Latest drawing service Tenders | Government drawing service Tenders

State Government

CTN :45372978

18 Jun, 2026 19.56 Lacs

Raichur - Karnataka

Tender For corrigendum : consultancy charges for preparation of architectural plans & elevations, structural designs, drawings and detailed project report for proposed construction of cable stayed bridge connecting tank bund road with shashi mahal talkies road & petla burz road in aam talab in raichur city. in raichur taluka, raichur district. under fund for the year 2026-27.

corporations/Associations/Others

CTN :45529262

12 Jun, 2026 NA

Jamui - Bihar

Tender For rfp - selection of consultant for preparation of dpr with comprehensive architectural drawings (with coordination of mep design), need based rectification in drawings / supervision work etc. for the second phase of center of excellence in jamui (sonpe) ,bihar is to be developed incorporating provisions based on the functional requirements of sports department are given below:-guest house, recovery swimming pool, synthetic hockey ground.

corporations/Associations/Others

CTN :45529259

12 Jun, 2026 NA

Champaran - Bihar

Tender For rfp - selection of consultant for preparation of dpr with comprehensive architectural drawings (with coordination of mep design), need based rectification in drawings / supervision work etc. for the second phase of center of excellence in west champaran (bettiah),bihar is to be developed incorporating provisions based on the functional requirements of sports department are given below:-archery ground, natural football field, secondary block for archery ground and football field etc.

corporations/Associations/Others

CTN :45529261

12 Jun, 2026 NA

Multi City - Bihar

Tender For rfp - selection of consultant for preparation of dpr with comprehensive architectural drawings (with coordination of mep design), need based rectification in drawings / supervision work etc. for the second phase of center of excellence in beldaur, khagaria, bihar is to be developed incorporating provisions based on the functional requirements of sports department are given below:- swimming pool academy.e.g. ? olympic size pool (25m x 50m) diving pool (25m x 25m practice pool (25m x 15m) kids pool etc.

CTN :45177223

18 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of i supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16401 , ii drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16401 , iii obs for cool and cold room for yard 16401 , iv service of engineers for installation of material for yard 16401 , v warranty extension charges for yard 16401 , vi services of training for yard 16401 , vii supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16402 , viii drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16402 , ix obs for cool and cold room for yard 16402 , x service of engineers for installation of material for yard 16402 , xi warranty extension charges for yard 16402 , xii services of training for yard 16402 , xiii supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16403 , xiv drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16403 , xv obs for cool and cold room for yard 16403 , xvi service of engineers for installation of material for yard 16403 , xvii warranty extension charges for yard 16403 , xviii services of training for yard 16403 , xix supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16404 , xx drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16404 , xxi obs for cool and cold room for yard 16404 , xxii service of engineers for installation of material for yard 16404 , xxiii warranty extension charges for yard 16404 , xxiv services of training for yard 16404 , xxv supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16405 , xxvi drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16405 , xxvii obs for cool and cold room for yard 16405 , xxviii service of engineers for installation of material for yard 16405 , xxix warranty extension charges for yard 16405 , xxx services of training for yard 16405 , xxxi supply of equipment for modular cool and cold room of ngopv as per tsp for yard 16406 , xxxii drawings and documents for modular cool and cold room of ngopv as per tsp for yard 16406 , xxxiii obs for cool and cold room for yard 16406 , xxxiv service of engineers for installation of material for yard 16406 , xxxv warranty extension charges for yard 16406 , xxxvi services of training for yard 16406

CTN :45528024

03 Jul, 2026 NA

Thiruvarur - Tamil Nadu

Tender For supply of holder to drg no. 303-43(as per drawings and specifications)

CTN :45226850

07 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply of end wall complete for amrit bharat ac coaches (without primer). drg. no. 828-1-5-001 col. i alt. nil note: a) drawing number: aaa51072 to be read as mvmc15013 alt. nil. b) dpt (dye penetration test) of end wall to be performed at firm's premise by tpi. c) primer shall be applied on the console only for drawing number: aaa15249 & aaa15250 d) in drawings "mig welding (131) is to be read as tig welding (141)" as per rcf design letter no md46231 dated 16.03.2024. packing instruction: mcf pi187 ver .0. [ warranty period: 84 months after the date of delivery ] ]

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45553087

23 Jun, 2026 13.99 Lacs

Pathanamthitta - Kerala

Tender For work name :ridf xxvii- providing and installing furnitures at smart krishibhavan in mezhuveli in pathanamthitta district (retender) - basement floor- ecoshop,seedling storage and bio pharmacy, visitors chair 3 seater - perforated sheet visitors chair - ss-godrej/featherlite / equivalent quality class, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 2.5 x2.5x0.60, powdercoated steel shelf for keeping seeds, etc.., supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., sliding mesh:- by using good quality powder coated aluminium channel steel mesh , with all fitting accessories , of size - 280x60cm, storage cupboard:-bottom storage cupboard with door by using good quality multiwood / plywood with mica finish, ss handle, of size - 300x60x75cm, wall fan, ground floor- office and waiting area, visitors chair 3 seater - perforated sheet visitors chair - ss, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, computer table - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back-godrej/featherlite / equivalent quality class, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 300 x60x75cm, supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., wall fan, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 4.0x3.60, l type table: - by using good quality marine plywood with mica laminate finish and inside laminate finish, drawer and cupboard , telescopic channel for drawers, auto hinges for cupboard, steel handle etc complete of table of size -180x75x75cm and side table of size - 100x40x75cm, printer table: - by using good quality marine plywood with mica laminate finish complete size -100x60x75 cm, first floor- conference &training hall, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 8x4.3, conference hall paneling:- wall panneling :- providing and placing a wall paneling on wall with decorative front view as per design and drawings using good quality 9mm/12mm marine plywood, supporting 16mm ply, with decorative lamination and all accessories etc completed .of size -2x8x2.1, dias stage:- providing and placing dias stage on conference hall, as per design and drawings using good quality marine ply wood including all fitting accessories etc. comple

CTN :45441646

19 Jun, 2026 97.25 Lacs

Madhugiri - Karnataka

Tender For corrigendum : collection of all necessary data, preparation of detailed report on hydrology, establishing the control points to carrying out detailed topographical survey, identification of material for hearting and casing from borrow areas, providing detailed geological reports consisiting of trail pits, trail bores and permanent benchmarks, demarcation of frl contour on ground with rcc boundary pillars, general arrangement drawing, detailed designs, drawings, estimates, detailed project report, package estimate, draft tender papers and land acquisition proposal including r & r work for the proposed vaderahalli reservoir & allied works with required structures to draw water from vaderahalli to lakkenahalli balancing reservoir or to intake fore bay of kolar package-1 pump house etc (detailed specification as in the detailed estimate)

Drawing Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others