Latest drilling rig Tenders | Government drilling rig Tenders

State Government

CTN :41491748

02 Sep, 2025 5.86 Lacs

Gwalior - Madhya Pradesh

Tender For supply of spare parts for special repair and maintenance for related bec-n-20 rig machine in district morena (as per bill of quantity). - description, bucher valve 120 ltr, dennison pump 4512, smkt relief valve, hydraulic filter, pulley bearing, pulley oil seal, valve adapter and elbow, hydraulic hauze pipe, bec pouch, bec gait block, mast plate, guide rod change, gear box output shaft, input shaft, yock, bearing 22211, bearing 6311, main gear, 18 mm rope wire 41 mtr, 18 mm rope wire 26mtr, drilling rod changer (winch motor), danfoss 400 seal kit, level jack seal kit, mrc kit, mrc cylinder kit, muc motor kit, microfeed (autofeed), elgi servo cylinder (booster), coupling rubber, bearing shell, upper engine gasket set-855, gasket op (old p/n 178788), seal ring, gasket, screw, o ring injector 101754, coolant add. conc. 5ltrs., fuel filter kit with ring stand, element lo & o ring, elem. slo by pass & ring, seal o ring, kit air cleaner element (855 bc), piston, piston ringset, liner sleeve, clutch plates assembly complete (including clutch plates, pressure plates, etc.), wire rope pulley shaft complete work opening & fitting, drilling head complete work opening & fitting, engine overhauling including head sleeve work opening & fitting, labour charge of drilling rig hydraulic parts complete opening & fitting, labour charge of cummins engine parts change complete opening & fitting, labour charge of engine overhauling including head sleeve work opening & fitting, labour charge of clutch plates assembly opening & fitting complete

State Government

CTN :41425158

28 Aug, 2025 13.50 Lacs

Ahmedabad - Gujarat

Tender For providing the drilling operational staff including 02 nos driller, 02 nos pump operator, 02 nos site karkoon & 10 nos labours to operate 02 nos of departmental drilling rigs at different drilling site in gujarat under control of drilling sub division (r&b), ahmedabad for the year of 2025-26

Central Government/Public Sector

CTN :41447689

26 Aug, 2025 NA

Ranchi - Jharkhand

Tender For providing of motor insurance service - truck mounted drilling rigs; 5759 cc

Central Government/Public Sector

CTN :41381856

25 Aug, 2025 11.00 Crore

Ernakulam - Kerala

Tender For custom bid for services - habitability package for jur sagar kiran; 1 5.1 wooden panel flooring, 2 5.1.1, 1)supply &replacement of wooden panel flooring for jr. & sr., recreation room, executive room, auditorium, t/p room, radio room,, control room, engg. office & t/p office.specification: wooden plank (2 m, x 305 mm x 75 mm thk), type of wood: balau timber, sq.ft. 2600, 3 5.2 flooring, 4, 5.2.1, 1)supply &replacement of vinyl flooring for a,b,c,o decks,including, messes and staircase with teak wood running skirting 150mm width,6mm, thick on all room walls,stair cases,offices,control rooms and scr room., specification:thickness of 2mm or more,fire resistant,non slippery,, washable,wooden finish., 2)quantity is indicative and will be finally calculated based on the, damages assessed at the time of dry dock., 3)as a turnkey job, bidder to carryout all associated job including renewal, of damaged deck composotion., make:armstrong/hanwa/flora or as approved by ongc., sq.ft. 15000, 5, 4) material to be approved by ongc., 5) primary deck covering should be of approved material which will not, give rise to toxic or explosive hazards elevated temperatures*. (refer to, imo res. a.687(17) - fire test procedures for ignitability of primary deck, coverings), 6 5.3 lining panels 'c' class, 7 5.3.1, 1) supply & replacement of abs approved (solas) lining panels (12, mm thick) for a, b, c, 0, decks, including canteen and staircase, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc., 4). material to get approval from ongc., sq.ft. 15000, 8 5.3.1, glass wool insulation should be of 4 inches thickness (high density, block), fire resistant and suitable for accommodation ceilings of drilling, rigs., sq.ft. 15000, 9 6.75 remove & refit of sensors & bell router of fire alarm system from ceiling, panels of a,b,c,o decks of accomodation area nos 220, 10 6.61 remove & refit of paga system from ceiling panel of of a,b,c,o decks of, accomodation area nos 140, 11 5.4 partition / lining panels 'b' class, 12 5.4.1, 1) supply & replacement of abs approved partition / lining panels (22, mm.) at various locations of accommodation, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system. ., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc. 4). material to get approval from ongc., sq.ft. 15000, 13 5.4.1 glass wool insulation should be of 4 inches thickness high density block,, fire resistant and suitable for offshore drilling rigs. sq.ft. 15000, 14 5.5 shoe racks, 15 5.5.1, 1) supply of ready made shoe racks to be made in both 'a', and 'b', decks at exit points on port & starboard sides as per following:, a) shoe rack for 'b' deck: size 4' x 1-1/2' x 1-1/2', b) shoe rack for ''a' deck: size 6' x 1-1/2' x 1-1/2'., 2) makes: 1.guatier, 2. durian, 3. concepts, mumbai, 4. godrej or as, approved by ongc., set 2, 16 5.6 new flooring at freezer room & cooler room, 17, 5.6.1, 1) to provide new flooring for freezer room and cooler room with, thermal insulation to avoid heat loss including supply of materials as per, details given below:, a) room volume - 22.4 m3,, b) ceiling area - 12.4 m2, temp. -20c,, c) floor area - 12.4 m2,, d) sidewalls - 13 m2 x 12.8 m2 x10.7 m2x12.5 m2., e) rubber mats - 12 mm thick synthetic rubber, 2) supply and fixing of anti-skid floor tiles in both the rooms., (makes nitco, johnson, spartek, sonora, kajaria), 3) supply and fixing of thermal insulation including materials for all side, walls and ceilings of both the rooms as per drg. no. 770/

Corporations And Associations And Others

CTN :41433830

01 Sep, 2025 22.09 Lacs

Panchkula - Haryana

Tender For boring and installation of one no. deep bore twell deep below ground level in village bhudanpur near ia ph i panchkula with percussion cum rotary drilling rig of any other method of latest technology for augmentation of water supply in village budhan

State Government

CTN :41371660

21 Aug, 2025 39.47 Lacs

Banaskantha - Gujarat

Tender For drilling of 200mm/250mm dia tube wells up to or above 300 meters (total 6 numbers) depth by d r drilling rig in different villages of tharad, vav & suigam taluka (group e) in banaskantha district including supply of various type of ms bore materials & slotting work of ms erw pipes.

CTN :41344559

12 Aug, 2025 NA

Rajouri - Jammu And Kashmir

Tender For the work constitutes supply of store of fd defences for arty gun pits including hiring of plants for required work at the delivery locations mentioned in rfp within 60 days - built-up steel section of size 300mm x 150mm x 4mtr length with min weight 46 kg per mtr with tolerance (-) 2% to (+)5% (total weight 184kg per piece), fabricated from is 2062 e250 grade structural steel, welded as per 816/ is 822, with continuous weld free from defects, dimensional tolerance as per is 7215, surface cleaned to sa 2.5 and one coat red oxide primer min 30 micron dft complete with all material test certificate, weight verification certificate, welding quality assurance report, dimensional inspection report. make: tata/rinl/sail/jindal/jsw or equivalent as approved., built-up steel section of size 200mm x 100mm x 9.4mtr length with min weight 24.2 kg per mtr with tolerance(-) 2% to (+)5% (total weight 227.48kg per piece), fabricated from is 2062 e250 grade structural steel, welded as per 816/ is 822, with continuous weld free from defects, dimensional tolerance as per is 7215, surface cleaned to sa 2.5 and one coat red oxide primer min 30 micron dft complete with all material test certificate, weight verification certificate, welding quality assurance report, dimensional inspection report. make: tata/rinl/sail/jindal/jsw or equivalent as approved., ismb 200x100mm x 8 m minimum weight 24.2kg/m with tolerance (-) 2% to (+)5% (total 193.6kg per piece) including two coats of synthetic enamel paint over a coat of red oxide primer. make: tata/rinl/sail/jindal or equivalent to is 808-1989, mild steel base plate, size 450mm x 450mm x 16mm thick, fabricated from is 2062 e250 grade structural steel, cut with cnc/gas cutting machine, edges free from notches and burs, with hole drilling (bolt holes) weight approximately 25.5 kg per plate, surface cleaned to sa 2.5 and one coat of primer applied (minimum 30 micron dft) supplied complete with mtc, dimensional and weight verification report proper making and safe transportation. make: tata/rinl/sail/jindal or equivalent to is 808-1989, mild steel top plate, size 300mm x 300mm x 12mm thick, fabricated from is 2062 e250 grade structural steel, cut with cnc/gas cutting machine, edges free from notches and burs, with hole drilling (bolt holes) weight approximately 8.5 kg per plate, surface cleaned to sa 2.5 and applied with one coat of primer (minimum 30 micron dft) supplied complete with material test certificate, dimensional and weight verification proper making and safe transportation. make: tata/rinl/sail/jindal or equivalent to is 808-1989, structural steel bracing members of size 26mm dia round bar x 2700mm length, fabricated from is 2062 e250 grade steel free from bends and defects, weight approx 11.3 kg per piece surface cleaned to sa 2.5 standard and applied with one coat of primer (min 30 micron dft) supplied complete with material test certificate, dimensional and weight verification reports. make: tata/rinl/sail/jindal or equivalent to is 808-1989, bracing support block sh8 of size 100mm x 100mm x 1.4mtr x 5mm thick, fabricated from is 2062 e250 grade steel, fully welded box section with continuous seam welding cut by cnc/gas cutting edges smooth and free from defects, weight approximately 21kg per piece, surface cleaned to sa 2.5 standard and coated with primer (minimum 30 micron dft) complete with material test certificate, dimensional verification and weight certificate, bracing cleat plates of size 150mm x150mm x 5mm thick, fabricate fabricated from is 2062 e250 grade steel, cut by cnc/gas cutting edges smooth and free from defects, weight approximately 0.88kg per piece, surface cleaned to sa 2.5 standard and coated with primer (minimum 30 micron dft) complete with material test certificate, dimensional verification and weight certificate, connection plate size 300mm x 300mm x 12mm thick, fabricated from is 2062 e250 grade steel, cut by cnc/gas cutting edges smooth and free from defects, weight

Central Government/Public Sector

CTN :41315355

25 Aug, 2025 NA

West Tripura - Tripura

Tender For providing of custom bid for services - hiring of services for servicing, repairing, testing, calibration and certification of pressure and temperature safety valves at 06 drilling rigs of ongc tripura asset for 03 years

State Government

CTN :41315956

11 Aug, 2025 NA

Jammu - Jammu And Kashmir

Tender For construction of 250 mm dia. production tube wells by any suitable method (reverse/direct/dual rotary) using mud-rotary drilling rig for 01 water supply scheme (01 no. tube well) of district jammu of jammu province under jal jeevan mission (jjm)

Central Government/Public Sector

CTN :41315221

25 Aug, 2025 NA

Mumbai - Maharashtra

Tender For charter hiring of 04 nos. 1000 hp (minimum) mobile drilling rigs (3 nos. for ahmedabad and 1 no. for mehsana asset) for a period of 03 years

Drilling Rig Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors