Latest drilling pipe Tenders | Government drilling pipe Tenders

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

CTN :40108669

02 May, 2025 90.00 Lacs

Sirohi - Rajasthan

Tender For construction of works related to construction of 150mm dia of tubewell with submerciable pump with accessorises by dth drilling with long casing and commission materials for in all respect in ps aburoad region (distt sirohi) with defect liability pe

State Government

CTN :40059761

07 May, 2025 1.30 Crore

Mahisagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kadana under taluka panchayat, kadana under mgnrega (annual unit rate)-, 53 grade isi opc cement, , crushed stone aggregate for hard quality 10 mm to 20 mm size, , crushed stone aggregate for hard quality 40 mm to 63 mm size, , screened gravel 10 mm size, , screened gravel 12 mm size, , unscreened gravel, , coarse sand, , fine sand, , rubble, , murrum/ binding material, , t.m.t. bars fe-415, , stone dust, , white cement, , distemper primer, , bricks aggregate 40 mm size, , hysd bar, , hand broken stone aggregate 40 mm size to 63 mm size, , binding wires, , bitumen washer, , g.i. j or l hooks., , g. i. plain washer, , enamel paint, , enamel primer, , door shutters decorative type 35 mm thick both sides teak finished., , marble slab polished granite stone 20 to 25mm thick blacs, , flat back wash basin white vitrious china 450mm x 300 mm size, , urinal stall type half size, , r.c.c. heavy duty non-pressure pipe l.s.class np2-900 mm dia., , r.c.c. heavy duty non-pressure pipe 1.s.class np2-600 mm dia., , pvc water tank, , upvc sch 40 for cold water 15 mm dia. (1/2"), , upvc sch 40 for cold water 25 mm dia. (1"), , upvc sch 40 for cold water 40mm dia (1.1/2"), , p.v.c. pipes 10 kgf/sq.cm 110 mm dia., , p.v.c. pipes 10kgf/sq.cm 50 mm dia, , 5 waste pipe for wash basin c.p. 32mm dia., , 7 structual steel m.s. channel, joints, tee, gusset plate ete., , vitrified granite tiles 8 mm to 10 mm thick 24" x 24" size dark shade, , 9 white vitrious china w.c. sqatting pan (indian type), , -0 white vitrious china 'p' or 's' trap, , 11, , white vitrious ching wash down w.c. (european), , 42 m.s angel, , 43 vitrified granite tiles 8 mm to 10 mm thick 24" x24" size light shade, , 44, , m.s. sheet 1 mm thick, , 45, , pillar tap 15 mm dia., , 46, , polished kota stone slab green 25mm thick, , 47, , paver block m200 grade 60 mm thick, , 48, , common burnt clay bricks conventional size, , 49, , g. i. sheet 0.8 mm thick corrugated class-3, , 50, , galvanised mild steel tube medium grade 40 mm dia., , 51, , hire charges for road roller, , 52, , white lime (white washing), , 53, , r.c.c. heavy duty non-pressure pipe i.s.class np3-600 mm dia., , 54, , gun metal screw down bib tape 15 mm dia, , 55, , crushed stone aggregate 40mm size, , 56, , white glazed tiles 15 cm x 15 cm x 6 mm, , 57 ci or ms brackets, , 58, , brass screw down bib tape 15 mm dia, , 59, , white vitreous china sink 600mm x 450 mm x 150 mm, , 60, , brass screw down stop cock 25 mm dia, , 61, , ci cover with frame 455 mm x 610 mm, , 62, , water profing cement paint, , 63, , cement concret mixer, , 64, , drilling of 215 mm dia. bore in over burden strata including lowering and fixing of 175 mm, , , nominal dia upvc pipe up to required depth and further drilling of 165 mm dia bore hole in rocky strata by d111 ng, , manufacture, supply and delivery of isi marked upvc casing pipe (18-12818 )175 mm nominal dia "cs" type, , providing and supplying single phase borwell submersible pump motor set with control panel of 20 lpm, 110 mt head and 1.5 hp., , pvc insulated flat submersible cable as per detailed technical specifications of r/c of gwssb conforming to is 694, iec 60227 60228. 1 r x 30 x 4.0 mm, , manufacture, supply and delivery of following isi marked (is: 4984/1985 with latest amendment) having material grade pe-80 in requirement at site with ss-316 nipple at both end having 11 t?? threading dn-40, pn-10., , lowering of single phase submersible pump set complete with required length of hdpe pipe & cable in bore well and fitting up to 90mt depth, , electrification, , nails 50 mm long, , centering and shuttering, , water tanker 6 kl capicity,

State Government

CTN :39898671

29 Apr, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage - tm- procurement of various t and p materials p electrode drying oven, capacity:5kg, model: arc-3101 (or) equivalent make: arcon (or) esab (or) ador fontech , screw extractor set, size:m3 to m25, spiral flute structure, left hand cobalt drill bits:16 nos multispline cobalt screw extractors : 13 nos spiral flute cobalt screw extractors: 6 nos model: exd35(or) equivalent along with carrying case make:snap-on (or) bosch (or) taberia , rotary hammer drilling machine with sds plus, hand operated, make:bosch model:gbh 4-32 dfr professional in carrying case with auxiliary handle along with one set of drill bits 6- 32mm (concrete) , 18v cordless impact wrench, model: gds 250li (or) equivalent make:bosch (or) hikoki (or) dewalt , impact wrench, 1"square drive along with 4 nos inlet bushing and 2 sets of throttle valve kit. model:cp-6920-d24, type: pneumatic make:chicago pneumatic ultimate torque: 2600 nm including all accessories , hand torque multiplier, range: max input:540 nm, max output: 2700 nm with offset and straight reaction arms range:max input:540 nm, max output:2700 nm accuracy: 4% output square:1" input square:3/4" multiplication ratio:5:1 weight:3.7kg reaction type: bar and cranked make: snap-on (or) bosch (or) mekaster , die set for outer threading; type: metric m6-m24 coarse and m6-m24 fine . material: hss; no of dies: 20; die sizes: coarse: m6 x 1.00, m8 x 1.25, m10 x 1.50, m12 x 1.75, m14 x 2.00, m16 ? 2.00,, ?18 x 2.50,, m20 x 2.50, m22 x 2.50, m24 x 3.00 fine: m6 x 0.75, m8 x 1.00, m10 x 1.25, m12 x 1.50, m14 x 1.50, m16 x 1.50, m18 x 1.50, m20 x 1.50, m22 x 1.50, m24 x 1.50, with die holder and the adaptor; material: hss , allen key, black finish 32 mm heavy duty material: make: taparia (or) snap-on (or) chromium vanadium steel dewalt (or) bosch torque wrench, 12-68nm,1/2" sq. drive make:taparia (or) mekaster (or) mac master , torque wrench, 135-675 nm,3/4" sq. drive make:taparia (or) mekaster (or) mac master , socket bit adapter,sq.drive, 1" (f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter,sq.drive, 1" (f) to 1/2"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive,3/4"(f) to 1"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive, 1/2"(f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m55x3/4"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m70x1"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch

CTN :40039261

23 Apr, 2025 4.01 Lacs

Multi City - Telangana

Tender For drilling of 6 1/2 dia borewell and supply and transportation and installation of three phase motor and other materials for summer action plan in dornakal municipality

State Government

CTN :39955908

30 Apr, 2025 12.59 Lacs

Vadodara - Gujarat

Tender For drilling 200 mm dia up to 60 mtrs deep tube well by dr drilling rig with supply of various type of required bore materials in district vadodara under different programme

CTN :39922677

21 Apr, 2025 6.28 Lacs

Madanapalle - Andhra Pradesh

Tender For drilling of borewell and fixing of motors at jaha chenetha nagar with all materials in2nd ward madanapalle municipality

CTN :39922681

21 Apr, 2025 6.28 Lacs

Madanapalle - Andhra Pradesh

Tender For drilling of borewell and fixing of motors at chandra colony with all materials in2nd ward madanapalle municipality

CTN :39922683

21 Apr, 2025 6.28 Lacs

Madanapalle - Andhra Pradesh

Tender For drilling of borewell and fixing of motors at kanakadas nagar with all materials in 2nd ward madanapalle municipality

CTN :39922684

21 Apr, 2025 6.28 Lacs

Madanapalle - Andhra Pradesh

Tender For drilling of borewell and fixing of motors at l-3 layout with all materials in 2nd ward madanapalle municipality

Drilling Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government