Latest draft yoke Tenders | Government draft yoke Tenders

Central Government/Public Sector

CTN :41211781

29 Aug, 2025 NA

Hubli - Karnataka

Tender For supply of set of 12 bushings (1) bushing -1.250 id x 1.615 od x 1-1/4"-emd pt no.8052336 qty-18 nos, (2)bushing -1.815 id x 2.240 od x 1-1/4" emd pt no.40026004 qty- 8 nos, (3)bushing -1.375 id x 1.74 0 od x 1- 1/4" emd pt no.8059991 qty-4 nos, (4)bushing -1.125 id x 1.490 od x 1" emd pt no.8052334 q ty-18 nos, (5)bushing -1.500 id x 1.865 od x 1" emd pt no.6915447 qty-18 nos, (6)bushing -1.250 id x 1. 625 od x 3/4" emd pt no.8197960 qty-8 nos, (7)bushing special-1.031 idx1.378 odx1-15/16" emd pt no.4 0082937 qty: 08nos, (8)bushing -1.125 id x 1.490 od x 1-1/4" emd pt no.8065520 qty- 20nos, (9)bushing -1.375 id x 1.754 od x 3/4" emd pt no.8068058 qty-16 nos, (10) ferrule.. brake head - 1.798 o.d. x 1.37 5 i.d. x 1.100 inches emd pt no.40022316 qty-4nos, (11)bushing -1.375 id x 1.740 od x 5/8" emd pt no.83 36929 qty-16 nos, (12) bushing - 1.815 id x 2.240 od x 5/8" emd pt no.40023405 qty-16 nos. (note: item to be procured from approved source of dlw to parent assembly to dlw part no: 17021182, 17022678 acc eptable) (note: dlw/rdso approved source only acceptable). [ warranty period: 30 months after the dat e of delivery ]

Central Government/Public Sector

CTN :40665021

30 Jul, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : supply of rocker fork etc e e - rocker fork for 2650t press as per drawing 01 05 130 , thread coupling as per drawing 01 05 005 r2 item no 1 to 4 , lifting rod as per drawing 01 05 236 , mu 25 valve cone for 2650t press as per drawing 01 05 237 sheet 1 , mu 25 valve seat for 2650t press as per drawing 01 05 237 sheet 2 , h c clamp 12 inch copper insert as per drawing 02 01 008 r5 , lift rod of drive system as per drawing 021 01 172 sheet 4 of 9 , rod end of drive system as per drawing 021 01 172 sheet 3 of 9 , screw fitting of drive system as per drawing 021 01 172 sheet 01 of 9 , safety plate of drive system as per drawing 021 01 172 sheet 7 of 9 , guide of drive system as per drawing 021 01 172 sheet 2 of 9 , bushing and ring item no 1 and 2 of drive system as per drawing 021 01 172 sheet 6 of 9 , bolt of drive system as per drawing 021 01 172 sheet 9 of 9 , ball socket of drive system as per drawing 021 01 172 sheet 5 of 9

CTN :41162811

01 Aug, 2025 40.0 Thousand

Kota - Rajasthan

Tender For supply of injector nozzle item 13 c c - injector nozzle , pump element , delivery valve , distance piece , avr , parts set , head distributer , cam plate , guide bushing , supply pump , bearing 32309 and 32212 , roller , sealing

Central Government/Public Sector

CTN :41147260

31 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of porcilain insulator (antifog) for 36 kv 2000 amps bushing as per drg 24990300008 rev-03c, item 01

Central Government/Public Sector

CTN :41147293

31 Jul, 2025 NA

Haridwar - Uttarakhand

Tender For supply of spare parts of flowmore make cold water pump d d - spare parts of flowmore make cold water pump nwph typeh c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250 capacity 850 m3 hr head70 m item name wearing ring impeller moc cast steel , spare parts of flowmore make cold water pump nwph typeh s c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250capacity 850 m3 hr head70 m item name wearing ring casing moc ciis210 fg260 , spare parts of flowmore make cold water pump nwph typeh s c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250capacity 850 m3 hr head70 m item name water seal ring mocbronze is318 ltbii , spare parts of flowmore make cold water pump nwph typeh s c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250 capacity 850 m3 hr head70 m item namestuffing box bushing mocciis210fg 260 , spare parts of flowmore make cold water pump nwph typeh s c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250 capacity 850 m3 hr head70 m item nameshaft sleeve moc ss410 , spare part of flowmore make cold water pump nwph typeh s c fig5824 sr no 18053481 1001and sr no 18053481 1002 size300x250 capacity 850 m3hr head70 m item namesleeve nut nd lock nut for sleevemoc steel , spare parts of flowmore make cold water pump owph typeh s c fig5824 sr no 22085804 1001 size300x250 capacity 850 m3 hr head50 m item name wearing ring impeller moc cast steel , spare parts of flowmore make cold water pump owph typeh s c fig5824sr no 22085804 1001 size300x250 capacity 850 m3 hr head50 m item name wearing ring casing moc ciis210 fg260 , spare parts of flowmore make cold water pump owph typeh s c fig5824 sr no 22085804 1001 size300x250 capacity 850 m3 hr head50 m item name water seal ring mocbronze is318 ltbii , spare parts of flowmore make cold water pump owph typeh s c fig5824 sr no 22085804 1001 size300x250 capacity 850 m3 hr head50 m item nameshaft sleeve moc ss410 , spare partof flowmore make cold water pump owph typeh s c fig5824 sr no 22085804 1001 size300x250 capacity 850 m3 hr head50 m item namesleevenutand lock nut for sleeve de moc steel grade steel

Central Government/Public Sector

CTN :41161773

07 Aug, 2025 NA

Erode - Tamil Nadu

Tender For high voltage bushing to clw spec no. clw/es/3/0052 alt.d (or ) latest. note:1) supply by sources as per clw item id: 2100518 in ireps vendor directory. 2) firm should submit authorised dealership certificate along with tender otherwi se offer will not be considered. [ warranty period: 30 months after the date of delivery ]

CTN :40423675

18 Sep, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - relay, diode, relay, rail, module, subassy, switch (s3) attaching parts, back up ring, spring, box assembly, poppet, switch subassy (s4) attaching parts, cylinder, piston, shoulder ring, end cap, oil, screw cap, end cap, air, end cup, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, setscrew (opt to item 90), gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assem bly of hydraulic flow regulator, label, cap-port s/a, spring, body, equalizer, end, housing, adjusting screw, adjustable cam, cover, body, shaft, splined, harness, body, assembly, cam and piston s/a, face-seal mating, pin cam index, front housing s/a, seal and retainer s/a, shaft and bearing s/a, spring-helical compression, washer thrust, spacer, bushing, actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, terminal (96736 scd 99-1008-3), seat, box assy, box assembly, head, body, washer, flat, carriage, spindle, receptacle, it is a sub-assembly of light control box, switch, micro, relay, 2pdt, type i attaching parts, relay, follower, angle, plate assembly, plate, safety walk, plate, safety walk, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), pin poppet, carrier, bearing attaching parts, switch assy (s1) attaching parts

CTN :40437644

23 Sep, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - flow meter 510, needle valve 502, pressure relief valve 504, filter element 5 absolute, air pressure regulator 527, pressure reducer valve 503, air pressure gauge 531, pressure gauge 517, pressure gauge 516, pressure gauge 539, pressure gauge 532, pressure gauge 537, pneumatic control valve, auto/manual switch, pneumatic controller, fuel disconnect, filter, module, o-ring, relay, diode, face-seal mating, relay, iso chain, l=61.25 (102 pitches), washer, shoulder ring, screw cap, setscrew (opt to item 90), bushing teflon, seal and retainer s/a, retainer-seal and bearing, washer thrust, seal, plain encased, washer (order nha item 6), rail, washer, flat, screw, screw, cap, socket head, .1380-32 thd x .750 lg, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, subassy, switch (s3) attaching parts, box assembly, connector circ. mount, switch subassy (s4) attaching parts, cylinder, piston, end cap, oil, end cap, air, end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydra ulic flow regulator, label, cap-port s/a, plate cam, name plate, name plate, sleeve, cover, body, shaft, splined, body, assembly, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel-cylinder, mounting flange s/a, pin-cam index, front housing s/a, shaft and bearing s/a, collar-hold down, shaft- internal drive, bushing- spline, spring-helical compression, plate- hold down, spacer, bushing, cup (order nha item-6), actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, gasket, terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), box assy, box assembly, worm, machined, module, connector attaching parts, receptacle, it is a sub-assembly of light control box, switch, micro, relay,2 pdt,type i attaching parts, pin, straight, 0937 dia attaching parts, relay, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), spool and piston subassembly, spool; compensator(matched set order nha item-290), piston, stroking, piston, rate, barrel cylinder, piston, blocking 9matched set order nha), port cap, bearing, cylinder barrel, elbow, flange- mounting, packing, perfor med

CTN :41118160

19 Aug, 2025 NA

Liluah - West Bengal

Tender For supply of kit no.11 for slack adjuster type irsa-600 as per rdso's specn.no.07-abr-92. with 5 a mendments last amendment no.5 issued on september 2016 consisting of five items: 1) adjuster ear to rdso's drg no-wd-82064-s-10-rc, item no-1, alt no-12, qty/set-01 no. 2) ear bushing to rdso's drg no-wd-82064-s-10-rc, item no-6, alt no-12, qty/set-01 no. 3) adjuster tube to rdso's drg no-w d-82064-s-05-rc, item no-5, alt no-7 (seven) , qty/set-01 no. 4) adjuster tube socket to rdso's drg no-wd-82064-s-06-rc, item no-2, alt no-4 (four), qty/set-01 no. 5) actuating sleeve to rdso's drg n o-wd-82064-s-06-rc, item no-1, alt no-4, qty/set-01 no. [ warranty period: 36 months after the da te of delivery ]

Central Government / Public Sector

CTN :41103742

06 Aug, 2025 NA

Vijayawada - Andhra Pradesh

Tender For set of bushing porcelain insulators(top & bottom) for the main transformer of 7775 kva in 3-phase locos as follows.1) dt 3/2000 of abb drawing no. hstn 310508. qty/set. = 20 nos.2) dt 3/1000 of abb drawing no. hstn 310507. qty/set. = 10 nos.3) dt 3/630 of abb drawing no. hstn 310506. qty/set. = 10 nos.4) dt 1/250 of abb drawing no. hstn 310500. qty/set. = 20 nos.note: one sample of each item should be got approved before effecting bulk supply.

Draft Yoke Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector