Get complete information related to latest Drive Axle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Drive Axle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Drive Axle Tenders.
Tender For manufacturing and supply of 1 in 12 cms crossing bg for 60 kg rails on psc sleepers layo ut to rdso drg. no.t-4220 alt-7 (latest alteration) complete with all fittings as listed in the drawing exclu ding fish plates, fish bolts, g.r.pads, metal liner, gfn liner, elastic rail clips and check rails as per irs/t -29 (revised-2024) latest alteration) for cast manganese steel crossing complete with relevant specificati ons for all parts. excluding other items indicated in the drawing. [ warranty period: 30 months after the date of delivery ]
Tender For fabrication and supply of 10125 mm o/r (curved) fan shaped switches 1 in 12 t/out for b g 60kg (uic) on psc sleepers to rdso drg. no. t-4219 alt.10 (with latest alt.) with supplier's rails, compl ete with stock rails and all parts including check rails as listed in the drawing but excluding grooved rub ber sole plates, insulating liners, elastic rail clips, plate screws, fish plates and fish bolts, as per specifica tion irs: t-10-2025 with latest alteration as amended up to the date of closing of tender. (the alt. in dra wing and specification issued by rdso up to tender closing date shall be applicable to this tender.). note : the responsibility to procure rails will solely lie with the manufacturer in terms of railway board letter n o. 2022/track- (p)/fabricators dated 24.01.2022 & dated 31.07.2023. [ warranty period: 30 months aft er the date of delivery ]
Tender For [goods, fabrication & supply of 6400 mm over riding derailing switches 1 in 8.5, t/out for bg (1673 mm) 60kg on psc sleepers to rdso drg. no. t-6068 alt.4 with latest alteration and conforming to specification no. irs: t-10-2025 with latest corrigendum issued up to the actual date of closing tender with suppliers rails complete with stock rails and all parts & fittings as listed in the drawing but excluding grooved rubber sole plates, insulating lines, elastic rail clips, plate screw, fish plates and fish bolts. n ote :- rails needed for fabrication of switch i.e. for stock rail and tongue rail shall be arranged by suppli er at their own cost in terms of railway board letter no. 2022/track-i(p)/fabricators dated 24.01.2022. sp ecification: irs/t-10-2025for fabricated switc [ warranty period: 30 months after the date of delivery ]
Tender For manufacturing and supply of overriding curved switches 60 kg 1 in 16 conforming to r dso drg. no. t-5692 with alt. 4, complete with all fittings as listed in the drawing excluding grooved r ubber sole plates, insulating liners, fish plates, fish bolts and nuts. elastic rail clips, plate screws etc . specification: irs specification: irs/t-10-2025. [ warranty period: 30 months after the date of deli very ]
Tender For custom bid for services - so for miscellaneous machining services-1 machining of exchg-channel upto 500 mm, 2 machining of exchg- channel cover - 501 , 3 machining of exchg- channel cover 1001 m, 4 machining of exchg upto 500 mm dia, 5 machining of exchg 501 mm to 1000 mm dia, 6 machining of exchg 1001 mm to 1500 mm di, 7 machining of exchg tube sheet along with, 8 machining of exchg tube sheet along with, 9 machining of exchg gasket face 1001 mm t, 10 machining of gasket seating slots (10 mm, 11 rolling services of plate into pipe, 12 bending of patch plate for welding jobs, 13 services: bending of exchanger cs tubes , 14 repairing services of bent column trays, 15 bending of alloy steel pipes up-to size:, 16 bending of cs pipes upto 4 inch x sch 80, 17 bending of boiler tubes upto 38.1mm x 60, 18 marking, drilling and fabrication of exc, 19 marking, drilling and fabrication of exc, 20 machining: turning on lathe, 21 machining services charges, 22 machining/shaping of anodes to size, 23 repair of damaged threads to studs & nut, 24 removal of broken bolts from holes, 25 machining: threading of holes with tappi, 26 machining of rtj groove on flanges, 27 services, demister cage resizing, 28 services, gasket face serration, 29 services, hexamesh rolling, 30 services, threading of pipes upto 1 1/2, 31 services, threading of pipes 2 inch and, 32 services: sectional/full replacement of , 33 fab and supply heater spigot pipe caps, 34 fabrication of exchanger tie rods, 35 fabrication of foundation bolts, 36 fab of exchanger fish plates / connectin, 37 fabrication of exchanger backing ring, 38 fab and supply of cs plug for od: 20/25 , 39 fab and supply of cs plug for od: 38.1 m, 40 fab and supply of cs taper plug for od:, 41 fab and supply brass taper plug for od: , 42 fab and supply of brass plug for od: 20/, 43 fab and supply ss plugs for tubes up to, 44 fab and supply ss plugs for tubes from 3, 45 fab and supply of ss 410 plug for od: 20, 46 fab and supply of as plug for od: 20/25, 47 fab and supply as plugs for tubes of 25, 48 fab and supply as plugs for tubes of 38, 49 fab and supply of ss 316 plugs for tubes, 50 fab and supply of ss 316 taper plug for , 51 fab and supply of duplex steel plugs od, 52 fab and supply of ss 310 plug for od:50 , 53 fab and supply of cs afc plugs, 54 fab and supply of 5 mm thk cs handles fo, 55 fab and supply of 10 mm thk. cs handles , 56 fabrication and supply of cs valve wheel, 57 fab and supply of ss 316 orifice plate o, 58 fab and supply of ss 316 orifice plate o, 59 fab and supply of ss 316 orifice plate o, 60 fab and supply of ss 316 orifice plate o, 61 fab and supply of brass ferrules for od-, 62 fab and supply of pvc ferrules for od- 2, 63 fab and supply of carbon steel ferrules , 64 fab and supply of foundation bolts size:, 65 eye bolt plugs for salt water exchangers, 66 fab and supply of 1/4 in flaring type br, 67 fab and supply of flaring type brass tee, 68 fan and supply of ss clamp of size m6/ m, 69 fab and supply of cs bush for the valves, 70 fab and supply of brass/bronze bush for , 71 fabrication and supply of ss poking rods, 72 fab and supply of lead washers for burne, 73 fab and supply copper ring gasket for he, 74 fabrication of ss f rods, 75 fab and supply of gauge glass body segme, 76 fab supply of deluge valve ss ball che, 77 fab and supply of cs exchanger backing r, 78 fab and supply of ss exchanger backing r, 79 fab and supply of cs strainer - up-to 2 , 80 fab and supply of cs strainer - for 3 to, 81 fab and supply of cs strainer - for 6 to, 82 fab and supply of cs strainer - for 10 t, 83 fab and supply of cs strainer for above , 84 fab and supply of ss 304 strainer for up, 85 fab and supply of ss 304 strainer for 3 , 86 fab and supply of ss 304 strainer for 6 , 87 fab and supply of ss 304 strainer for 10, 88 fab and supply of ss 304 strainer for ab, 89 reconditioning of strainer with mesh upt, 90 reconditioning of strainer with mesh abo, 91 fab and supply of strainer with p
Tender For manufacturing and supply of 6400 mm o/r (curved) fan shaped switches 1 in 8.5, t/out for bg (1673 mm) 60kg on psc sleepers to rdso drg. no. t-4966 (alt.7) with latest alteration and conforming to specification no. irs: t-10-2025 with latest corrigendum with suppliers rails complete with stock rails an d all parts and fittings as listed in the drawing including check rails but excluding grooved rubber sole pla tes, insulating liners, elastic rail clips, plate screw, fish plates and fish bolts. (the alteration in drawing a nd specification issued by rdso up to tender closing date shall be applicable to this tender.). [ warranty period: 30 months after the date of delivery ]
Tender For rate contract for manufacture and supply of cms crossing for bg 52kg(uic) on psc sleepers 1 i n 12, to rdso drg no.t-4734(alt-6), with latest alteration if any, amended upto date of tender notice, complet e set with all parts as listed in the drawing excluding fish plates, fish bolts and nuts, grsps, check rails, liner s and ercs(as per list attached as annexure 1a), as per specification irs: t-29 (revised-2024) with latest alter ation as amended upto the date of tender notice and conforming to str tdg 0021(version no.2.0), with latest alteration as amended upto date of tender notice. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For manufacture and supply of one meter long fish plates for 60 kg rails conforming to rdso dr g. no. t-5916. [ warranty period: 30 months after the date of delivery ]
Tender For fabrication and supply of 6400 mm over-riding derailing switches 60 kg 1 in 8.5 on psc sleepers as per rdso drawing no. t-6068 with alteration 4 and conforming to irs specification no. t-1 0-2025, (complete set) with latest revision/corrigendum/amendment complete with all parts listed in t he sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e - tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arra nged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings : as per sub assembly rdso drawing no. t-6068 with alteration 4 available on rdso website (complete set) with latest revision/corrigendum/amendment complete with all parts l isted in the sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, stand ard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of clo sing of e- tender. [ warranty period: 30 months after the date of delivery ]
Tender For supply of fish plate for 60 kg (uic) rails conforming to rdso drg no rdso/t-1898 with latest alt eration. each set of fish plate to rdso drg no rdso/t-1898 comprises of 2 nos of fish plates & 4 nos bolts & nuts to rdso drg no t-1899). specification: irs/t-1-2012 (prov) with corrigendum no 1 of dec 2021 with latest alterations.the term latest alterations" wherever used will mean the alteration up to t he actual date of opening of tender [ warranty period: 30 months after the date of delivery ]