Latest draw bar Tenders | Government draw bar Tenders

corporations/Associations/Others

CTN :41819188

22 Sep, 2025 1.39 Lacs

Davangere - Karnataka

Tender For purchasing of small spade with handle,crow bar,plastic ghamela,sickle,metal cupboard,wooden table, chair to ugd staff of davangere city corporation

CTN :41814796

03 Oct, 2025 NA

Multi City - Multi State

Tender For supply of ms square pipe 1 inch , ms square pipe 1.25 inch , ms square pipe 1.5inch , flat metal bar 2 inch , flat metal bar 4 inch , angle iron , flat metal sheet 8 x 4 feet size , tarpaulin size 3 x 15 mtr , nuts size 3 inch , bolt size 6 inch , self screw star screw with washer size 1.25 inch , velcro width 1.5 inc , paint white , paint red , paint dark brown , paint dark blue , paint yellow , paint black , paint green , thinner , turpentine oil , anti-rust coating primer paint , welding rod , adhesive , cutting wheel 04 inch qty , grinding wheel 04 inch , drill bit 8 mm , drill bit 10 mm , drill bit 12 mm

CTN :41822294

04 Oct, 2025 NA

Multi City - Andhra Pradesh

Tender For supply of hot dip galvanized metal open bar gratings for coal handling plant during the year 2025-26

CTN :41797263

26 Sep, 2025 NA

Buldana - Maharashtra

Tender For supply of providing and installation of sun dia , providing and installation of wind soak , providing and installation of maxima , providing and installation of planks law , providing and installation of solar water heater , providing and installation of world time , providing and installation of globe , providing and installation of dna , providing and installation of periodic , providing and installation pf crystal , providing and installation of parabolic , providing and installation of pythagoras , providing and installation of state bar , providing and installation of vortex , providing and installation of anemometer , providing and installation of archi , providing and installationcentrfugal force , providing and installation of gyroscope , providing and installation of lifting screw , providing and installation of solar pump , providing and installation of sine wave , informatin of each exhibit on metal board

CTN :41674828

16 Sep, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of cleaning duster (v3) (q3) , scrub pad (q4) , tissue papers (v2) (q4) broom (v3) (q4) , household laundry detergent powders as per is 4955 (q4) dishwashing products (v2) as per is 6047 (q4) type (v3) conforming to is 1061 (q3) , toilet cleaner liquid is 7983 (q4) , stable bleaching powder (v2) for treatment of water intended for drinking conforming to is 1065 (part 2) (q3) , toilet soap, liquid (v3) conforming to is 4199 (q4) , air freshener liquid (v2) (q3) per is 539 (q4) , urinal cubes - deodorizer block (v2) (q3) (q4) , domestic mugs - bathroom (q3) , gloves -handicraft (q3) brush (q3) , squeegee washer wiper mopper (v2) (q4) polyethylene bucket (q4) , dust pans (q4) , bamboo, tent pole as per is 7344 (q3) , household insecticides (v2) (q3) , portable sealed rechargeable single cells - nickel - metal hydride (rechargeable batteries) as per is 16048, 16046 (q3) , mosquito repellant cream spray and lotion (q4) conforming to is 5487 (q3) , glass cleaner, liquid (v3) conforming to is 8540 (q3) , bathing soap bar (v2) (q4) , wax candle as per is 11359 (q4) matches in boxes as per is 2653 (q4) , button cell or coin cell battery (q3) glass coaster (q3) , transparent plastic sheet(bhel) (q3) per is 14661 (q3) , elastic surgical adhesive tapes (v2) (q2) , air freshener solid or gel (v2) (q4)

CTN :41799657

22 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of lv7 itr beml 5306-004719 50-151 eye bolt for draw bar , lv7 itr beml 2530-004623 50-82 dust shield lot 1 , lv7 itr beml 2510-000655 cover assy , lv7 itr beml 50-474 locking plate 60 x 32 lot 1 to 4 , lv7 itr beml 50-173 hand brake wheel lot 2 to 4 , lv7 itr beml 6220-000052 1 light unit tail light b 80 n , lv7 itr beml 2530-002539 cover wheel hub cast iron lot 1 2 3 and 4 , lv7 av-15 574-713-009-000 limit switch do 500339 , k9 bmp nbc 675-71-225 oh-4357 gasket , lv7 krz 238-1601131 driven disc

Central Government/Public Sector

CTN :41795558

18 Sep, 2025 99.5 Thousand

Siliguri - West Bengal

Tender For supplying and fixing of electrical fitments for newly constructed toilet of d coy barrack and new jamin toilet at stc bsf of north bengal electrical installation - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group b, rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. group b, wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire., wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., supplying and fixing 3 pin 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required. 3 pin 5 amp, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. size : 180mm x 100mm x 60mm deep., supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way , double door., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutralsingle pole and neutral., earthing with g.i. earth pipe of following size including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.5 metre long, 40 mm dia ., supplying and laying following size g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with gi thimble etc. as required.6 swg., supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. standard make., add applicable rate of gst @18% in place of 12% (0.0633mf) on dsr item. s no.(1 to 12), add 1% labour cess on s no. (1 to 12) + s no.13, modified estimate cost after using correction factor on account of gst @ 0.973 on dsr items s no. (1 to 12) + s no.13 + s no.14, supplying and fixing 3 mm thick phenolic laminated sheet cover in front of ms switch box including making hole and al. alloy/ cadmium plated iron screws, 20 mm, washers etc. as required.hylem/formica/anchor/as approved by engg incharge., supplying and fixing of 6 watt surface type trim cosmo panel square shape led light suitable for 240 volt, single phase, 50

Central Government/Public Sector

CTN :41797228

22 Sep, 2025 5.84 Lacs

Mumbai - Maharashtra

Tender For supply of dry chemical powder , broom country , flag national size 7 , flag cg ensign size 4 240 x 120 cm , flag cg ensign size 7 ib acv 30 x 15 cm , paint roller refill 4 inch , white spirit , turpentine oil , paint roller 6 inch , grease lg 200 , feather broom phool jhadu , abrasive cleaning pad or scrubber pad , super mop refills , polish metal brass , duster cloth , cloth sponge , cleaner white toilet or harpic , cotton waste , cloth stocknite or mutton cloth , brush sweeping hand , cleaning liquid for utensils , cleaning bar for utensils 500 gms , disinfectant fluid white or black phenol , rags cotton coloured , hand towel , steel cleaning liquid , spin mop set , wiper long handle , brush with handle , scrubber with handle , hand wash liquid , glass cleaner 500 ml , plastic mug , detergent powder , room freshener , pest seal , dust bin , bag biodegradable for garbage , deodoriser refill 8 cm x 3 cm , soap liquid toilet , refill for automatic air freshener 250 ml , rat sticking gel , naphthalene balls , mosquito repellent machine , spray hand liquid insecticide , ncml solution teepol , ncml solution phosphoric acid , ncml solution oxalic acid , ncml solution thiourea , distilled water , brown sheet laminated , distemper white isi mark , paint brush 4 inch , paint brush 2 inch , fiber dust brush , paint roller 4 inch , paint roller 7 inch , clip jubilee 3 inch , paint roller 9 inch , photocopier paper 215 mm x 342 mm full scap , dvd , xerox paper sizes 210 x 297 x mm a4 80 gsm , envelope cloth coated 12 x 16 , envelope cloth coated 10 x 14 , envelope size 10 x 14 , envelope size 6 x 12 , envelope size 4 x 10 , tape transparent 2 inch , toilet paper , m seal or equivalent , candle wax , xerox paper 80 gsm 420x297 mm a3 , paper napkin , 5 minute steel putty sf or quick dry steel putty , wet surface repair putty , pencil battery dry 1.5 v r6 , safety gloves , teflon tape , wonder tape 2 , bag gunny 27 x 21 , synthetic foot mat 3 x 2 feet , paint black heat resistant , paint black enamel , paint azure blue , paint aluminium heat resistant , epoxy red oxide primer , varnish , grease lg 280 , aquabond putty , paint green , paint white interthane 990 light grey , paint dark grey , paint navy blue , paint golden yellow , paint fluorescent yellow , paint fluorescent red , paint fluorescent green , paint epoxy aluminium primer , paint priming coal tar epoxy black , paint rfu priming red lead , paint yellow zinc chromate , paint white enamel , paint red oxide , thinner general purpose , paint silver , paint signal red , paint olive green primer , cable casing , wire connection lugs , cable electric 2 core cu wire flexible //bid details 2 / 81

Central Government/Public Sector

CTN :41799867

03 Oct, 2025 NA

Raigad - Maharashtra

Tender For tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

Central Government / Public Sector

CTN :41556356

12 Sep, 2025 NA

Secunderabad - Telangana

Tender For corrigendum : supply of hex. head bolt complete consisting of 3items [hex. hd bolt m20 x 85mm along with castle nut & split pin] for draw bar arrangement to ryps drg. no. ryps/scr/c&w/sk-0261, items - 1, 2 & 3, alt-nil.

Draw Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector