Latest drain pipeline laying Tenders | Government drain pipeline laying Tenders

CTN :45224098

18 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of supply of gravel granular gsb 250mm 125mm low grade aggregates , supply of geo textile of size 4 point 5mtr x 100rm over gsb with min 300mm stone aggregate as in drain , supply of geo grid of size 4 point 5mtr width x 100rm below gsb with min 300mm stone aggregate as in drain , opc 53 grade cement , sand for coping , aggregate 20mm , supply only fine sand , supply only water based prepolymer urethane , supply of paver block siz 225mm x112 point 5mm x100mm , rubber hammer , brick trawel , pan mortar std size , hand gloves rubber , digital compression testing machine , spacer clips , special mask for chemical laying , wire mess for seiving sand 8 feet x 5 feet , phawrah with handle make , measuring tape 5 m ai 16 , water level pipe 30mtr roll , mason thread 100 mtr long roll , sprit level 10 inch , broom sticks , concrete saw electric

CTN :45552467

19 Jun, 2026 5.00 Lacs

Chittorgarh - Rajasthan

Tender For supply and laying of reinforced cement concrete pipe as per requirement in municipal area akola.

State Government

CTN :45519882

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat chimbali. - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole 1-3-3, supplying and e

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

Central Government/Public Sector

CTN :45512816

23 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 45 )items as given below ,[1] scrapping,moorum over wbm surface 100.000 m2,[2] earth wrk,box cutg,175m 1400.000 m3,[3] dressing and chilchalling road flanks 100.000 m2,[4] disposal,debris 1000.000 m3,[5] lay bitumin macadam,hotmix plnt,15-20tph 1250.000 m3,[6] layg thk20mm premix carpet,hotmix palnt 84000.000 m2,[7] layg 6mm nominal thick premix carpet 84000.000 m2,[8] layg tack coat,wbm surface,4kg/10m2,m/c 20100.000 m2,[9] providing & laying tack coat over wbm 5000.000 m2,[10] layg tack coat,wbm surface,3kg/10m2,m/c 84000.000 m2,[11] providing & laying tack coat bituminous 168000.000 m2,[12] supply,sand including spreading 250.000 m3,[13] supply of moorum including stacking 20.000 m3,[14] labour f/spreading moorum to proper lvl 20.000 m3,[15] supply approve quality stone metal&stack 600.000 m3,[16] applg,thermoplastic paint 3600.000 m2,[17] instln 3m microprismatic lens cats eye 3000.000 ea,[18] scrapping, cleaning etc. 50000.000 m2,[19] supply approved quality slag metal&stack 180.000 m3,[20] extra over premix carpet for plastic use 21000.000 m2,[21] extra over seal coat for plastic use 21000.000 m2,[22] supply and installation of bumps 70.000 m,[23] dismantling of brick work 5.000 m3,[24] disman of pcc 5.000 m3,[25] disman,rcc 5.000 m3,[26] prvdg&placing,steel reinf 2.000 to,[27] rcc,w/down stone chips,1:1.5:3 10.000 m3,[28] flyash br wrk,230mm,m7.5,super sturcture 5.000 m3,[29] plaster,cement mortar,thk12mm 50.000 m2,[30] nmnl mix,m-15 cc w/grd stone,f/basement 5.000 m3,[31] ctrld cc grd m30 mix,gnd flr 20.000 m3,[32] supply,hume pipe,dia300mm 5.000 m,[33] prvdg,layg,jtng,r.c.hume pipe,450nb 5.000 m,[34] supply,hume pipe,dia500mm 5.000 m,[35] microsurfacing type-ii 7000.000 m2,[36] microsurfacing type-iii 3500.000 m2,[37] providing and laying 25mm thick mastic 10500.000 m2,[38] providing and laying dense graded bm 1260.000 m3,[39] providing and laying bituminous concrete 940.000 m3,[40] providg bituminous concrete with plastic 300.000 m3,[41] wet mix macadam base course 630.000 m3,[42] labour for spreading stone 630.000 m3,[43] labour for spreading slag metal 189.000 m3,[44] sweeping,road mechanically 10500.000 m2,[45] prvdg,shuttering 200.000 m2

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45490577

18 Jun, 2026 5.00 Lacs

Chittorgarh - Rajasthan

Tender For supply and laying of reinforced cement concrete pipe as per requirement in municipal area akola

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

State Government

CTN :45480360

15 Jun, 2026 2.89 Lacs

Mandi - Himachal Pradesh

Tender For restoration of damages on fithu ka parua to harizan basti balu bhadrol road km 0/00 to 2/500 (sh: providing and laying wbm g-i, g-ii cement concrete pavement 900 mm dia hume pipe culvert at wing wall at rd 1/585 to 1/640)

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Drain Pipeline Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government