Latest drawer channel Tenders | Government drawer channel Tenders

CTN :45484258

19 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of dome camera night vision 3mp , 64gb memory card , installation testing , 4mp ip bullet camera with dual light and audio , 16 channel nvr cp plus , camera installation , 5x5pvc box , rj45 with crimping , 4u rack for nvr poe switch , 8 plus 2 port poe switch , 4tb surveillance hard disk 3y warranty , nvr harddisk poe switch installation , wallmount bracket 43inch tv , 43inch tv plus wall bracket installation , rack fitting , cat 6 cable 23awg with open cable lying , hdmi cable 4k 3meter

CTN :45478356

29 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of copper sulphate , u/g cable armoured , mcb , socket piano modular type , u/g cable armoured , bell push , u/g cable armoured , plug top , lamp holder , lamp holder , kitchen sink with drainge board , glass pane , wire mesh , aluminium door closer , brass cp hand shower rose with pvc tube , wc seat cover (pvc) white colour , pvc cover , glass pane , glass pane , ptmt angle stop cock , bronze angle cock with flange , pvc connection , cp brass conceled spindle with cp head , pvc waste pipe , float valve , brass spindle for concealed stop cock , ss sliding door bolt , cp grating , rubber beading , ptmt stop cock , internal kit complete , gate valve , piller cock , ss handle anodised , ss sliding door bolt with hasp , ss anodised tower bolt , ss anodised hasp and staple , putty oil for glass pane , butt hinges ss , pvc waste coupling , butt hinges ss , fancy type decorative pvc sheathed gi curtain hanging rod , ss bracket chromium plated for curtain rod 19mm to 20mm , brass cp concealed stop cock , brass washer jumper 20mm qty 100 nos eact packet , brass washer jumper 15mm qty 100 nos eact packet , pvc shelf , ss cromimum bracket for 25mm dia , telescopic channel set 20 inch , telescopic channel set 22 inch , pvc 18mm thick both side plain board , damproof paint raincoat

CTN :45467579

29 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of static sentry surveillance and detection system , ir camera , 4mp ptz camera , 4mp bullet camera , 4k ptz camera , ptz camera rain shield , ir camera rain shield , patchcord sc to sc pigtail cable , 55 inch led tv , junction box , media converter , pole with hanging bracket 65 mm 20 ft , 50 inch led tv , monitor 24 inch , key board , wireless mouse , 8 channel network video recorder , rj 45 , motion sensor light , armoured ofc cable 12 core , service cable armoured 2 core 10mm , pvc cable 1.5mm 1x90 , cat 6 cable , extension cord , lan tester , nylon plastic tie 6 and 8 inch , splicing machine , 3 kva ups , solar inverter with bty 2 kva , core i5 laptop , ni enabled drone

CTN :45470089

16 Jun, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of plywood 19mm 4 x 8 ft , plywood 12mm 4 x 8 ft , plywood 14mm 4 x 8 ft , drawer channel 1 inch , hinges half inch x 0.75 inch , door catcher , nails 2 inch 14 no , nails 17 no , nails half inch slim , fevicol marine , beeding half round , chinese screw half inch , grinder paper 60 no , grinder pad , sunmica 8mm

Central Government/Public Sector

CTN :45261449

25 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of 1 wedge , 2 wedge , 3 lh-cutout edge member bottom -fwd , 4 rh-cutout edge member , 5 rh-tee member -sta -4 , 6 bracket-bot -drouge light , 7 bracket-lh-x-5360 , 8 bracket-rh-x-5360 , 9 bottom reinforcement bracket -sta-1 , 10 bracket-lh -x- 5360--top , 11 bracket-rh -x-5360--top , 12 bracket-lh -x-5360- bottom , 13 bracket-rh -x-5360- bottom , 14 cross beam -sta-15- -x-4670- , 15 bracket-lh-bottom floor sta-15to st , 16 bracket-rh-bottom floor sta- 15 to s , 17 beam -sta-13- , 18 bottom frame - bulkhead sta-17- , 19 bottom frame -sta-19- , 20 splice bracket-lh -sta-20- , 21 splice bracket-rh -sta- 20- , 22 bridging bracket-sta-16--17- , 23 bracket- external handle , 24 tee-back up fitting o-b-rh--sta- 25 , 25 tee-o-b rh -gun bay floor--sta- 22 , 26 cover plate-i-b , 27 cover plate-o-b , 28 longeron -air channel - shear wall- , 29 longeron -air channel - shear wall- , 30 shear wall longeron -top- -sta-28 t , 31 shear wall longeron -top- -sta-28 t , 32 tee o-b - lh-top- x-6450 , 33 tee o-b -lh-top- x-6450 , 34 u-c door hinge fitting-i-b-sta-25 t , 35 u-c door hinge fitting-i-b-sta-25 t , 36 u-c door hinge fitting -o-b-lh -sta , 37 top floor-lh_-sta-31 to sta-32- , 38 top floor-rh-sta-31-sta-32- , 39 fitting-outer-lh--wing pickup--sta- , 40 fitting-outer-rh--wing pickup--sta-

corporations/Associations/Others

CTN :45431388

30 Jun, 2026 1.51 Crore

Jodhpur - Rajasthan

Tender For 1.4 m long m.s. channel bracket with clamp - supply of 1.4 m long m.s. channel bracket with clamp as per tender specifications tn-2155

State Government

CTN :45433596

19 Jun, 2026 1.40 Crore

Etah - Uttar Pradesh

Tender For supply of supply of stone pad , supply of ms top channel , supply of ms dropper channel , supply of ms t off channel , supply of lt clamp , supply of danger board , supply of prc connector , supply of i hook , supply of dead and clamp , supply of suspension clamp , supply of ms angle , supply of barbed wire , supply of f clamp , supply of number plate , supply of holding clamp , supply of double pole clamp , supply of e bracket , supply of henley type lailless unit , supply of lt pvc cable , supply of distribution box clamp , supply of clamp with nut and bolts , supply of allunimum lug 25 kva tf , supply of allunimum lug 63 kva tf , supply of allunimum lug 100 kva tf , supply of allunimum lug 250 kva tf , supply of allunimum lug 400 kva tf , safe carriage of pcc 8.5 m pole , safe carriage of st pole 9 m pole , safe carriage of st pole 11 m pole , safe carriage of 25 kva tf , safe carriage of 63 kva tf , safe carriage of 100 kva tf , safe carriage of 250 kva tf , safe carriage of 11 kv pin insulator , safe carriage of 11 kv disc insulator , safe carriage of 11 kv disc fitting , safe carriage of 11 kv fuse set , safe carriage of earthing , safe carriage of lt ab cable , safe carriage of lt xlpe cable , safe carriage of acsr weseal conductor , safe carriage of lt pvc armoud cabler , safe carriage of distribution box , safe carriage of stay set complete , erection of pcc pole 8.5 m single support , erection of st pole 11 m single support , erection of st pole 9 m single support , erection of pcc pole 8.5 m double pole , erection of st pole 11 m double pole , laying sagging of weseal conductor , laying sagging of lt ab cable , laying sagging of lt xlpe cable , laying sagging of lt pvc armoud cable , laying sagging of lt pvc cable , erection of plinth 250 kvatf , providing and installation of fancing , erection of pipe earthing , mounting of 25 kva tf , mounting of 63 kva tf , mounting of 100 kva tf , mounting of 250 kva tf , erection and grouting of stay , erection of stone pad , fixing of barbed wire , fxing of danger board , fxing of number plate , erection of earthing complete , erection of 3 phase distribution box , erection of dead end clamp , erection of prc connector , erection of 11 kv fuse set , erection and installation of lailless unit , received back material of 10 and 16 kva tf , received back material of 100 kva tf , received back material of lt ab cable

State Government

CTN :45427476

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

State Government

CTN :45427480

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to jsv by prov. 11/0.4 kv, 25 kva dtr at bohal khalsa a/w 11 kv ht line in electrical section bharoli under esd hpsebl no-i jawalamukhi ed jawalamukhi - supply part of 11 kv ht line with aaac 7/3.81 (0.692 km), steel tubular poles 10 mtr. long, steel tubular poles 9 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), safety & maintenance equipment for line maintenance, ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

State Government

CTN :45427482

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to improvement and augmentation of lis bharoli phase-ii 1 no. tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl no-i jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.080 km), steel tubular poles 10 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), x-arm ci 100x50x6 mm, length 2800 mm x 2 nos for incommer line, x-arm ci 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch, go switch handle supporting ci 75x40x5 mm, length 460 mm, go ab switch unit (11kv, 400a, 25 ka) tripple pole o/d type, do fuse unit, cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), forntech inverter with 2 battries (ups), ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, universal optical cable (for mri), aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

Drawer Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

State Government

State Government