Latest drill shank Tenders | Government drill shank Tenders

State Government

CTN :40074236

05 May, 2025 13.80 Lacs

Datia - Madhya Pradesh

Tender For drilling of 400x200 mm dia 60 mtr. depth g.p. t.w. by rotary drilling machine in different villages at distt. datia

State Government

CTN :40074237

05 May, 2025 13.80 Lacs

Datia - Madhya Pradesh

Tender For drilling of 400x200 mm dia 60 mtr. depth g.p. t.w. by rotary drilling machine in different villages at distt. datia

State Government

CTN :40074238

05 May, 2025 13.80 Lacs

Datia - Madhya Pradesh

Tender For drilling of 400x200 mm dia 60 mtr. depth g.p. t.w. by rotary drilling machine in different villages at distt. datia

CTN :39038241

01 May, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

State Government

CTN :39898671

29 Apr, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage - tm- procurement of various t and p materials p electrode drying oven, capacity:5kg, model: arc-3101 (or) equivalent make: arcon (or) esab (or) ador fontech , screw extractor set, size:m3 to m25, spiral flute structure, left hand cobalt drill bits:16 nos multispline cobalt screw extractors : 13 nos spiral flute cobalt screw extractors: 6 nos model: exd35(or) equivalent along with carrying case make:snap-on (or) bosch (or) taberia , rotary hammer drilling machine with sds plus, hand operated, make:bosch model:gbh 4-32 dfr professional in carrying case with auxiliary handle along with one set of drill bits 6- 32mm (concrete) , 18v cordless impact wrench, model: gds 250li (or) equivalent make:bosch (or) hikoki (or) dewalt , impact wrench, 1"square drive along with 4 nos inlet bushing and 2 sets of throttle valve kit. model:cp-6920-d24, type: pneumatic make:chicago pneumatic ultimate torque: 2600 nm including all accessories , hand torque multiplier, range: max input:540 nm, max output: 2700 nm with offset and straight reaction arms range:max input:540 nm, max output:2700 nm accuracy: 4% output square:1" input square:3/4" multiplication ratio:5:1 weight:3.7kg reaction type: bar and cranked make: snap-on (or) bosch (or) mekaster , die set for outer threading; type: metric m6-m24 coarse and m6-m24 fine . material: hss; no of dies: 20; die sizes: coarse: m6 x 1.00, m8 x 1.25, m10 x 1.50, m12 x 1.75, m14 x 2.00, m16 ? 2.00,, ?18 x 2.50,, m20 x 2.50, m22 x 2.50, m24 x 3.00 fine: m6 x 0.75, m8 x 1.00, m10 x 1.25, m12 x 1.50, m14 x 1.50, m16 x 1.50, m18 x 1.50, m20 x 1.50, m22 x 1.50, m24 x 1.50, with die holder and the adaptor; material: hss , allen key, black finish 32 mm heavy duty material: make: taparia (or) snap-on (or) chromium vanadium steel dewalt (or) bosch torque wrench, 12-68nm,1/2" sq. drive make:taparia (or) mekaster (or) mac master , torque wrench, 135-675 nm,3/4" sq. drive make:taparia (or) mekaster (or) mac master , socket bit adapter,sq.drive, 1" (f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter,sq.drive, 1" (f) to 1/2"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive,3/4"(f) to 1"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive, 1/2"(f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m55x3/4"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m70x1"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch

CTN :39319149

23 Apr, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of cnc machine tools - exchangeable drill shank dcn 150-075-20a-5d , exchangeable drill head ihp 155 ic 948 , exchangeable drill head ihp fcp155 ic 908 , turning tool holder rh ddjnr 2525m-11 , turning tool holder lh ddjnr 2525m-11 , turning inserts dnmg 110 408-m3p ic 807 , turning inserts dnmg 110404-nfic-907 , turning inserts dnmg 110404- f3m-ic 6025 , boring bar a16m scl cl 09 , boring bar e16r scl cl 09

CTN :39321057

23 Apr, 2025 1.93 Lacs

Bangalore - Karnataka

Tender For bid to ras supply of cnc machine tools - exchangeable drill shank dcn 150-075-20a-5d , exchangeable drill shank ihp 155 ic 948 , exchangeable drill head fcp 155 ic 908 , exchangeable drill shank dcn 100-030-16a-3d , exchangeable drill shank dcn 100-050- 16a-5d , exchangeable drill head ihp 100 ic 948 , exchangeable drill shank d3n -150 075-20a 5d , exchangeable drill shank dcn -10d 03d-16a 3d

State Government

CTN :39855018

25 Apr, 2025 27.48 Lacs

Burdwan - West Bengal

Tender For corrigendum : supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as

CTN :40013359

05 May, 2025 10.43 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of pre fabricated store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , fire extinguisher of capacity 6 kgs along with its accessories confirming to is 13849 two nos with each shelter , lightning conductor will be provided as under and stores are as per appx f , manufactured sand m sand conforming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , bricks common burnt clay building bricks sub class b modular , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m , ms clamp made of ms flat 40 x 4 mm 200mm long bent in l shape with two holes , pvc ceiling rose 2 obliq 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated and pvc seathed 1.5 sqmm single core with copper conductor suitable upto 1100 v conforming to is 694 1990 , modular switch one way 6 amps one module conforming to is 3854 1966. , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , ms screw 25 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10.00mtr long isi marked , mcb single pole 230v ac 50 hz 6 amps 10ka conforming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to is 8623, , residual current circuit breaker with overload and short circuit protection double pole 32 amps , modular socket 6a 2 obliq 3 pin combined 2 module , white cover plate with frame 2 module , white cover plate with frame 4 module , metal flush box 2 module , metal flush box 4 module , pvc casing caping pipe 25mm x16mm conforming to is 14927 part ii , pvc casing caping l bend 25mm conforming to is 371 1979 , pvc casing caping elbow 25mm dia conforming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4 inch x 4 inch , drilling machine bosch gbh 2 26 re sds plus 2 mode rotary hammer drill 800 watts 26mm electrically driven. make bosch. , sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , aluminum straight edge 50mm square 2mm thick 1800 mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tasla iron 18 , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 , screw driver 12 inch with insulated plastic handle , hacksaw frame with 2 blade , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , hand gloves insulated with rubber , tape measuring metallic 30m , mason trowel karchi , axes picks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 10 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , spanner adjustable 12 inch

Central Government/Public Sector

CTN :39970914

29 Apr, 2025 NA

Bathinda - Punjab

Tender For supply of battery operated rotary hammer drill st machine complete with battery pack (02nos), charger, hammer drill bit (4 cutting edge made of tungsten carbide) 10mm 12mm and 16 mm, narrow flat and pointed chiesel single impact energy 2.6j, 1050 rpm, hammer drilling range 4mm to 28mm, optimum drilling range 6mm to 18mm, weight of tool must be less than 3kg, active torque control (atc), inbuilt active vibration reduction (avr), chiseling, chipping, depth gauge, removable chuck, reverse mode, torque clutch, triaxial vibration value for hammer drilling into concrete must be less than 11 (m/s2), triaxial vibration for chiseling in concrete must be less than 6(m/s2), 1st battery 22 (v) 8amp, weight less than 1.5kg, 2nd battery 22 (v)-4amp, weight less than 1.0kg, battery working range minus()17 degree to 60 degree, state of charge display, upgraded durability and battery monitoring ac??? built-in battery health tester, sealed electronics, shock absorbers and reinforced housing to better protect against jobsite conditions, battery charger i/p 230v, o/p power 240, o/p current 9.6amp, state of charge display. , supply of electrically operated concrete breaker with self sharpening chisels (four numbers). 02 nos 36 cm narrow flat chisels, 01 no 36 cm pointed chisel and 01 no 50 cm narrow flat chisel. the tool shall be of the following specification i.e impact energy 35j, impact frequency 1800, vibration to body less than 5m/s2, weight of concrete breaker tool must be less than 15kg, power i/p approximate 2.1kw, brushless motor, detachable supply cord, three lubricating chambers inside machine

Drill Shank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector