Latest dosing pump scrap Tenders | Government dosing pump scrap Tenders

Central Government/Public Sector

CTN :40969733

09 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of fahp water pumps complete assy for ntpc rihand

CTN :40966744

15 Jul, 2025 5.13 Lacs

Raichur - Karnataka

Tender For supply and fixing of capacitor bank and auxiliary relays at water treatment plants, intermidiate pumps house in raichur city corporation limits.

CTN :40966032

21 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of diffuser for cooling water pumps of unit iv & v note:1. prospective bidders may get the specification free of cost by downloading from websites.tnpgcl : www.tangedco.gov.innic : https://tntenders.gov.in/nicgep/apptn govt. : http://www.tender.tn.gov.intender opening (electronically):o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/mm/ttps)

corporations/Associations/Others

CTN :40972834

22 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For rotating assembly for sea water booster pumps

corporations/Associations/Others

CTN :40972897

22 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For pipe bottom support for cooling water pumps

State Government

CTN :40970206

22 Jul, 2025 15.03 Lacs

Shipaijala - Tripura

Tender For uws schms undr gomati dist/1.3 mgd surface water treatment plant at banduar, udaipur / sh- repairing of v.t pumps under dws sd-i, udaipur during the year 2025-2026.

CTN :40955657

19 Jul, 2025 90.5 Thousand

Multi City - Karnataka

Tender For procurement and supply of spare parts required for maintenance of drinking water and purchase of new motor pumps and panel boards for doddagatta grama panchayath for the year 2025-26 - g i pipe 1.25 inch(gp dw), flanz set(gp dw), no volt coil(gp dw), hand pump telescopic stand(gp dw), hand pump m10 boltnut(gp dw), hand pump lower valve(gp dw), hand pumpchain coupling(gp dw), hand pump connecting rod(gp dw), axle pin for hand pump(gp dw), hand cylinder bassem pump(gp dw), gi nipple(gp dw), ready collor(gp dw), nrv pandey(gp dw), g i bend 25 mm(gp dw), upvc pipe 3/4(gp dw), pvc reduce collor 2 inches(gp dw), pvc service handle 2.75 inches(gp dw), relay(gp dw), cable(gp dw), amps pause 63(gp dw), g i nipples 2 inch(gp dw), pvc collor 2.5 inch(gp dw), pvc collor 2 inch(gp dw), pvc collor 1 inch(gp dw), pvc bend 2.5 inch(gp dw), pvc bend 2 inch(gp dw), pvc bend 1 inch(gp dw), ams meter(gp dw), preventer(gp dw), auto starter(gp dw), upvc mta(gp dw), upvc fta(gp dw), upvc elbow 3/4(gp dw), upvc bend 3/4(gp dw), upvc collor 3/4(gp dw), upvc gums(gp dw), steel water taps(gp dw), motor pump 7.5 hp 14 stage starters(gp dw), pvc gum(gp dw), pvc reduced collor 2.5 inch(gp dw), g i collor elbow bend 2 inch(gp dw), g i pipe 2 inch(gp dw), motor pump 7.5 hp 10 stage(gp dw), elbow 3 inch(gp dw), elbow 2.5 inch(gp dw), elbow 2 inch(gp dw), elbow 1 inch(gp dw), pvc valve 3 inch(gp dw), pvc valve 2.5 inch(gp dw), pvc valve 2 inch(gp dw), pvc valve 1.5 inch(gp dw), pvc valve 1 inch(gp dw), pvc pipe 3 inch(gp dw), pvc pipe 2.5 inch(gp dw), pvc pipe 2 inch(gp dw), pvc pipe 1.5 inch(gp dw), pvc pipe 1 inch(gp dw)

CTN :40955672

11 Jul, 2025 33

Multi City - Karnataka

Tender For purchase of motor pumps and other materials for drinking water borewells in diddige gram panchayat limits

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130