Tender For rate contract for supply of handpump set and spare parts - supply of handpump set and spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting rod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll), front cover, handle for deepwell hand pump (is: 15500 part 4), stand assembly telescopic for deepwell hand pump, ring spanner 17*18, crank spanner 17*18, i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete
Tender For supply of set of frp side wall panels for lhb chair car for 200 kmph with automatic doors, as per drawing: mplswpljsczac version 11, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3 nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separatelyin cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing shouldhave indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that onecomplete coach set can be easly identified. the maximum weight of the wooden crate should not be more than 200 kgs. a list should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ] ]
Tender For supply of various types of sanitation materials - phenyl tablets (per kg), acid (per liter), dtp powder (50 kg packing), malaria oil (per liter or weight-based pack), nuvan / mosquito repellent (per liter or weight-based pack), gum boots (various sizes, per pair, branded companies), lindane powder (per 25 kg bag), black/white phenyl (isi marked, per liter), fogging solution (per liter), toilet cleaner (per liter), weed killer (per liter), ammonia granules (per kg), herbal powder (per kg), perfumed phenyl (per liter), pine cleaner (per liter), carbolic powder (per kg), sarvolic powder (per kg), phenolic powder (per kg), rogor insecticide (per liter), bio-inoculant kit (35 kg per bag), all-purpose solution (per liter), herbal cleaning solution (per liter), md hygiene powder (per kg), temephos (liquid) (per liter), pyrethrum (liquid) (per liter), iron pan (medium size) (per piece), plastic pan (medium size) (per piece), shovel (with handle) (per piece), pickaxe (with handle) (per piece), bamboo broom (per piece), bamboo basket (per piece), shovels (per piece), trowel (per piece), sickle (per piece), iron sledgehammer (per kg), iron crowbar (heavy duty) (per kg), floor wiper (per piece), iron bucket (10") (per piece), iron bucket (12") (per piece), iron bucket (14") (per piece), plastic bucket (various sizes) (per piece), fogging machine (aspe) (per piece), fogging machine (black stone) (per piece), garbage cart (5 cu. ft. capacity) size 32"x32"x3" angle frame, 18-gauge m.s. sheet, 18" solid rubber wheels (with mat) — per unit, pole-mounted dustbin: 3"x3" channel-type pole, 18"x18"x20" / 16-gauge sheet, floor cap, movable mechanism — per unit, manual lawn mower — per unit, automatic lawn mower — per unit, small grass shears (12") — per unit, large grass shears (24") — per unit, large fogging machine: 2x7 litre capacity petrol tank, 130 litre capacity chemical tank (trolley-mounted) — per unit, dustbin carrier (4-dustbin capacity) — per unit, dustbin carrier (6-dustbin capacity) — per unit, small draincleaningmachine — per unit, fixed dustbin (1 cubic meter capacity) — per unit, single urinal — per unit, double urinal — per unit, raincoat (male) — per unit, raincoat (female) — per unit, shredder for wet waste disposal, conveyor for wet waste disposal, sorting table for wet waste disposal, wet waste collection cart, bio-culture — per litre, booster — per litre, anti-larval / anti-malarial oil — per litre, fogging machine solution — per litre, waste cart wheel — per unit, harpic — per litre, marble powder — per 50 kg pack, sodium hypochlorite — per litre, face mask, hand gloves, jacket — per unit, hand sanitizer — per litre, liquid hand wash — per litre, hand-washing soap — per unit, cobweb broom — per unit, odonil — per unit
Tender For auction sale of others - cpcb item - sc. used transformer oil filled in 26 nos plastic drums [capacity 210 ltrs] and 13 nos ms drums [capacity 210 ltrs]. condition-1] purchaser crane/fork lifter may be allowed for delivery purpose at their own cost, 2] the sold lot is to be noted in the cpcb pass book of the purchaser before release of sro, 3] materials will be delivered on as is where is basis, 4]delivery to be made on actual volume basis, 5] sc. used transformer oil will be delivered along with drums.
Tender For supply of set of frp side wall panels for lhb slr hog coaches (31-seater). follow colour shade as per l.no. md46271 dated 18.01.2021., as per drawing: mplsplwslrd version 2, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallicparts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separately in cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing should have indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that one complete coach set can be easly identified.the maximum weight of the wooden crate should not be more than 200 kgs. a list should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ] ]
Tender For supply of set of frp side wall panels for lhb ac2t coaches, as per drawing: mplswp2telversion 27, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3 nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separately in cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing should have indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that one complete coach set can be easly identified. the maximum weight of the wooden crate should not be more than 200 kgs. alist should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ]
Tender For supply of set of frp side wall panels for lhb chair car for 200 kmph with automatic doors, as per drawing: mplswpljsczac version 11, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3 nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separatelyin cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing shouldhave indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that onecomplete coach set can be easly identified. the maximum weight of the wooden crate should not be more than 200 kgs. a list should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ]
Tender For corrigendum : supply of three vessels hot case or similar: - three vessels hot case pulf insulated, double walled sturdy carrier molded out of virgin food grade plastic polymers consisting of fully insulated plastic body and lid with attached soft polypropylene carry belt for easy carrying purpose, consisting of three non-magnetic stainless steel containers with stainless steel lid stainless steel lifter as per the details given below. capacity: -i) volume of fully insulated plastic body only without top insulated plastic body lid=2750 ml or more. ii) volume of one single stainless-steel container with stainless steel lid=650 ml or more. weight: -i) weight of onesingle stainless-steel container with stainless steel lid=115 gm or more. ii)weight of stainless-steel lifter (forstainless steel containers) =60 gm (min) iii)total weight of empty fully insulated double wall plastic body along with top insulated plastic body lid and soft polypropylene carry belt=550 gm(min). identification marksmarking: molded logo/brand of the company should be provided on button of the product. railway marking: the manufacture to do ?rpf? logo printing on the outer body of the hot case red colour. colour: stainless steel/silver. strap: adjustable shoulder strap (a handle of sufficient length should be provided for easy carrying purpose. heat insulation: the temperature of food should not be less than 10 degree centigrade approx. from storage temperature normally after 05 to 06 hrs. [ warranty period: 30 months after the date of delivery ]