Latest dressing mirror Tenders | Government dressing mirror Tenders

CTN :40136633

29 May, 2025 NA

Jamnagar - Gujarat

Tender For bid to ras supply of convex mirror (road safety) (q3)

CTN :40141352

28 May, 2025 NA

East Sikkim - Sikkim

Tender For bid to ras supply of road furniture - solar delinator solar edge indicator size 1200 mmas per irc 67 2022 technical details of solar guide posts made of mild steel of 75 76 od and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.the guide post shall have 8 red leds on equalivant gap total 48leds for brighter viewing of the motorists in fog. the leds shall start blinking as it gets dim. the solar delineator shall have solar panel on top of the surface for recharging. further it should have 2 strips of 150mm each of type xi sheeting specifications as per irc 67 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time also. , delinators size 1200mm as per irc 67 2022 roadway indicators as guide poles guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be concealed so that there should not be any exposed surface without powder coating the posts shall have an ellipsoidal design with the height of the pole shall be 900 mm above the ground with about 300mm base which can be anchored onto the ground as per irc 79 2019 mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves as per fig 1 of irc 79 2019 , delinators size 900 1000 mm as per irc 67 2022 roadway indicators as guide poles. guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts shall have an ellipsoidal design with the height of the pole shall be 800 mm above the ground with about 200mm base which can be anchored onto the ground as per irc 79 2019. mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time. to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting. the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves. as per fig 1 of irc 79 2019 , retroreflective tape 2 inch red 45 mtrs per roll , retroreflective tape 2inch yellow 45 mtrs per roll , retroreflective tape 2inch green 45 mtrs per roll , retroreflective tape 2 inch white 45 mtrs per roll , convex mirror size 40 inch or higher mirror thickness 05 mm or higher with mild steel pipe fittings length 98 inch dia 5 inch post suitable for convex morror mounting. , speed limit 40 kmph caution sign board of size 600 mm as per irc 67 2022 , speed limit 30 kmph caution sign board of size 600 mm as per irc 67 2022 , u turn prohibited caution sign board of size 600 mm as per irc 67 2022 , give way caution sign board of size 600 mm as per irc 67 2022 , stop caution sign board of size 600 mm as per irc 67 2022 , falling rocks caution sign board of size 600 mm as per irc 67 2022 , overtaking pro

CTN :40348517

29 May, 2025 1.06 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : supply of inverted mirror trolley mounted under vehicle search mirror convex security mirrors (v2) (q4)

CTN :40481668

14 Jun, 2025 NA

Solan - Himachal Pradesh

Tender For supply of convex mirror (road safety) (q3)

Central Government/Public Sector

CTN :40467256

30 May, 2025 NA

Mumbai - Maharashtra

Tender For fixing of dressing mirror gents map and hat stand with mirror in newly constructed building ie jhelum building (80 x offrs md accn ) and dressing mirror gents map in 224 newly constr offrs single cabins under ge(nw) nofra, colaba

Central Government/Public Sector

CTN :40238453

02 Jun, 2025 50.00 Lacs

Belgaum - Karnataka

Tender For corrigendum : renewal/ replacement of ber furniture under ge belgaum - part -i (wooden furniture), chair dining (fd-279), chair easy (fd-229), hat stand with mirro (fd-233), dressing mirror gents (fd/e6/map/16), peg table (fd-277), side board (fd-371), stool dressing with cushion (fd/e6/map/14), sofa set 5 seater with cushioned ( 3+1+1) (fd/map-ii/02), table computer (fd/e6/map/03), table wooden (600x600x760mm) (fd-293), table bedside (fd/e6/map/15r), table centre (fd-274), table dining 6 person(fd/map-ii/03), table dining 8 person (fd/map-ii/03), table dressing ladies incl stool (fd/e6/map-ii /07), teapoy (fd-382), bath mat pvc (fd/e6/map/07), pad lock godrej 50mm (tp), receptacle pvc (fd/e6/map/13)

Central Government/Public Sector

CTN :40201368

29 May, 2025 5.80 Lacs

Subansiri - Arunachal Pradesh

Tender For corrigendum : provn of furniture for new raising of stn hq at borarupak mil stn under ge 872 ews - almirah large (steel) ( drg no. fd-1031), almirah small (steel) (drg no. fd-1032), almirah large (steel) hanging, shelving (drg no. fd-e6/map/18), charpoy with hard top with mnf set (drg no. fd-e6/map/01), chair writing (drg no. fd-280), locker steel (drg no. fd-1029), rack adjustable 06 tiers steel (drg no. fd-1038), table 900x900x760mm (steel) (drg no. fd-1009), bed hard steel (drg no. fd-e6/map/08r), book case steel (drg no. fd-1028), sofa single seater (drg no. fd-map-ii/02), table bed side (drg no. fd/e6/map/15r), table centre two tier (drg no. fd-274), table writing (drg no. fd-275), dressing mirror (gents) (drg no. fd-e6/map/16), chair executive full back (make: godrej, model no. la sede (company code 1130) or equivalent of make of methadox/neelkamal (drg no. tp), hat stand with mirror (large) (drg no. fd-362), table office clerk (steel) (drg no. fd-1004), drugget of variety no woolen, 60 tex x 12 wrap, size 4000x4000mm (drg no. tp), side rack with tray four space (steel) ( drg no. fd-1023), sofa set 5 seater (3+1+1) (drg no. fd-281), table office officer (steel) (drg no. fd-1003), peg set of three (drg no. fd-253), chair cb steel with arm (drg no. fd-75(m)), peg set of six (drg no. fd-80(m)), board notice (drg no. fd-1(m)), table conference (drg no. fd-287), chair computer (revolving) (drg no. fd-/e6/map/01)

CTN :40450554

13 Jun, 2025 NA

Fazilka - Punjab

Tender For supply of inverted mirror trolley mounted under vehicle search mirror convex security mirrors (v2),spike barrier (v2)

CTN :40422750

05 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of expendables in department of physics, iit (bhu) varanasi - supply of bi-convex lens for focal length 100 mm with mount, supply of bi-convex lens for focal length 150 mm with mount, supply of bi-convex lens for focal length 200 mm with mount, supply of bi-convex lens for focal length 250 mm with mount, supply of bi-convex lens for focal length 500 mm with mount, supply of polarizing beam splitter with mount size: 25.4 x 25.4 x 25.4 mm, supply of polarizing beam splitter with mount size: 50.8 x 50.8 x 50.8 mm, supply of 50:50 non-polarizing beam splitter with mount size 25.4 x 25.4 x 25.4 mm, supply of 50:50 non-polarizing beam splitter with mount size 50.8 x 50.8 x 50.8 mm, supply of protected aluminum mirror of size 1 with mount, supply of protected aluminum mirror of size 2 with mount, supply of achromatic half-wave plate of size 1 with mount, supply of achromatic quarter-wave plate of size 1 with mount, supply of linear film polarizer with mount, supply of neutral density filter kits with mount, supply of microscope objective with mount, supply of special filter system, supply of special filter system (free space fiber coupler), supply of pinhole (5 m, 10m, 15m), supply of infinity-corrected tube lens with mount, supply of post, supply of post holder, supply of base plate, supply of top end right clamp, supply of right angle post clamp, supply of table clamp, supply of shc screws (matric socket cap screws), supply of metric set screw, supply of allen key ball end kit, supply of step index multimode fiber, supply of cosine correctors for cct, supply of fiber adapter, supply of post-mountable ferrule clamps, supply of polarization maintaining fiber, supply of single mode fiber launcher, supply of mounted microlens arrays with mount, supply of post collar, supply of right angle prism with mount,

CTN :40428221

11 Jun, 2025 NA

Bathinda - Punjab

Tender For supply of almirah large steel , bin linen multipurpose , bath mat pvc , chair dining , chair verandah pvc seat and back , chair writing , chair easy , form without back , hat stand with mirror , receptacle pvc , table writing , table centre , table dining 6 person , dressing mirror gents , table without drawer steel , table dining eight person , table office clerk steel , table peg , bed hard with ply top , side board

Dressing Mirror Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector