Latest drift eliminator Tenders | Government drift eliminator Tenders

Central Government/Public Sector

CTN :45338454

06 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of battery charging unit cum pre-cooling transformer 200 ampere input 415 volt 3 phase 50 hz. output 130 volt dc as per rcf spec no.edts-041 rev-b. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45343198

02 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap contain ferrous, copper, aluminum and pvc consisting, (1) rotary switch all size (16,63a etc), qty- 23 nos, (2) contactor all size (16,32a etc), qty- 30 nos, (3) led light fitting 18w/9w, qty-118 nos,(4) led light fitting b1, qty-110 nos, (5) led tube 9w, qty- 293 nos, (6) pcb for bldc fan 400 mm sweep, qty- 68 nos, (7) tail lamp fitting 110v, qty-07 nos, (8) return air filter 680 mm x 415mm, qty- 70 nos, (9) ac filters all size fresh & return air 620mmx 460 mm & 550mmx 500mm , qty-70 nos, (10) fresh air filters 480mm x 260mm, qty-120 nos (11) compressor scroll r22/r 407, qty- 20 nos, (12) led driver 9w & 18 w, qty-213 nos, (13) mcb & mpcb all size (6,16,32,63a etc). qty- 122 nos, (14) voltmeter 1000v/750v, qty-58 nos, (15) mmr 1000v, qty- 69 nos, (16) electronic thermostat 2-5 w, qty- 04 nos, (17) bldc fan 110 v dc, qty-170 nos (18) rmpu unit 7tr, qty- 02 nos, (19) mini pantry (hot case, 500w), qty- 16 nos, (20) mini pantry (deep freezer,25 ltr), qty- 16 nos, (21) condenser fan blade 21 inch/24 inch, qty-13 nos, (22) feeder contactor for lhb 1000a, qty- 03 nos,(23) contactor 200amp all, qty-22 nos, (24) regulated battery charger 6.5 kw, qty- 01 nos, (25) refrigerator 240/310 ltr, qty- 05 nos, (26) emergency battery charger 2.5 kw, qty-20 nos, (27) control transformer 100va 750v, qty- 40 nos, (28) control transformer 200va, qty- 19 nos, (29) control transformer 400va, qty-04 nos, (30) control transformer 300va, qty- 01 nos, (31) rc filter 415v, qty-24 nos, (32) control led driver pcb, qty-10 nos, (33) uic coupler 13 pin, qty- 43 nos, (34) heater unit complete, qty- 03 nos, (35) d.m plant, qty- 02 nos, (36) alternator 25 kw, qty-02 nos, (37) erru 25 kw, qty-02 nos, (38) 25 kva inverter, qty- 02 nos, (39) spare contactor coil 250v500 ac/dc, qty- 03 nos, (40) capillary 5 way, qty- 01 nos, (41) cfl 4 pin, qty- 50 nos, (42) deep freezer, 100/200 ltr, qty-01 nos, (43) condenser motor 3 ph 415v, qty- 10 nos, (44) mono block pump 3 ph 415v, qty-10 nos, (45) cooling coil lhb, qty-04 nos, (46) condenser coil lhb, qty-04 nos, (47) contactor k44 200a, qty-33 nos, total qty-11720 kg(11.720mt), location- coaching depot indore. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-ac-tl-indb, fdp-50 days. note- original e-waste certificate cum passbook will be required at the time of delivery.

Central Government/Public Sector

CTN :45329483

17 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti

State Government

CTN :45341515

09 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of repair and maintenance of cooling tower louvers and splash bar along with supply of rcc splash bars spares for cross flow cooling tower at 210mw, cstps, chandrapur during unit -3 coh.

State Government

CTN :45314107

17 Jun, 2026 27.41 Crore

Udhampur - Jammu And Kashmir

Tender For complete restoration work of chep-i and accessories” (4 no. machines i.e unit-i, ii, iii & unit-iv) of 23.3 mw (5x4.66mw) chenani hep, jkspdc, generation division udhampur, j&k ut involving all the works related to runner, miv, turbines with allied components including control and protection panels, instrumentation, hydro-mechanical works, lubrication system, hpu ,cooling system and specifically restoration of synchronous generators with its auxiliaries as envisaged in the detailed scope of work

CTN :45324777

08 Jun, 2026 18.00 Lacs

Jhalrapatan - Rajasthan

Tender For condition assessment of rcc structures of cooling tower unit-1, kalisindh thermal power project, jhalawar.

CTN :45329082

03 Jun, 2026 18.13 Lacs

Chhabra - Rajasthan

Tender For requirement of spare part of paharpur make cooling tower gear box, model 1512-12(18 at) unit# 1and 2 and 1513-12(20 at) unit# 3 and 4, stage-i, phase-i and ii, ctpp, chhabra - set of matched spiral bevel gears with pinion shaft oil singer, lock nuts washer, key and place bolts ( kit grdr32.2c gear set bevel 14.54), set of matched helical gears with inter- stage shaft, disc, place bolts and lower fan shaft key, (kit grdr 32.2 2d gear set hel 14.54), vibration trip switch type mmr-2x part no. p87-3059-1 for original cooling tower model 1512-12(18at)

CTN :45339064

29 May, 2026 2.00 Lacs

Ganganagar - Rajasthan

Tender For inspection work of cooling tower model no.-84248- 15c-20b, unit 1, stps suratgarh for renovation and up gradation stps suratgarh.

CTN :45321592

08 Jun, 2026 18.00 Lacs

Kota - Rajasthan

Tender For work contract of condition assessment of rcc structures of cooling tower unit-1, kalisindh thermal power project, jhalawar

CTN :45328829

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for cnc lab in mechanical department - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter

Drift Eliminator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government