Latest dowel bar Tenders | Government dowel bar Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45688894

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of supply of precleaner for air cleaner , connection , o ring for moatti lub oil filter , injector nozzle assembly , zinc rod , 1/8 bsp drain cock , plate covering , valve grinding paste (901702) , joint , lub.oil pressure sensor with switch , set bolt - m12x1.75x50 - 8.8 , set bolt-m16x2x50 - 8.8 , set screw m10x1.5x35-8.8 , stud , socket head grub screw - m10x10 , slotted c sunk head screw -m6x , circlip , banjo bolt-m14x1.5 , washer spring , clip jubilee for strainer , connection piece to turbocharger , flexible hose , temp.indicator 0 50 degc. , glass fuse 300ma size 5x20 fast blow , set of 10 , fuse 1a , iso1 electrodistributor , 24vdc , solenoid return , fuse 2a , fuse 6a , se card , m.e bearings scanner exhaust gas temp , on release safety card rgm card , logic unit and , programmable output(0-20) , indicating lamp-red , with lens , holder and lamp , indicating lamp-white with lens , holder and lamp , fuse cartridge 4a(am)10x38 , watershed connection , plunger barrel assembly (dia 25 mod) , o ring 4 x22.5 perbunan , o ring , o ring (for liner collar) , temp.switch(model ti-250-s)95deg 10m capilla , pressure transmitter , pr. transmitter 0-10 bar , gfl bolts , low lub oil sump level switch , set bolt -m20x2.5x120-8.8 , set scrw -m20x2.5x40-8.8 , stud m12x1.75x45-8.8 , self locking nut , allen screw , screw , socket head cap screw-m12x25-12.9 , socket head cap screw -12x40-12.9 , socket head cap screw-m12x55-12.9 , circlip , circlip external -60mm , banjo bolt - m22x1.5 , washer copper , copper washer , copper washer(33x39) , mech dir pin , spring dowel pin , spring dowel , lock washer pair , plain bearing with bearing bush , thrust ring , locating ring , ring nut , intermediate ring , sealing disc , contact no , pressure gauge 0-4bar dial 4 bourden ss3 , analog indicator 72x72.0-4bar i p4-20m , pressure transmitter , range 0-6bar , pressure switch , set at2.0b , pf-3p4-w-bb-1x00-21b-10b-db-n-v.t , solenoid valve nc 24vdc(y94 , y97 , y142.y143 , y) , high signal selector (or module) , solenoid valve no.24 vdc (y198) , safety stop , pressure guage with glycerine , i/p-0-10 bar , pressure transmitter 0-4 bar 24vdc o/p-4-20 ma , pressure transmitter 10 bar 24vdc o/p-4-20 ma , pressure guage with glycerine , i/p-0-6 bar , selector plate (opening 1 , 3 , 5) , pressure transmitter 6 bar 24vdc o/p-4-20 ma , pneumatic distributor (7/1 , 7/2 , 7/3) fuel rack , pressure transmitter 40 bar 24v dc , pneumatic distributor (8/1 , 8/2 , 8/3 , 8/4) stop , pressure regulator (5) , on/off switch , 2 pole , off delay timer 0.2-300sec.+socket , converter module(t452 , t458)charging airtemp.f.w.temp.(0-100) , supply card , ae 24/24 , sleeve nt-hh-pn10-dn100 , damper key , spring pack(new) , o ring 8.2x680.6 (nitrile) , o ring , o ring , bush(32307) , bush(32301) , signal isolator 4-20 ma/4-20ma loop powered , bearing temp measure card (mtp card) , bearing temp alarm card (aip card) , regr. safeties temp. card (rsp card) , on release safety icm1 card , frequency divider for governor speed sensor , a.b.b t/c magnetic speed sen , solenoid valve cnomo dia-1.6 , 24 vdc , regulator for fw temp. , 24vdc , i/p-rtd , o/p-4-20 ma , green head for push button , blue head for push button , on delay relay 24v dc , threshold module , rgm card , frequency divider-turbo speed , cable (engine speed measure) , pneumatic switch for local/remote operation , selector plate (solid) , selector seal , sub base seal , pilot push in type , fresh water air cooler inlet connection , fresh water pre heating inlet connection , fuel rack indicator , pressure gauge 0-6 bars , pr. switch 1.2bar min. , pr. switch , 4140-c-k-1-e-22-aa0 , 4.1b , pr switch type 4140c-19 bar , pressure transmitter p5r-6bar-4-20-1/2-pe , pressure transmitter p5r 0-40 bar , mss module 0-150 deg(convertor) , temp switch tcm96p 40deg c decreasing , temp switch tcm96r 90deg c increasing , temp switch tcm96r 95deg c increasing , pressure transducer 0-10 bars , mss module 0-100deg.c 4-20 temp con

CTN :45624706

13 Jul, 2026 NA

Baitul - Madhya Pradesh

Tender For raw materials office stationary - package 1 hardware items, m.s.round bar 65 mm, m.s.round bar 55mm, m.s.round bar 45 mm, m.s.round bar 40mm, m.s.round bar 35 mm, hss tool bit 1/2 x6 inch, hss tool bit 3/8x6 inch, hss tool bit 1/4x6 inch, power saw blade, hacksaw blade (miranda), cotton waste, oil 90 num, oil 40 number, cutting oil, emery cloth 200 grit, grease, diesel filter, oil filter, air filter, power steering oil, emery paper 36 grit, sulphuric acid (h2so4), soldering paste, ms flat 50x10 mm, ms flat 50x5mm, ms flat 65x10 mm, ms flat 70x10 mm, ms flat 75x10 mm, ms flat 100x10 mm, ms flat 50x12 mm, hexa blade (pack of 100), round bar 10mm ms,, gi sheet 0.5 mm, dowel pin, emery paper 80 grit, counter sunk head screw, round head slotted screw, drill bit 3mm, drill bit 4mm, drill bit 6mm, drill bit 8mm, drill bit 10 mm, drill bit 12 mm, punch, pan head revit, ms angle 25x25x3 mm, ms angle 40x40x5 mm, ms strip 20x2 mm, ms pipe 50x3 mm, copper pipe 1/2 inch, welding electrode 2.5 e6013, welding electrode 3.15 e6013, welding electrode 4mm e6013, oil paint, soft wood 4x4x5, soft wood 3x3x5, soft wood 2x1x5, soft wood 1x1x5, fevicol, nails 1, nails 2, nails 3, screw1, screw 2, screw 3, oil stone, wood polis titli, touch wood, plywood 8mm (4feet x6feet), plywood 12mm (4feet x6feet), plywood 18mm (4feet x6feet), emary pepar 80 no, emary pepar 100 no, emary pepar 120 no, grinding disk, grinding disk, cotton tape, pili mitti powder, wooden putty, polyfix wood sealer, paint, distilled water, oil paper sheet, steel wire brush, multipurpose cleaning brush, brush, cleaning solvent, benton grease, battery clamp, hydrolic fluid, package 2 electrical, battery, soldering iron, soldering wire, soldering flux, resistance 1 ohms, resistance 10 ohms, resistance 1k ohms, resistance 10 k ohms, resistance 100k ohms, inductor 4.7uh, inductor 10uh, inductor 5uh, inductor 6uh, inductor 8uh, inductor 330uh, capacitor 3f, capacitor 3.3f, capacitor 5f, capacitor 6f, capacitor 5uf, capacitor 6uf, capacitor 8uf, leds 2v, leds 2v, leds 2v, leds 2v, leds 2v, push buttons, ic 741, ic 555,, mcb,ic7806, mcb, ic7905, switch two way, 5 pin shocket wall mounting type, wall mount batten-holder, bakelite angular-holder, fan regulator mounting type, hrc fuse -, 12 mm no.5 wood screws, 20 mm no.6 wood screws, 25 mm no.6 wood screws, neon lamp switch bord, machine screw, saddles, tube light choke, tube light rod, tube light holder plain, h.p.mv lamp holder suitable for, h.p.mv lamp choke -, capacitor, lead acid battery, pvc copper wire 1mm (90meter), pvc copper wire 1.5 mm (90meter), pvc copper wire 2.5mm (90meter), crimping spade 6a, crimping spade 16a, mccb, elcb, rccb, helogen lamp incandescent lamp, high pressure mercury vapor lamp, l.p.m.v lamp, high pressure sodium lamp, low- pressure sodium lamp led, helmat electrician yellow color, screw driver kit set, toggle switch,, resistors, carbon composition 62k , 1/4 w, 5%, resistors, carbon composition 33k 1/4 w, 5%, resistors, carbon composition 22k 1/4 w, 5%, resistors, carbon composition 220 1/2 w, 5%, resistors, carbon composition 330 1/2 w, 5%, resistors, carbon composition 470 1/2 w, 5%, resistor 10 ohms 5w, resistor 1k ohms 2w, resistor 330k ohms 2w, resistor 2 ohms 5 w, resistor 50 ohms 5w, potentiometer 500 ohms, 0.5a, potentrometer 100 k ohm, resistor 22 ohms 1 w, pvc saddles, led, intermediate switch, tap roll electrician, diode in4007, step-down transformer, variable resistor, dry cell, zener diode,, buzzer, conduit pipe metal iron, bare copper wire, multistrand cable 14/0.2 mm (90meter), multistrand cable 23/0.2 mm (90meter), multistrand cable 48/0.2 mm (90meter), incandascent lamp, pvc cable 3 core, pvc single stranded copper cable 1/1.4 ,1.5 mm, pvc single strand aluminium cable 1/1.8 , 2.5 sq mm, cotton tap, binding steel gi wire, lead and tin alloy, impregnated cotton tap, bitumen compound, lug board, double pole switch, lamp holder bayonet cap batten, barrater resistor, 4 way terminal pad, miniature l

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

State Government

CTN :45589456

25 Jun, 2026 NA

Giridh - Jharkhand

Tender For quotation rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well graded granular base

CTN :45596489

24 Jun, 2026 NA

Pulwama - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for panchayat halqa aripal - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black

CTN :45596491

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block wailoo - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or b

CTN :45596492

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block narvaw - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or b

CTN :45596493

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block rafiabad. ( except panchayat halqa behrampora a, hib-dangerpora, rawoocha, yarbugh). - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished

CTN :45596494

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block chandilwanigam - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finis

Dowel Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government