Latest drawer guide Tenders | Government drawer guide Tenders

CTN :43275200

08 Jan, 2026 NA

Hazaribag - Jharkhand

Tender For procurement of hardware materials for 132/33kv gss, sariya under tsd, sariya.

Private Sector

CTN :43240903

25 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For rate contract for mutton, fish, frozen meat products , milk and milk products, cheese, butter, imported cheese vegetables (fresh and exotic), fruits, canned juices, canned food, groceries (permanent and (extra) flour, maida, rice and spices , dry fruits, sugar cubes, bakery items, bread, frozen vegetables mineral water , uniform material, coal, gel / fuel , clean films, disposable items, biodegradables, paper bags , industrial salt , housekeeping supplies, cleaning materials and other items stationery, computer stationery and computer printing stationery electrical, electronic, plumbing, paint, carpentry, hardware materials for banquets items for rent: audio visual, crockery, cutlery, lighting and others

Central Government/Public Sector

CTN :43257471

08 Jan, 2026 NA

Delhi - Delhi

Tender For auction sale of electric industrial, metallic, e-waste - online bids (e-bids) are invited for disposal of obsolete/unserviceable materials such as hardware, electrical, metal items on �as is where is condition basis� subject to the following terms and conditions, from the registered e-waste recyclers / re- processor under central pollution control board, govt. of india or with delhi pollution control board.

State Government

CTN :43204735

06 Jan, 2026 NA

Ranchi - Jharkhand

Tender For procurement of spare hardware materials for day to day maintenance work at 220/132kv grid sub-station, hatia-ii

Central Government/Public Sector

CTN :43221417

07 Jan, 2026 NA

Bokaro - Jharkhand

Tender For supply of backing materials of rubber cork sheet , wedges/hardware for tightening , hi-chrome liners for bbd4760

corporations/Associations/Others

CTN :42485358

24 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

24 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

State Government

CTN :43110072

26 Dec, 2025 10.00 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of hardware/ sanitary material and building materials, various units at ndvsu, adhartal, jablpur (3rd call) - supply of hardware/sanitory building material all item should be isi mark enclosed list, pvc pillar cock , pvc engle cock , brass short body bib tap faucet with wall flange water tap for bathroom, kitchen, wash basin, hot & cold water compatible, chrome finish( ) short body, tri water tap for bathroom | hold and cold mixer faucet | wash basin tap with water saving hidden aerator | strong brass construction, brasspillar cock , brass engle cock , stainless steel long body taps for bathroom and kitchen taps with chrome finish and quarter turn fitting ( ) long body, pvc long body bib tap with wall flange hot & cold water faucet for kitchen sink, bathroom & wash basin | durable, rust- free plastic tap for indoor use ( ) long body, pvc short body bib tap with wall flange hot & cold water faucet for kitchen sink, bathroom & wash basin | durable, rust-free plastic tap for indoor use ( ) short body, wash basin pipe (heavy ), connection pipe ( 1 feet ), connection pipe ( 2 feet ), upvc socket - , upvc t bend - , upvc brass l bow - , upvc brass socket - , upvc brass t bend - , upvc l bow - 1 , upvc socket - 1 , upvc t bend 1 , upvc brass l bow - 1 , upvc plan l bow - , upvc brass l bow - 1 , upvc 1 y reducer, upvc brass socket - 1 , upvc plan l bow - 1 inch, upvc brass t bend 1 , upvc brass l bow - 2 , upvc brass socket - 2 , cpvc brass l bow - , cpvc brass socket - , cpvc l bow - 1 , cpvc brass l bow - 1 , cpvc brass socket - 1 , cpvc brass t bend 1 , cpvc brass l bow - 2 , cpvc brass socket - 2 , cpvc brass t bend 2 , g.i. nozzle - 1 , g.i. nipple - 1 , g.i. stopper - 1 , g.i. - t - , g.i. l bow - , g.i. nipple - , g.i. socket - , tapelone, solvent upvc 100gms. box, gate valve brass - , section clamp 3 , section clamp 2 , upvc pipe 1 , upvc pipe1inch, upvc pipe1.5inch, upvc pipe 2 , taparia 500 gms ball pein hammer with handle, pipe pana - 300mm, pipe pana - 600mm, pach pana - 300mm, pechcus - screw driver ( four head ), brass f.t. upvc , brass f.t. upvc 1 , brass m.t. upvc , brass m.t. upvc 1 , cement, brick fly ash 50kg/cm2, bricks open bhatta 25kg/cm2, steel nails - 2 , steel nails - 3 , nittle screws - , nittle screws - 1 , nittle screws 1 , nittle screws , nittle screws 2 , emulsion interior -, painting brush - 2 , painting brush - 3 , painting brush - 4 , painting brush - 6 , putty jk / birla, putty jk / birla, steel fly proof mesh, teak wood beat - , teak wood beat - 1 , teak wood beat - 1 , teak wood beat - 1 , teak wood beat - 2 , ply water proof - 8mm, ply water proof - 10mm, ply water proof - 12mm, ply water proof - 18mm, steel hinges butt - x 3 , steel hinges butt - 1 x 4 , tower bolt steel - 6 , tower bolt steel - 10 , godrej door lock medium size, almira lock, upvc l bow - , cpvc l bow - , cpvc socket - , cpvc t bend - , cpvc socket - 1 , cpvc t bend 1 , g.i. hose collar, floor jali - steel 4 , hexa blade, hammer bit - 6mm, upvc pipe , upvc pipe 1 , cpvc pipe , cpvc pipe 1 , cpvc pipe 1 , cpvc pipe 2 , patti pana - ( nub. 5 to 16 nub. ), ring pana - ( nub. 5 to 16 nub. ), steel nails - 1 , emulsion exterior -, marble - powder, lime - un ., l drop steel - 10 , l drop steel - 12 , tower bolt steel - 8 , steal paint, primer iron, primer wooden, sistan set, health fuset 1 meter, jet spray 1 meter, brass plier cook, brass pliers cook high neck, concealed wall brass inch, universal tool kit with bag/box complete set (plumber), bubble level, metric adjustable tap die inch, tap die inch, tap die 1 inch, tap die 1.5 inch, tap die 2 inch, tap die 2.5 inch, tap die 3 inch, hdpe roll pipe isi 1 inch, hdpe roll pipe isi 1.5 inch, hdpe roll pipe isi 2 inch, hdpe roll pipe isi 2.5 inch, hdpe roll pipe isi 3 inch, hdpe roll pipe isi 4 inch, pcn tell 2 y 2.5 inch, spn 2 inch, horse collar 1inch, horse collar 1.5inch, horse collar 2inch, horse collar 2.5inch, horse collar 3 inch, horse collar 4inch, g.i.

State Government

CTN :43114664

29 Dec, 2025 NA

Ranchi - Jharkhand

Tender For procurement of spare hardware materials for day to day maintenance work at 220/132kv grid sub-station, hatia-ii

Central Government / Public Sector

CTN :43098285

28 Dec, 2025 58.40 Lacs

Howrah - West Bengal

Tender For set up of lecture recording studio - equipments as per nit, sitc of camera, sitc of ptz camera ceiling mount system, sitc of hd 8-channel digital video switcher, sitc of video streaming encoder, sitc of recorder, sitc of up down cross converter, sitc of 75 intarective display with ops kit, sitc of full hd ips 24" interactive pen display unit, sitc of 16" (40.64cm) 10-point touch screen monitor, sitc of 50 inch, uh display with wall mount kit, sitc of 32 inch, uh display, sitc of 24 inch, full hd 1920 x 1080,ips panel, sitc of multiplatfrom vc iniciater enginin, sitc of desktop system for editing, sitc of abobe cc all apps education subcription for 3 yrs subscription, sitc of hdmi to usb 3 capture device, sitc of 12 channel audio mixer, sitc of 4.5 " compact desktop reference monitor, sitc of earphone, sitc of all in one digital wireless lavalier microphone, sitc of all in one digital wireless handheld microphone, sitc of dynamic vocal microphonestand, sitc of dynamic vocal microphonestand, sitc of das storage, 8-bay hardware raid enclosure, sitc of 160w led soft studio light, sitc of 4 leaf barndoor, sitc of 80w led soft studio light, sitc of 80w led soft studio light, sitc of accessories for all the lighting fixtures, sitc of lighting grid or ceiling mount, 1024 mini dmx 512 stage lighting controller, sitc of power control system, sitc of digital dimming system, sitc of wiring of studio, sitc of 3 in 1 motorized background support system with croma screen for croma set, sitc of 3 in 1 motorized background support system with croma screen for croma set, sitc of 18u full loaded 600x800 rack with pdu, installation materials, system integration, commissioning, operation & maintenance training, part a- supply of vrf equipment, supply of inverter type variable refrigerant flow system - a . 5 hp side discharge, supply of variable refrigerant flow type indoor unit, supply of four way cassette ac - 1.5 tr, supply of hi wall split ac - 1.0 tr, refjoints, cordless controller, part b- supply of low side items & installation, testing & commissioning of the vrf system, nstallation, testing and commissioning of the above vrf outdoor units ..5 hp side discharge, installation, testing and commissioning of the above vrf indoor units .hi wall split ac - 1.0 tr, installation, testing and commissioning of the above vrf indoor units four way cassette ac - 1.5 tr, supply, installation, testing and commissioning of cu. refrigerant pipes (requried as per oem design) duly insulated with 19mm / 13mm close cell elastometric nitrite rubber insulation between each set of outdoor and indoor units (vrf), supply, installation, testing and commissioning of pvc pipe medium class (for drainage of water from idu) with 6 mm thick nitrile rubber insulation., supply & laying of cu conductor scheilded flexible communication cabling between odu and idu as per oem specification (vrf). cable shall be laying through hard pvc conduit pipe, ms structure, supply & filling of first charge of refrigerant r410a, lifting & shifting charges, scaffolding charges, training cost (for a period of six months)

Drawer Guide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors