Latest drill twist Tenders | Government drill twist Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government / Public Sector

CTN :45736535

21 Jul, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of rail drilling machine as per rdso specification (no.tm/sm/3dt. 19.11.1992) first revision, 2020 or latest if any [ warranty period: 12 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45698601

03 Jul, 2026 NA

Mahbubnagar - Tamil Nadu

Tender For supply of 22 mm dia hss parallel shank twist drill (stub series) conforming to is: 5100 (1969), suitable for drilling rail holes for fish plates & joints, without drill twist sockets. make: lalit hardware stores or similar. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

Central Government / Public Sector

CTN :45436251

03 Jul, 2026 NA

Mahbubnagar - Tamil Nadu

Tender For corrigendum : supply of 22 mm dia hss parallel shank twist drill (stub series) conforming to is: 5100 (1969), suitable for drilling rail holes for fish plates & joints, without drill twist sockets. make: lalit hardware stores or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45652536

09 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of rail hole drilling machine as per rdso specification no tm/sm/3 dt. 19.11.1992 first revision 2020 ]

CTN :45652359

29 Jun, 2026 NA

Malda - West Bengal

Tender For hss special rail track drill bit suitable to work with bds/ojasvi make special drill adaptor with allen screv locking system that can be fitted with bds/ojasvi mak rail track drilling machine model railmab 965/mg36specifications:1. dia: 7.1 mm.2. lockingallen screw. make: ojasvi or similar.

CTN :45652757

29 Jun, 2026 NA

Malda - West Bengal

Tender For supply of compact & portable petroldriven rail drill machine, drillingcapacity 6 to 36 mm dia, 36 mmcutting depth capacity automatic selfcentring special rail clamp adaptor, extra large coolant tank. suitable for52 kg, 60 kg tounge rail. point \machine base plate. weight: approx15 kg w/o attachment. macine size(min-max): hxlxw: 160x70x110mm -470x535x345 mm, track time: drilling-45 sec, clamping-10 sec declamping-10 sec. make: ojasvi, rotacut or similar.

CTN :45656780

09 Jul, 2026 17.86 Lacs

Banaskantha - Gujarat

Tender For supply of spindle key , hammer sledge double faced , multiangle magnetic clamp set metal base , auto darkening welding helmet , magnetic particle testing kit , water cooled induction welding brazing machine , plastic welding machine , swaging and flooring tool kit , laboratory type induction coil , rcc pole with accessories , magnetic flux meter , tachometer analog type , single phase variable auto transformer , ac starters f star delta starter soft starter for a c motors of , domestic appliances e table fan , dc power supply , current transformer , potential transformer , single phase transformer, core type , pillar electric drill machine motorized 12-20 mm capacity , manual motor coil winding machine with step arbor , primary current injection set , wiring board , different types of engine bearing models , different types of piston model , d. immersion heater , h. washing machine semi-automatic , i. motor pump set , battery charger , digital wattmeter , digital energymeter , digital ac ammeter , digital voltmeter , 2 point starter , universal motor , 1 phase capacitor motor , dol starter , resistance types starter , auto transformer type starter , current transformer , dc ammeter , dc voltmeter , thimble , tailors square , scissors , leg shaper wooden , blanket for padding of pressing table , pattern punch , pattern notcher , pattern hanging stand , zigzag multi purpose machine , bar tack machine with low back rest , feed off the arm double needle , dummy lady, men, kid different sizes , drill twist taper shank , file flat second cut safe edge , scraper flat , scraper triangular , scraper half round , chisel cold round nose , different profile gauges plate type , knurling tool , pipe bender machine spool type with stand manually operated //bid details 2 / 55

CTN :45609224

08 Jul, 2026 NA

Patdi - Gujarat

Tender For supply of cut section model for pneumatic components with work station , drill gauges letter drill gauge , power tools for fastening capacity 10-18 , hand reamer set nominal dia. 6, 8, 10, 12, 16mm , surface roughness comparison plates n1 - n12 grade , anvil 50 kgs with stand , injector , ring groove cleaner , valve spring compressor universal , glow plug tester , drill point angle gauge , stethoscope engineering , arbor press hand operated 2 ton capacity , drill twist 1.5 mm to 15 mm by 0.5 mm , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition brake drum , working model of power showing parts like door , cut section models of shock absorbers , cut section of cross ply and radial tyres , coll winding machines with counting meter , dynamo of automobile engine 24 v. d.c * /bid number : gem/2026/b/7672214 + /dated: 18-06-2026 ' ' / bid document 1 / 26

Drill Twist Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector