Latest down converter Tenders | Government down converter Tenders

CTN :45485407

20 Jun, 2026 NA

Hyderabad - Telangana

Tender For supply of 8-channel analog to digital converter, signal conditioner for 1/4-bridge 350 ohm strain gage , 12-channel accelerometer signal conditioning and digitalization

CTN :45475065

18 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For procurement and installation of ece lab equipments - procurement and installation of ece lab equipments, single output variable dc rpsu single output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, dual output variable dc rpsudual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, function generatorfrequency range: 0.1 hz to 2 mhz.display: 4 to 6 digit led displayoutput waveforms: sine, triangle, square, pulse, ramp.amplitude: 0 20 vp-p.rise time: 100 ns.distortion: 1% (within acceptable range of frequencies).power supply: ac 220 v 10%, 50-60 hzoutput amplifier protection: protected against short circuit and 15v overload, digital storage oscilloscopebandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital vo;tmeterdc voltmeter digital 3 digit display (0-100 v), 0.5 % accuracy (class 0.5 equivalent) (2000), digital ammeterdc ammeter digital 3 digit display (0-2 a), 0.5 % accuracy (class 0.5 equivalent) (1500), eliminator transformer (stepdown)input - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, embedded lpc 2148 kit cpu - lpc2148, core - 16/32 bit arm7dmi-s speed - max 60 mhz, flash - 512kb, ram (on-chip) - 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi s eight bit digital output, eight bit digital input, 16 x 2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connectorand usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board example programs in embedded c and assembly with documentation (soft copy) power chord, user manual with cd/dvd, free demonstration after delivery, single phase induction motorsingle phase induction motor, 230v ac, 50hz supply.power rating 1 hp (0.75 kw).speed 1440 rpm.capacitor start/run type suitable for lab useloading setup portable ammeter and digital tactometer contact type, single phase autotransformerinput - single-phase, 230v/240v, 50 hz, 4a, ac output - 0 to 270vac, class "h" or class f insulation., lvdt trainer kitac mains power supply : 230v 10%, 50hzfixed regulated dc power supply : +5v, 12v /500matransducer : lvdtlvdt displacement : 20mm (40mm total)displacement scale : linear 20mmdisplacement display (mm) : red color 3 digit led displayexcitation frequency : 4khzexcitation voltage : ac variable 5v, strain guage trainer kitmetal foil strain gauge mounted on beam/cantileverstrain measurement under applied loadwheatstone bridge arrangementsignal conditioning and amplification circuitinstrumentation amplifiers, 3 digit display of strain / output voltagezero and gain adjustment controlsprovision for applying calibrated loadsregulated power supply, 230 v ac, 50 hztable-top tr

CTN :44991131

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of analog to digital converter with fpga dsp processing

CTN :45469596

16 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of gear belt , transistor type cly 5 , resistor voltage sensitive , resistor voltage sensitive 47v 10 1 0 1w , capacitor , dc-dc converter vicor , microcircuit linear type mga 82563 mga , micro circuit digital type cd74hc4538m96 , capacitor 33uf 25v , capacitor fixed aluminium electrolytic 100 nf , fuse 5 amp , bty nr li thionyl chloride c

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Central Government/Public Sector

CTN :45471223

22 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For battery charging and discharging panel : supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with fine control on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni-cd batteries of 199 ah/110 v capacity and lead acid batteries of 75 ah/110 v capacity. as per scr els/kzj specifications no. c/e.els/kzj/spec/06 copy attached make: signotron/hbl/microtek/amarraja or equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45467039

18 Jun, 2026 12.10 Lacs

Srinagar - Jammu And Kashmir

Tender For supply of revolving chair for offrs high back with steel leg , revolving chair for clerk medium back with steel leg , chair visitor steel flat frame leatherette back , computer chair revolving with steel leg , digital wall clock with date and temperature , scientific calculator bty solar , water dispenser hot and cold , heat pillar , water camper 10 ltr capacity , warmax wall mounted heat converter , white board of size 3 x 4 , paper sadder isi marked , kero heater isi marked , stic handheld elect blower isi marked with good quality qty 03 , hanging lamp , pedestal fan elect , electric kettle 1 point 5 ltr , water bottle 20 ltr , water bottle hot and cold 1 point 5 ltr , cup and soucer , electric weighing machine , towel white large , voltage stabilizer 4 kva , blazer cloth green cloth , lawn mover manual push , waste container

Central Government And Public Sector

CTN :45429853

24 Jun, 2026 NA

Multi City - Assam

Tender For auction sale of depot miscellaneousllaneous scrap - miscellaneousllaneous scrap comprising of empty charger box, tokenless block instrument, pannel box, empty waves emergency battery charger, sm's panel single liner, ufsbi alarm panel, ssdac, single section digital axle counter, rmpu, dip switch, electronic thermostat, micro controller unit, network datalogger, dc-dc converter, empty automatic battery charger box and others miscellaneous electronic items etc. with traces of non-ferrous content. all are fully damage, dismantle and rusty condition scrap. pl no.98985528

State Government

CTN :45440948

20 Jun, 2026 11.50 Lacs

Multi City - Karnataka

Tender For supply of electronic items to vhep - ems-ethernet switch- 16 port, digital display clock, ddu-tm, single core mediaconverter, fibre media converter, walkie talkie - unlicensed, power amplifier for pub add sy, telephone push button type with tone mode / pulse mode with moisture resistance protection, pb telephone junction box, adaptor-mobile signal booster, ofc patch cord sc-lc, adapters 5a, ind. ethernet rail switch brs30, ind. ethernet rail switch brs40, net gear 8 port switch

CTN :45430786

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of electronics andcommunication engineering lab materials - electronics and communication engineering lab materials, dso (digital storage oscilloscope)bandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital ic trainer kit with breadboard5v dc, 1a regulated power supply 12v dc / 15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers, eliminator transformer (stepdown)input - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, decade resistance boxrange: 1 to 10 m , steps: 1-10-100-1k-10k, accuracy 1%, suitable for filter and oscillator experiments, decade inductance boxrange: 1 h to 10 h, rotary switch selection, low loss inductors, accuracy 1%, , suitable for filter and oscillator experiments, 8051 micro controller kitoperating voltage: +5v dc4 kb flash (at89c51) / 8 kb flash (at89s52)ram: 128 bytes internal ram16 2 alphanumeric lcdpush buttons / tactile switchesdip switches for digital inputinbuilt adc interface : ldr,potinbuilt dac interfaceinbuilt stepper motor driver with stepper motorinbuilt dc motor driver with dc motor1x4 led array, 1 x4 keypad, 1x relay1x buzzer, 16x2 lcd display, 1x pwm driver1x hardware interrupt key, inbuilt rtcinbuilt eeprom, inbuilt uart module4x7 segment display, both assembly and c language programmable, pc interfaceable., single phase induction motorsingle phase induction motor, 230v ac, 50hz supply.power rating 1 hp (0.75 kw).speed 1440 rpm.capacitor start/run type suitable for lab useloading setup portable ammeter and digital tactometer contact type, auto transformerinput - single-phase, 230v/240v, 50 hz, 4a, ac output - 0 to 270vac, class "h" or class f insulation., temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd).temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., ask modulation and demodulation kitmessage signal 1 : 8 bit variable data, amplitude 5vmessage signal 2 : debounce data, amplitude low (0) & high (5v)message signal 3 :fixed data 25k, 12.5k, 6.25k, 3.12k, amplitude 5vcarrier signal : sine wave frequency 200 khz, amplitude 5vmodulator type : switching icdemodulator : envelope detector & lpfcomparator : lm 311 basedsupply voltage (board) : +12v, +5v / dcsupply current : 100 ma (minimum)input voltage : 230 v/ 50 hz acinterface connectors : 2mm banana socket, dth trainer kitpower supply 200v to 240v ac, 50hz,dish antenna 1.5 aluminum steerable, lnb low noise block down converterinput frequency ku band.output frequency 950 to 1450 mhz.conversion gain 65 db.noise temp 35 degree k max.set top box receiver in traine

Down Converter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government