Latest dowel work Tenders | Government dowel work Tenders

Central Government/Public Sector

CTN :44874536

27 May, 2026 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of ho/hq/h' size wireline drill rods 3.0 m length right hand thread

Central Government / Public Sector

CTN :45302372

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - brass lump scrap - 98200045(15) cond.& u/s brass lump scrap consisting of flow lamp, oxygen regulators, 63a 5 pin plug components, spcc panel components, catenary ending cones, catenary splices, bushes, bolts, nuts, gas cutting torches, gm valves, float valves, tap bib cock, cp angle valves, dropper clips, contact wire swivel clips, marut hand compression sprayer, brush holders, terminal connectors, pg clamps, bracket direct clamps, steel wire ending cones, briddle wire dopper clips, rods, key spindle, nozzle type, dv components, trunnion body for bmbc, etc. available in the bin with or without other attachments. total gross weight: 865.6 kgs. said to contain total brass content: 845.501 kgs approx., total ms content: 5.65 kgs approx, total aluminium content: 5.194 kgs approx, total stainless-steel content: 3.14 kgs approx, and plastic, rubber, etc: 6.115 kgs approx. hsn code:74040022; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained.5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous ward bin no: 1.

Central Government/Public Sector

CTN :45147485

29 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : tender for supply of welding consumables - welding hand shield armour , , welding wire brush , welding wire brush (stainless steel v grove) , air pipe (100 meters) , gas cutting googles , 11 din black glass , white glass for welding screen , spark lighter , spark lighter stone , spirit level (0.5mm accuracy with magnet) size 30cm , tin cutter - 12 (300mm) , try square engineer esquare 12 inch , tungsten rods 2% thoriated tungsten (red tip) , polyester slings 25mm x 6 meter 1 ton capacity , polyester slings 50mm x 6 meter 3 ton capacity , drum chain 2.5 meter long , capacity 1 ton , chain with o ring and 3 leg , 2.5 m long , capacity 1 ton , octoganal chisel 200mm long x 22mm cutting edge , welding hand gloves , size 18 , spanners , adjustable spanner 300mm 12 , steel rule (set) , measuring tape (set) , allen keys ( six nos set) 4mm to 14mm

corporations/Associations/Others

CTN :45295324

12 Jun, 2026 10.00 Lacs

Deesa - Gujarat

Tender For supply of cleaning equipment at deesa nagarpalika - first/broom approximately 600 to 700 gram, v type shovel, square m.s shovel, square galvanized shovel, v type shovel with long iron rods, a broom with a raised handle with stick, toothed, trikam, plastic brush with raised handle 3 feet with iron clamp handle, mask(cotton), acid, white phinyle, m.s wire brush with raised handle, pink tablet, gumboot, reflect apron with deesa nagarpalika printed, galvanized supadi, spade, handle of shovel, toothed, spade, trikam, proper shoes, sweater with best quality (male/female), sanitizer 100 ml., sanitizer 200 ml., dettol soap 100 gram, paper napkin, dettol antiseptic liquid 500 ml., dettol hand wash 500 ml., plastic handles of shovels, toothed etc, trikam plastic handles, toothpicks, hand gloves heavy long, stick long 5 foot, rope, scented phenyl, galvanized bucket 10 liter, senetary paid, pvc tagara 16 inch, pvc tagara 18 inch, galvanized tagara 16 inch, galvanized tagara 18 inch, vasi with iron hand, vasi with stick hand, nifa indonesian broom approximately 600 to 700 gram, rain coat with best quality for female, rain coat with best quality for male, broad axe with handle, axe with handle 2.0 k.g, ghan with handle 3.0 k.g, ghan with handle 4.0 k.g

CTN :45319973

04 Jun, 2026 NA

Kutch - Gujarat

Tender For supply of bib tap pvc make prayag seiko kingston , led tube light 20w 4 feet havells bajaj surya , led tube light 10w 2 feet havells bajaj surya , led bulb 8w havells bajaj surya , wiremesh cloth 0.56mm , ceiling fan 1200mm sweep , mcb db sheet metal enclosure 8 way make philips crompton greaves havells , mcb spn 40 amps make philips crompton greaves havells , mcb sp 05 to 30 amps make philips crompton greaves havells , switch 5 amps one way flush button piano make anchor havells finolex , switch socket combination modular type 15 amps 6 pin make anchor havells finolex , switch socket combination 5 amps pin pvc box mounted make anchor havells finolex , ceiling rose , pvc square box 3x3 inch , pvc copper cable insulated multi strands 1.5 sq mm make anchor havells finolex , pvc copper cable insulated multi strands 2.5 sq mm make anchor havells finolex , pvc copper cable insulated multi strands 1.00 sq mm make anchor havells finolex , rectangular hollow steel column section of size 66 x 33 x 2.90 mm , pvc flexible waste pipe of 32mm dia wash basin urinal , hdpe water tank 1000 ltrs make sintex js polyplast polycon , exhasut fan 300 mm pvc body make philips crompton orient bajaj havells , looking mirror size 450x600mm , t grid false ceiling 10 feet long , ceiling aluminium grid 2 feet long , ceiling binding wire , ceiling l patti 10 feet long , black star screw , ceiling cement bonded board 2x2 feet , external type 12 watt led light complete make bajaj philips crompton greaves havells , pvc flushing cistern 10 ltrs capacity with complete fitting to wc make hindware parryware cera , pillar tap pvc 15mm dia make prayag seiko kingston , casing capping 25mm 10 feet , insulation tape , 0.50mm th ppgl roofing sheet 17x3.50 feet length , 0.50mm th ppgl roofing sheet 10x3.50 feet length , tapping screw 3 inch , cement opc 53 grade , sand coarse , 20mm stone aggregate , cpvc fta 20x15 mm brass inner thread , cpvc pipes 20 mm outer dia sdr 11 make supreme finolex prince , cpvc pipes 25 mm outer dia sdr 11 make supreme finolex prince , pvc coonection pipe 450 mm , pvc angle cock 15 mm dia make prayag , pvc bib cock 15 mm dia make prayag , pvc piller cock long nose make prayag , waste pipe for urinal , cpvc solution adhesive 100 ml , clamps for cpvc pipes 20 mm dia , cpvc reducer t 50 x 25 mm , cpvc elbow 25mm dia make supreme finolex prince , cpvc union 25mm dia make supreme finolex prince , cpvc stop cock 25mm dia , cpvc tank connector 25 mm dia , thread yarn , thread sealent safeda , tapelon tape , cpvc reducer t 25 x 20 mm , cpvc fta 25x20 mm brass inner thread , cpvc reducer socket 25 x 20 mm , float valve assembly 20mm dia complete make prayag agrotech shakti , pvc pipe 110mm dia make finolex supreme prince , pvc t 110mm dia make finolex supreme prince , pvc elbow 110mm dia make finolex supreme prince , pvc socket 110mm dia make finolex supreme prince , ceiling fan capacitor , ss comb mod 15 a 6 pin with pvc m box , ss comb mod type 5 amp 5 pin pvc m box , switch 5 amp one way modular , curtain rods with 25mm dia for door and windows coupler plug ss brackets knob complete , butt hinges 100mm , pvc pipes 15 mm dia make supreme finolex prince , pvc reducer 20 x 15 mm dia make supreme finolex prince , aluminium sliding door bolt 250 mm length , aluminium tower bolt 150 mm length , tank connector 15 mm dia , pvc fta 15 mm dia , float valve assembly 15mm dia complete make prayag agrotech shakti , synthetic enamel paint white //bid details 2 / 69 , synthetic enamel paint white

CTN :45072246

28 May, 2026 55.70 Lacs

Pune - Maharashtra

Tender For corrigendum : supply of neurosurg consumables d510 dglp d d - antibiotic impregnated vp shunt , programmable vp shunt , oxidised regenerated cellulose size 2 x 3 box of 10 , oxidised regenerated cellulose size 4 x 8 box of 10 , surgicel fibrillar size 2 inch x 4 inch, box of 10 , absorbable porcine gelatin sponge, box of 10 , shunt drape adult , lumber spinal pack , philadelphia collar assorted size , taylors brace , soft cervical collar assorted size , lumbo-sacral belt assorted size , craniofix titanium clamp 16 mm , craniofix titanium clamp 20mm , titanium mini plate 4 hole , self drilling mini screw for cranioplasty 1.5 x 5 mm , self drilling mini screw for cranioplasty 1.5by 7mm , cervical disc prosthesis , prebent occipital cervical rod titanium , cross link connectorcervical with clip , occipital cervical plate large , c1 c2 plate18x4 mm set of two , screws for c1 c2 plate 3.5 x 18mm , percutaneus cannulated pedicle mas screw 5.5 by 40 mm , percutaneus cannulated pedicle mas screw 5.5 x 45mm , percutaneus cannulated pedicle mas screw 5.5 by 50mm , percutaneus cannulated pedicle mas screw 6.5 by 45 mm , straight rod 5.5 mm length 120 mm for percutaneus screw , pedical screw contoured titanium rods 5.5 x 500 mm , expandable transverse cross connector with screws , tubing set disposable for ultrasonic aspirator , stylet 2 coil single package , pointer navigation axiem , burr tool f2 bta23 legend 8cm 2.3 mm taper , tool mr8-7ta11mr87cm taper 1.1 mm , tool mr8-14ba20d mr8 14cm ball dmd 2mm , tool mr8-sp 14ba30 mr8 14 cm sp ball 3 mm , cervical titanium expandable carpectomy cage 28- 36 mm , cervical titanium expandable corpectomy cage 20 mm , medicated iodine impregnated incise drape set , cervical peek cage 8 by 11 by 14mm , cervical peek cage 6 by 11 by 14mm , cervical peek cage 7 by 11 by14 mm , cervical plate 18 mm with four self drilling screws , cervical plate single level 12 mm , cervical plate single level 10 mm , cervical plate single level 14 mm , cervical plate single level 16mm , floseal hemostatic matrix , 3d printed customised titanium cranial implant , ommaya reservoir large , fibrin glue 2ml , craniofix titanium clamp 11mm //bid details 2 / 44

CTN :45303272

02 Jun, 2026 NA

Palakkad - Kerala

Tender For supply of 510ss00114-steering tie- rods kit

CTN :45313369

02 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no. m.mms.exmp.i.05.2026-27.03 description - mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in three places from tin shed to water tank at "i-1" sector. before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser own arrangement.

CTN :45318286

24 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of nd ylf laser rods dia 5 mm x100 mm , nd ylf laser rods dia 7 mm x120 mm

CTN :45306403

30 May, 2026 30.78 Lacs

Faridabad - Haryana

Tender For beautification and development of undeveloped park through plantation of grass, shrubs, open gym, children play equipment etc. in gali no.54 sanjay colony, ward no. 5, faridabad. - transportation all items, installation charge all items, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm nb b class gi-pipe. the handle frame is made of 25mm nb b class gi-pipe. foot rod is made from 50x50 ms square pipe of 3mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f air walker is made from is-1239 b class gi-pipe. the bend pipe is of 80mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 25mm nb c class gi-pipe. the leg frame is made of 32mm nb b class gi-pipe. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick,, p/f horse rider is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and connecting rods is made of 25mm nb c class gipipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick., p/f leg press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick, p/f push-up-bar is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from

Dowel Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others