated pb,red , illuminated pb.green , control terminals cst 2.5 , relay mno 240vac 4 no conatcts , relay 240 v ac mno realyn 3no+1nc contact , relay mno 415vac, 4nc contact , sart , motorised mechanism for 400/630

Central Government/Public Sector

CTN :44283684

21 May, 2026 NA

Goa - Goa

Tender For bid to ras corrigendum : supply of helo re fueling pressure nozzle , helo re fueling gravity nozzle , helo re fueling hose end adaptor , helo de fueiling tube , helo fueling hose , hose reel , grounding cable reel with cable , hand pump avcat defueling , hand pump avcat stripping , first submission of binding drawing , document hard copy , document soft copy , service of service engineer , preservatives and depreservatives , commissioning spares , onboard spares , standard and special tools , another items as per oem as per sotr

CTN :45221183

30 May, 2026 40

Bengaluru - Karnataka

Tender For procurement of cleaning materials for k gollahalli gp for the year 2026-27 - sanitizer, safety helmets, bleaching powder 33% chlorine, malathion dust 5.0%e.c, alum crystal, white scented phenyl, black phenyl, fogging chemical (with fuel mix), pesticide (fogging chemical with water mix), malathion oil 5.0% e.c, toilet cleaning acid, soft broom, coco broom, pvc hand gloves 16 inches, gum boots branded, mask branded, weed control chemical, sodium hypo chloride, apron, clip mop set it use moping purpose to office only, mop small cloth to use office table and chairs cleaning purpose only, bamboo ladder, toilet cake or odonil fragrance of wash room purpose only, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, ammonium salt of glyphosate 71 % sg powder, system herbicide glyphosate 41% sl, plastic bucket, water jug normal size, plastic dust pan, metal dust pan, small web stick 8 feet, metal type big web stick16 to 24 feet length, garbage cover small size, coco broom with 5 feet length only natural product to sweep the outdoor only

CTN :45217957

30 May, 2026 40

Yelahanka - Karnataka

Tender For procurement of cleaning materials for shivakote gp for the year 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

Dosing Pump Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector