Latest dot peen marker Tenders | Government dot peen marker Tenders

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

Central Government/Public Sector

CTN :45090826

26 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of neutral inserts for under floor pit wheel lathe widia / kennametal tools / sandvik asia / indicarb/ ceratizit make only, similar to widia tools specification no.lnux 191940db-tn 2000 (or) kennametal tools specification / catalogue no.lnux 191940 rrh - kc9110 [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45275177

04 Jun, 2026 NA

Vadodara - Gujarat

Tender For tools for cnc lathe machine

Central Government/Public Sector

CTN :45235162

26 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap condemn ferrous mixed melting consisting of and released from, switch blcp, zpt, bldj, blho, ztel, zban, zfwa, zlfr, zlda, zlc, zli, zprd, blpr, hog coupler, fl dom, marker light, dial gauge,diffrent type of measuring tools, electrical and machanical tools, bench type, accesories of dga, analytical balance, yoke, amonia printing machine, table, pinion, lifting tackle assly, magger, steel channel, lipid racer, plain racer, axle box crown and rear cover, lock plate, abutment ring, housing for traction bar, battery stand, set of lybrinth, end frame, holder plate, bello plate, nut, washer, speed prove housing cover, gear, set of hardware, racer, set of safety sealing, bench vice, set of bolt, longi set, brake shoe key, fly catcher fittings, lt distribution panel board, starter, mdb box, tube light assly, lt panel, diffrent typr of stand, box, top, etc, solar geasure sheet, exhaust frame, sign board frame, dg filter silencer, a9, sa9, c2 relay valve, c2w valve, air drayer valve, nut bolt, pbu/tbu unit, pentopen strip, main spring, longitude tube, upper articulation assly, push rode, study link, study tube, arm assly, pento base frame, servomotor, hardware and compresure crankshaft, free end cover, ply and cover cylinder, intercooler, head, base frame, coupling filter, disk valve, ms pipe, crake end shield, bearing, release ferrous items during overhauling, loco filter jali, drums, iron sheet, rdpt kits, small box racks and structure, packing cage cab fan coverage jali, dust cover, oil filtration plant release item, oil machine release item, heater coil heater element, test bench, pit wheel lathe machine release items, fuse oil seal, filter contactors switch, lamp pipe, roller filter, disc, gaskets, main drive roller shaft, light junk box cover, loco coridor cover, water protection cover, ms angle, wire rope, slings bracket fan and air circulation fan jali and blades, spm, iron spring, ms washer, screw, liner, car body filters, ms thin sheets, ms spring, cutter pin channel, shutter, hose pipe wires, ms angle, structures, blower fan jali, filters, window shutter, flasher light, dome cooler body without motor & pump, diffrent type of resistance, grid panto strip, diffrent type of ferrous release from charger, regulator, cvt, repeater frame, steel rack, ups, transformer, sensor gear, bearing cover, locking plate, special rig, distance piece bearing, middle wheel lock plate, thrower, lock plate, loose rip, racer distance piece, spring seat liner, push pull rod, spheriblock, damper, cattle guard, cbc coupler body, yoke, buffer, screw coupling, draft gear, nuckle, clevis, yoke pin, nuckle pin, clevis pin, hand brake, bello plate, brake shoe key, cbc spare parts, operating handle, ferrous released from master controller, c145 contactor, em-contactor, c118 contactor, program switch, etc.

corporations/Associations/Others

CTN :45168289

22 May, 2026 NA

Mysore - Karnataka

Tender For auction sale of ms scrap,scrap of c.i boring m.s. turning and boring mixed,scrap of c.i boring/m.s. turning and boring mixed with mud,m.s.melting scrap,ms iron baleputty scrap,scrap of rubber,scrap of used unserviceable cast iron galvanised iron or ms pipes,m.s.scrap of miscellaneous items,scrap of used welding coil spools,scrap of condmened damaged/rejected nh cnc lathe,scrap of unserviceable battery operated platform truck-3 wheeler,ms scrap,scrap of used unserviceable diesel forklift-5ton,scrap of condmened portable air compressor elgi make,scrap of condmened cp compressor,scrap of condmened lancer boss,scrap of electrical items,scrap of condemned cutting tools hand tools,electronic waste,scrap of condemned bearings,scrap of used condemned lead-acid batteries and dry batteries,scrap of condemned production equipment parts made of alluminium,scrap of condemned ms hydraullic tube structures,scrap of condemned seamless ms tubes,ms scrap of obsolete wheel rims,ms scrap of condemned damaged un-serviceable field returned items,scrap of used condemned non-reusable welding cables,scrap of miscellanious items of various metal and metal alloys,scrap of condemned damaged tungsten carbide inserts,ms scrap of condemned used rejected jigs and fixtures,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

Central Government/Public Sector

CTN :45102094

05 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of neutral inserts for under floor pit wheel lathe, widia / kennametal tools /sandvik asia / indicarb make only, similar to widia tools specification no.lnux 191940db-tn 2000 (or) kennametal tools specification / catalogue no.lnux 191940 rrh - kc9110. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45121100

01 Jun, 2026 NA

Mumbai - Maharashtra

Tender For turning insert for axle turning lathe, iso designation tnmg 220412, iso p25-p40. grade: pf-4315 of sandvik coromant or tn4000 of widia, tp2501 of seco tools, ic8250 of iscar, tt9080 of taegutec. supply shall be from oems or their authorized distributors only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43369763

07 May, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of supply of tools and accessories for lathe drilling machine and tool room precision work d d - h7 - as per sl.no.32 of technical specifcation , hss machinereamer-8 h7- as per sl.no.33 of technical specifcation , hss machinereamer-10 h7 - as per sl.no.34 of technical specifcation , hss machine reamer-12 h7 - as per sl.no.35 of technical specifcation , hss machine reamer-15 h7 - as per sl.no.36 of technical specifcation , hack saw frame- as per sl.no.37 of technical specifcation , hack saw blade - as per sl.no.38 of technical specifcation , ball pin hammer - as per sl.no.39 of technical specifcation , rubber hammer - 2inch- as per sl.no.40 of technical specifcation , combination spanner set - as per sl.no.41 of technical specifcation , lathe dog-bent type -as per sl.no.42 of technical specifcation , lathe dog-bent type -as per sl.no.43 of technical specifcation , lathe dog-bent type - as per sl.no.44 of technical specifcation , lathe dog-bent type - as per sl.no.45 of technical specifcation , bench vice -200mm -as per sl.no.46 of technical specifcation , bench vice -200mm -as per sl.no.47 of technical specifcation , wheel dresser - as per sl.no.48 of technical specifcation , plain combined drill - as per sl.no.49 of technical specifcation , plain combined drill - as per sl.no.50 of technical specifcation , plain combined drill - as per sl.no.51 of technical specifcation , ratchet type wrenches - as per sl.no.52 of technical specifcation , letter punch - as per sl.no.53 of technical specifcation , number punch - as per sl.no.54 of technical specifcation , parting tool - as per sl.no.55 of technical specifcation , parting tool inserts - as per sl.no.55a of technical specifcation , clamp screw - as per sl.no.55b of technical specifcation , wrench - as per sl.no.55c of technical specifcation , parting tool - as per sl.no.56 of technical specifcation , parting tool inserts - as per sl.no.56a of technical specifcation , wrench torx - as per sl.no.56b of technical specifcation , clamp screw - as per sl.no.56c of technical specifcation , parting tool holder- - as per sl.no.57 of technical specifcation , parting blade - as per sl.no.57a of technical specifcation , parting inserts - as per sl.no.57b of technical specifcation , parting tool holder - as per sl.no.58 of technical specifcation , parting blade - as per sl.no.58a of technical specifcation , parting insert - as per sl.no.58b of technical specifcation , screws - as per sl.no.58c of technical specifcation , allen key _spares as per sl.no.58d of technical specifcation , boring bar - as per sl.no.59 of technical specifcation , insert screws - as per sl.no.59a of technical specifcation , boring bar - as per sl.no.60 of technical specifcation , insert screws -as per sl.no.60a of technical specifcation , boring bar - as per sl.no.61 of technical specifcation , inserts for the boring bars - as per sl.no.61a of technical specifcation , insert screw- as per sl.no.61b of technical specifcation , boring bar - as per sl.no.62 of technical specifcation , insert screw- as per sl.no.62a of technical specifcation , boring bar - as per sl.no.63 of technical specifcation , inserts for boring bars - as per sl.no.63a of technical specifcation , insert screw - as per sl.no.63b of technical specifcation , boring bar - as per sl.no.64 of technical specifcation , inserts for boring tool - as per sl.no.64a of technical specifcation , insert screw- as per sl.no.64b of technical specifcation , torx-wrench - as per sl.no.64c of technical specifcation , boring bar - as per sl.no.65 of technical specifcation , inserts for boring bar- as per sl.no.65a of technical specifcation , shim _spares - as per sl.no.65b of technical specifcation , shim pin _spares - as per sl.no.65c of technical specifcation , lever _spares - as per sl.no.65d of technical specifcation , clamp screws _spares - as per //bid details 2 / 124 sl.no.65e of technical specifcation , turning tool - as per sl.no.

Central Government / Public Sector

CTN :45054924

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and first aid box for any emergency. 9. delivery by actual weighment basis only.

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Dot Peen Marker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors