Latest drill hiring Tenders | Government drill hiring Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45586027

08 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of the items stipulated in the bill of materials with specified specifications. - bosh - electrical drill and hammer drill with bit set, hammer drill concrete - bosch, key hole saw with complete set -4 (1"-6,2"-6,3"-6,4"--6) drill bit k4-6, k10-6), breathing apparatus set with spare cylinder, tent 180 with accessories, inflatable rescue boat with accessories -40hp obm, hydraulic jack 20 tons with ram set matching foot pump, life buoy, angle cutter 14", replacement diamond tipped blade for angle cutter 14"- 350mm, safety goggles, heavy duty working gloves, recipro cutting saw blade, recipro cutting saw blade(152mm), recipro cutting saw blade (130mm), extension cord reel (8mm,100mtr), working lamp with 50mtr lead(with 100w bulp), water tank 500 ltr, mega phone, led search light, led torch light with accessories (multi function), led head light, fire extinguisher portable, rope 10.5mm, 50mtrs, rope nylon 100 mtrs, carabiners, feet extension ladder (30 ft), heavy iron racks, hand saw (18"*410mm), hack saw frame 12" with blade, bolt cutter 30" (750mm), bolt cutter 14" (356.6mm), full body harness, rescue kit bag with accessories, multi purpose iron tool box empty, axe mate kit, rope manila, mfr box, sledge hammer (7kg), sledge hammer (10kg), fire axe, trolley for fiber boat - steel trolley, level 12" (spirit level 12" taparia), screw driver set (5-types), carpenter hammer 3", claw hammer (220gm,8 ozs), brick hammer, long knife, axe, digging iron bar 5.5 feet, crow bar 6 feet, crow bar 3 feet, phawda spade, spade shovels 12" * 10", hoe with wooden handle, pick mattock, bond, pliers 8" (210mm), vise grip 10" plier, chisel for concrete 1", chisel for concrete 1/2, safety helmet, gorund sheet (10*10), stainless steel mug 1 ltr, reflective jacket water proof, handy camera with accessories sony - (hdrcx 9.2mp hd), binocular day vision - olympus, binocular night vision - nikon, honda portable generator 3 kva, multifunction tower light with diesel generator set with trolly, honda submerged pump high -2.9kw discharge 2hp(hose - 25 mtr - 1,cable - 100mtr -1), floating pump 1 hp, chain saw (hitachi 18"), floatable fiber boat with obm (yamaha or equivalent), edelrid bud (royal), edelrid pure straihgt carabiner, edelrid hms magnum screw carabiner, edelrid joker harness, edelrid solid full body harness, edelrid power loc expert sp cord 8mm - 100mtr, edelrid performance 10mm - 100 mtr rope, edelrid performance 12mm - 100 mtr rope, edelrid parrot rope 16 mm - 100 mtr, rockport slithering mitten, figure of eight, anthron double stop decender plus, climbing ascender, rescue helmet, colaman woodsman chair, life jacket, edelrid easy pulley, petzl track transport pulley, seil marine raincoats, rock climbing rope

CTN :45448172

18 Jun, 2026 4.50 Lacs

Bankura - West Bengal

Tender For bid to ras supply of 1080 000017 equipment camouflage net pin iron mk-i , 8340 000487 pin iron for tent 254 mm , 5110 000561 axes pick head , 5110 001210 handle powrah wooden , 5110 000461 handles axes pick head straight 915 mm , 5110 000447 handle axes felling 815 mm , 6260 000007 lamp incandescent hand medium 200 cd , 5110 000540 pick digging head 3 kg chisel wide po , 5120 003630 shovel hand and handle , 7920 000057 handle bamboo , 5120 423117 uc 4 6 men set slab wooden

CTN :45578404

26 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For supply of potato peeler manual ss , parat small stainless steel with lid , padlocks ig 4 levers 50 mm , can oil 4 point 5 ltrs , pressure cooker 12 ltr complete , pressure cooker 22 ltr complete , ecsg 75 mm dark brown , ecsg 50mm mb green , ecsg 50 mm grass green , ecsg 50 mm undyed , ecsg 75 mm undyed , tumbler stainless steel 600 ml , cooker oil blow lamp burner , handles axes felling 815 mm , pick digging head 3 kg chisel wide and po , bucket canvas mk 6 without lid for , net camouflage head dress og mk 2 , container soap plastic , shirts cotton white for cooks size 3 , shorts kneaders s1 , trousers drill white bleached s4a

CTN :45252350

12 Jun, 2026 5.72 Lacs

Cachar - Assam

Tender For bid to ras supply of h1 a 8010 000288 putty carpaters , k5 5110 001286 dah mk-iii , b1 1005 557944 pullthrough 5 56mm 1a nylon , y3 6135 000009 battery dry 1.5v no.6 , j1 5110 000540 pick digging head 3 kg chisel wide po , k3 7210 000022 napkine table textile officer 500mm sqr

State Government

CTN :45488463

15 Jun, 2026 33.20 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii horticulture zone.nhp residential colony at naraina vihar.sub head supply of good earth, jamuna sand, , neem oil cake, plants digging of holes, renovation of lawn etc. at site. (model park)

State Government

CTN :45488473

15 Jun, 2026 33.26 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii horticulture zone.m/o distt. park at kirti nagar( dr. hedgewar park).. sub head-supply of plants, neem oil cake, earth work, digging of holes, renovation of lawn etc. at site. (model park)

State Government

CTN :45488480

15 Jun, 2026 41.66 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii horticulture zone. nhp at hari nagar near ddu hospital (udham singh park). sub head - supply of good earth, jamunasand,digging of holes, neem oil cake, jcb, plants, etc. at site. (model park)

State Government

CTN :45488482

15 Jun, 2026 32.93 Lacs

Delhi - Delhi

Tender For completed scheme under na-ii/horticulture zone community park at bakkarwala (lok nayak puram). sub head- digging of holes, supply of neem oil cake, plants etc., at site for compensatory plantation

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Drill Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

State Government