Latest dp transmitter Tenders | Government dp transmitter Tenders

Central Government And Public Sector

CTN :45567330

25 Jun, 2026 NA

Malda - West Bengal

Tender For supply of spares for slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5mm (in incremental of 0.1 mm), total of 21 nos, along with calibration certificate. thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gauge surfaces to be ground, sharp corner to be removed.calibration certificate from approved lab to be supplied along withmaterial. [ warranty period: 30 months after the date of delivery ] ]

CTN :45557713

06 Jul, 2026 NA

Bidhan Nagar - West Bengal

Tender For supply of dp transmitter for level measurement

Central Government/Public Sector

CTN :45118858

26 Jun, 2026 NA

Yamunanagar - Haryana

Tender For corrigendum : procurement of oil module and its mandatory spares for 1x800 mw yamunanagar project - motor terminal block ac aop motor , motor terminal block for ac jop motor , motor terminal block for ac ove motor , "motor terminal block for dc eop motor (1 set = 2 nos.)" , "motor terminal block for dc jop motor (1 set = 2 nos.)" , "space heater for ac aop motor (1 set = 2 nos.)" , "space heater for ac jop motor (1 set = 2 nos.)" , "space heater for ac ove motor (if not applicable then space heater for acjop to be provided) (1 set = 2 nos.) " , "space heater for dc eop motor (1 set = 2 nos.)" , "space heater for dc jop motor (1 set = 2 nos.)" , bearings for motor for lube oil pump (aop) , bearings for motor for acjop , bearings for oil vapour exhauster motor , bearings (de and nde) for dc eop motor , bearings (de and nde) for dc liop motor , carbon brushes for dc eop motor , carbon brushes for dc jop motor , brush assemblies for dc eop motor , brush assemblies for dc jop motor , ac motor for lube oil pump (aop) , ac motor for lifting oil pump (jop) , oil vapour exhauster motor , dc eop motor , dc liop motor , lube oil tcv actuator , lt for oil module –m(850-1750 mm) , pressure switch index-d (0.5 - 10 bar) , dp transmitter lube oil filter , rtd (0 to 100°c) for oil module , level gauge for oil module , local gauges (0-10 bar) -oil module , local gauges (0-400 bar) -oil module , pressure gauge ((-)120-0 mbar) -oil module , temperature indicator (0-100 degc) , pr. transmitter range (0-250 bar)-oil mod , pr. transmitter range (0-6 bar)-oil mod , pr. transmitter range (0-(-120) mbar)-oil mod

Central Government/Public Sector

CTN :45494578

15 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of spares for existing 50t eot crane : loco lifting tackler assembly, capacity 65 t for lifting of wap 7 & wag 9 locomotives as per scr drawing no. b/els/bza/7, alt-a, dt: 1.5.2026. (note: in item reference no. 4 of said drawing : diameter of pin for hook shall be 135 mm, length 320mm and lifting hook pin centre distance is 260 mm instead of 324 mm). note: 1) manufacturer name and year of manufacture to be engraved on the tackler. 2) lifting tackle shall be tested to lift 97.5 ttest load before commissioning and test certificate should be provided from nabl certified lab along with supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Corporations And Associations And Others

CTN :45488872

22 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrier as per drawi

Central Government/Public Sector

CTN :45476772

15 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of spares and consumables for bomb calorimeter parr 6200 - lab spr: thermistor bucket,1417e2,parr, heater cartridge,a1459dd,parr,6200, ignition thread, benzoic acid pellets,std, capsule holder,906dd,parr

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

CTN :45439997

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of simulator workstation with rugged controller , drone simulator software licence standard , high fidelity simulator workstation with rugged controller , 3d simulation software licence advanced , vr headset 6 dof and sim compatible , trainer workstation with instructor simulator , 55 inch led display for trainer workstation , networking cabling and power management lan plus ups , workstation desk and ergonomic chair set , split air conditioner 1 and half ton , posters flex banners and cut section models , printer brother t4500 , high performance cad workstation , fdm 3d printer bambu h2d with ams combo , fdm 3d printer bambu h2s with ams combo , fdm 3d printer bambu x1 carbon with ams combo , filaments abs tpu pla plaplus assorted , filament dryer creality space pi x4 or equivalent , resin 3d printer prusa sl 1s or equivalent sla or msla with resin material , industrial 3d scanner creality otter or equivalent , laser engraver and cutter machine 40 watt , wooden tables chairs and workbenches set of 06 , power management fitting and backup inverter 2 kva , advanced drone repair equipment soldering station digital microscope esd mats oscilloscope , drone electronics sensors and spares kit , storage almirahs lockable , posters flex banners and cut section models , 3 axis drone stability test jig with proprietary software , bldc motor thrust test bench with proprietary software , drone sensor integration and testing equipment , gps testing equipment with proprietary software , flight controller assembly programming station , propeller balancer , battery charging and testing station , battery repair station , drone and 3d printer service tools , soldering and rework station yihua 982d iii or equivalet , esd workbenches , workstations for tuning or programming , line of sight trainer uav with controller , vtol trainer uav with mission planner tricopter or quadcopter , fixed wing trainer uav with mission planner , fixed wing vtol uav system with day and night camera dooaf module , day and night enabled quadcopter with dooaf capability , surveillance and payload delivery drone with mission planner hexacopter or octacopter , storage box for drones and accessories , storage almirahs , lab tables and workstations with storage , split air conditioner 2 ton , interactive panel 75 inch or larger 4k uhd, multi touch with ops , 55 inch led display , study chairs with ergonomic and stackable , split ac 1 and half ton , 20 day training programme for 15 individuals with flying repair fabrication with study material , soccer drones with propeller cage , soccer drone arena including netted enclosure with goal posts //bid details 2 / 41

CTN :45449101

26 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of spares part for canon viscometer model mini av-x from oem authorised agent m/s lab india instruments

Dp Transmitter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Co-operative