Latest drill socket Tenders | Government drill socket Tenders

Central Government/Public Sector

CTN :45733150

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45716641

13 Jul, 2026 4.42 Lacs

Gajraula - Uttar Pradesh

Tender For supply of hs tool bit , grinding wheel , tube expender , cotton waste , p p rope , welding plain , c i wheel valve , steel wire rope , carbide strip , m s long bend , solenoid valve , polyster patta , seamless pipe , ring spener , drill socket , revolvig center , aligtor , completegas cutter set , forged steel , ms stud , old dhoti , wire brush

Central Government/Public Sector

CTN :45702009

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45647222

30 Jun, 2026 7.00 Lacs

Sonipat - Haryana

Tender For purchase of tube cleaning equipments of ffes evaporators and pan etc. - purchase of tube cleaning equipment s of ffe s evaporators and pan etc., flexible shaft 16 mtr for ffe(make s.j industries, manacles, scaleaway, power flex)2965, foundry brush(make s.j industries, manacles, scaleaway, power flex)1980, hand piece flex shaft19mm (make s.j industries, manacles, scaleaway, power flex)5205, shaft flexible 7.5 mtr long (length of one no. shaft 7.5 mtr) (make s.j industries, manacles, scaleaway, power flex)1890, sphere beeds 42 mm (make s.j industries, manacles, scaleaway, power flex)1896, sphere pin 42 mm(make s.j industries, manacles, scaleaway, power flex)1897, spring 42 mm(make s.j industries, manacles, scaleaway, power flex)1898, t.h.cutter35.6mm for ffe(make s.j industries, manacles, scaleaway, power flex)5206, tool head cutter 42mm(make s.j industries, manacles, scaleaway, power flex)1892, tool head cutter 98mm (make s.j industries, manacles, scaleaway, power flex)1895, turck head brush 35.6mm for ffe(make s.j industrier, manacles, scaleaway, po wer flex)5209, turk head brush 42/43mm (make s.j industries, manacles, scaleaway, power flex)1971, turk head brush 98/102mm (make s.j industries, manacles, scaleaway, power flex)1974, evaporator tube expender suitable for id 42.6 mm(manacles, scaleaway, power flex make)1463, ffe tube expender suitable for id 35.6 mm(make s.j industries, manacles, scaleaway, power flex)1525

Central Government/Public Sector

CTN :45591733

25 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubbles including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubbles, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubbles by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Central Government And Public Sector

CTN :45591734

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: back side of 132 kva electric tower no. 02, north-south 42 feet along 20 feet kacchi road and east-west 52 feet.

Central Government And Public Sector

CTN :45591735

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: in front of oxygen plant 32 feet east-west along pcc road and north-south 80 feet.

Central Government And Public Sector

CTN :45591736

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: in north of melt shop from 170 feet from pcc road, east-west 65 feet and north-south 85 feet along 40 feet kacchi road.

Central Government/Public Sector

CTN :45571752

29 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned unserviceable old, broken and various types of tools, released from tool room section, consisting of flat files, half-round files, round files, pipe wrench (18"), ratchet handle (3/4"), combination pliers, hexa frame, crimping pliers (magar type), circlip pliers (eastman), cable cutter, long nose pliers, torque wrench 1/2" (200 nm, chicago), torque wrench 1/2" (60?340 nm, chicago), torque wrench 1/2" (10?100 nm), torque wrench 1/2" (10?68 nm), measuring tape (5 mtr), double end spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 14x15 mm, 16x17 mm, 18x19 mm, 20x22 mm, 21x23 mm, 24x26 mm, 25x28 mm, 27x32 mm, 30x32 mm, 36x41 mm and 41x46 mm), single end spanners (36 mm, 41 mm, 46 mm and 50 mm), ring spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 14x15 mm, 16x17 mm, 18x19 mm, 20x22 mm, 21x23 mm, 24x26 mm, 25x28 mm, 30x32 mm and 36x41 mm), tubular spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 16x17 mm, 20x22 mm and 36x41 mm), tap handles (10", 12" and 18"), allen keys (5 mm, 6 mm, 8 mm, 10 mm, 14 mm and 17 mm), allen key sockets (6 mm, 8 mm and 10 mm), hand tap sets (12 mm and 20 mm), socket wrenches 1/2" drive (13 mm, 14 mm, 16 mm, 17 mm, 18 mm, 20 mm, 22 mm, 23 mm, 24 mm, 27 mm and 34 mm), socket wrenches 3/4" drive (24 mm, 27 mm, 30 mm, 36 mm, 38 mm and 41 mm), distance pieces (3/4" x 400 mm, 3/4" x 200 mm and 1/2" x 3"), t-handle (3/4"), t-handle (1/2"), ratchet handle (1/2"), and drill sockets (1?2 mm, 2?3 mm and 4?5 mm), in broken and unserviceable condition, released from tool room section.

CTN :45523073

27 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of cleaning equipment - extra heavy duty flexible shaft with double round inner core made from best quality spring steel provided with heavy gauge outer casing manufacturing from hot dip galvanized steel strips having high tensile coil antifriction lining inside the full length of outer casing complete with guards couplings and hand piece having double ball bearing and oil seal. a) 16 mm. x 8 meter. isi/iso standard., b) 16 mm. x 10 meter. isi/iso standard., c) 16 mm. x 12 meter. isi/iso standard., d) 16 mm. x 16 meter. isi/iso standard., e) 19 mm. x 8 meters. isi/iso standard., f) 19 mm. x 10 meters. isi/iso standard., g) 19 mm. x 12 meters. isi/iso standard., h) 19 mm. x 15 meters. isi/iso standard., i) 19 mm. x 20 meters. isi/iso standard., j) 19 mm. x 25 meters. isi/iso standard., spare inner core for above size: 16 mm. dia isi/iso standard., do - size: 19 mm. dia isi/iso standard., t.e. type tool head with 15 cutter (12 straight & 3 leading bevel cutter)made from best selected quality steel e.n.8-31/09 material duly hardened and tempered for longer service for use with flexible shaft having b.s.w. thread. isi/iso standard. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. with 3 cutter. isi/iso standard., spare straight cutter for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare straight cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare beveled cutter for 39 mm.,42 mm. & 47 mm. isi/iso standard., spare beveled cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare long pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinge/rivet pins for above. isi/iso standard., spare washer for above. isi/iso standard., skato skto motor 5 h.p. complete with variable speed pulley to give final r.p.m. 2900 mounted on trolley with suitable starter to work on electric supply, 3 phase, 50 cycle., truck head brush made from best quality hardened & tempered round speed spring steel wire no. 26/28 swg for use with flexible shaft having 1/2 bsw threads. socket size 1 . a) 39 mm. isi/iso standard., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. socket size 1,1/4 , 30 wire gauge. isi/iso standard., end scrapper made from carbon steel of best quality. isi/iso standard. a) 39 mm., b) 42 mm., c) 47 mm., d) 98 mm., double spiral brushes made from best quality genuine hardened and tempered round spring wire no. 28/29 swg. and twisted with 8 swg. m.s. annealed wire from mechanical cleaning of tubes. the brush having overall length of about 5 and is provided with bsw threads. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. isi/iso standard., foundry brush 6 x 2 without handle. isi/iso standard., foundry brush 6 x 2 with handle. isi/iso standard., b.t. type tool head cutter with 3 cutters made from best quality steel material duly hardened and tempered for longer service for use with flexible shaft having bsw threads. isi/iso standard. a) 82.88 mm., b) 82.50 mm. isi/iso standard., c) 76.20 mm. isi/iso standard., d) 70.00 mm. isi/iso standard., e) 63.50 mm. isi/iso standard., f) 52.80 mm. isi/iso standard., g) 48.00 mm. isi/iso standard., h) 50.00 mm. isi/iso standard., turck head brush for tube socket size 1,1/4 . isi/iso standard. a) 82.5 mm., b) 76.5 mm. isi/iso standard., c) 70.0 mm. isi/iso standard., d) 63.5 mm. isi/iso standard., spare straight cutter for b.t. type cutter. isi/iso standard., spare bevel cutter for above. isi/iso standard., spare pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinges pins for above. isi/iso standard., hand piece with double ball bearing suitable for. isi/iso standard. a) 16 mm., b) 19 mm. isi/iso standard., complete nipple for connecting motor with shaft.(inner core nipple). isi/iso standard., motor end coupling for 16 mm. & 19 mm. inner core. isi/iso standard., complete nipple for connecting

Drill Socket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector