Latest drive panel Tenders | Government drive panel Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45701779

09 Jul, 2026 NA

Rupnagar - Punjab

Tender For e.i. work/providing shed (foundations) for placing the ht/lt equipment for the work augmentation of electrical system at main pump house (replacement of main panel, starter panel with drive panel for smooth operation) in pu campus sector 14 chandigar

CTN :45438320

06 Jul, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

CTN :45717052

07 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of repair station for nsc rdr , electrostatic mat , shielded metal arc welding electrode , mild steel filler road 4mm x 450mm , ferrous metal repair electrode , flexible power transmission cable , flood light , copper conductor pvc insulated cable , modular power distribution panel

CTN :45710944

06 Jul, 2026 NA

Namakkal - Tamil Nadu

Tender For to carry out design supply erection and commissioning of micro processor based digital dc drive panel

Central Government/Public Sector

CTN :45376429

04 Jul, 2026 15.00 Lacs

Diglipur - Andaman And Nicobar Islands

Tender For corrigendum : provision of noise reduction paneling for motivation hall, operation room and 05 in nos air conditioner for admin offices and special repair of main distribution panel associated with power distribution at icgs mayabunder, under ge(s) diglipur.

State Government

CTN :45055935

15 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : supply of wagon tippler dc thyristor drive panel spares

Central Government/Public Sector

CTN :45698464

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply installation wiring & testing of programming controller variable frequency drive panel with powder coating siemens grey-7035 for mh-14 hp, ct-1.5 hp, lt-3hp, double speed for all motion with joystick with rrc master controller pendent operating with eot crane brake light arrangement along with dbr panel, along with protection switchgear consisting mcb of 6 amp, 18ka, sp/dp control transformer of 300va, 0-440-415-410/0-110 vac, relay with base, 3-ph line choke, dbr-2.75e,27.5kw break contactor along with suitable cables, terminations, etc. confirming to is 13408 or latest, supply for 5 ton eot crane at lower parel workshop. accepted make: yaskawa | siemens | schineder or equivalent [ warranty period: 30 months after the date of delivery ] ]

CTN :45690396

02 Jul, 2026 25.59 Lacs

Bhubaneswar - Odisha

Tender For annual maintenance contract of installed e&m equipments in central drug standard control organization, gothapatna, bhubaneswar for financial year 2026-27. - & minor repairs of cctv & including, & minor repairs of kone lift i/c, (standard deviation colour matching), (standard deviation colour matching), (t.c.). manufactures word mark/, (unified glare rating) < 19, flicker, / 6500°k (as per ansi bin), sdcm, /6500°k (as per ansi bin),sdcm, <3,, <5, maximum power consumption, >85%, input voltage: 140-270 volt ac,, >85%, operating voltage ac 140-270, >85%, operating voltage ac 140-270, >85%,thd < 10% as per iec 61000-, 1 2,22,718.00 job 2,22,718.00 mr, 1 no 13 passenger lift,, 1.5 sq. mm frls/hffr, pvc, 10% , p. f.≥0.95, ip20, cri ≥80, ugr, 10.1 18 watt 10 618.00 each 6,180.00 mr, 10322 with driver as per the, 11.1 36 watt 10 2,103.00 each 21,030.00 mr, 12 13,877.00 month 1,66,524.00 mr, 12 16,961.00 month 2,03,532.00 mr, 12 21,586.00 month 2,59,032.00 mr, 12 24,086.00 month 289032 mr, 12 24,128.00 month 2,89,536.00 mr, 12 31,890.00 month 382680 mr, 12 4,490.00 month 53,880.00 mr, 12 53,452.00 month 6,41,424.00 mr, 125 kva dg set with amf and, 15u rack 1 13,330.00 nos 13,330.00, 2 x 6 sockets 16a power distribution, 2.5 kv with short & open circuit, 3-2, p. f.≥0.95, ip-66,ik-10, cri >70,, 39.23.3, 4000°k/ 5700°k /6500°k (as per ansi, 61000-4-5, driver efficiency, 70% of initial lumen maintained till life, 70% of initial lumen maintained till life, 90°c)., 90°c)., above 90°c)., aluminium body including trim, aluminium body with driver as per the, and earthing etc. as required with, annual comprehensive maintenance, annual comprehensive, maintenance, annual comprehensive, maintenance, approved by engineer-in-charge as, approved by engineer-in-charge as, approved by engineer-in-charge as, as required, as required., at gothapatna as required, attached & following staff., basis as per terms & conditions, basis) including servicing, preventive, bin), sdcm (standard deviation, bis standard complete in all respect, bis standards and trade mark, body material with pmma and, cable and earthing etc. as required, cable and earthing etc. as required, cables, nvr, switch, cctv camera,, cct 3000°k / 4000°k / 5700°k, cdtl building etc. as reqd., centigrade, internal surge protection of, certificate (t.c.). manufactures word, circuitry) of minimum 50000 burning, colour matching) <3,, commissiong of pa, rectification and, comprehensive and repair, comprehensive and repair, comprehensive and repair, condition at cdtl office building etc, contract (as inspection on monthly, copper conductor single core cable, day electrical complaints, complaint, distribution pane, 250 kva substation,, down lighter (round/ square/, driver & electrical circuitry), of, dsr-25, efficacy ≥105 <120 lm/watt) supplying, ends , cct 3000°k / 4000°k / 5700°k, ends as per lm80 extrapolation ies, entire lift , etc in cdtl office building, etc in cdtl office at gothapatna as, extrapolation ies tm-21-11 report,, fixture shall be confirming to relevant, fixture shall be of relevant bis, fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., free, (flicker should be below 5 %), life, frequency 50/60 hz, operating temp, general shift) at cdsco on monthly, hours with70% of initial lumen, housing such that led, housing such that led junction, housing such that led junction, i/c external connections with 1.5, in all respect i/c external connections, inspection on monthly basis) including, inspection on monthly basis) including, insulated copper conductor single core, insulated copper conductor single core, internal surge protection of 2.5 kv with, ip surveillance systems i/c maintance, ip20, cri ≥80 , ugr (unified glare, junctiontemperature shall not rise, knocked-down condition (ckd) shape,, led panel light 2x2 ft. (system lumen, lenses for beam angle asper iesna, life time (led, driver &

Central Government/Public Sector

CTN :45417504

06 Jul, 2026 NA

East Singhbhum - Jharkhand

Tender For corrigendum : rate contract for spares for normet make - rate contract for spares for normet make, spacer flange part no 4570149, bushing part no 5051925, meter set complete part no 5124748, shelter plate part no 5613380, seal part no 5700467, magnetic plug part no 5728380, brake cam part no 5728992, hose assembly part no 6045630, hose assembly part no 6045640, hose assembly part no 6045660, hose assembly part no 6045690, hose assembly part no 6046860, pr. releif valve part no 10000283, inner scissor part no 15078270, base frame part no 15243570, side guide part no 15243580, jack part no 15246970, external scissor part no 15270317, meter kit part no 15876220, platform frame part no 16098380, widener part no 16098800, widener part no 16098810, flange part no 25131541, distributor block part no 31715063, guide part no 33091208, cylinder tube part no 33300971, exhaust purifier part no 35058429, axle part no 35071729, axle part no 35071737, axle part no 35071745, bearing housing part no 35071786, pin part no 35071869, stripe tape part no 35120427, bushing part no 35340280, lifting lug part no 35552010, pin part no 35562600, armour part no 35662630, gear shifter part no 35843460, gear shifter part no 35843750, frame joint part no 35994500, shelter plate part no 35995460, rubber mat part no 36059100, air cleaner part no 36094350, elbow part no 36094390, framing plate part no 36192420, framing plate part no 36192450, damper rubber part no 40590200, coupling part no 41211343, work light cover part no 41483223, framing part no 41483231, grid iron part no 41483272, roller part no 41555608, hose support part no 41575242, banjo bolt part no 41662552, hinge plate part no 41753526, pin part no 41753807, coupling part no 41777046, axle part no 41820416, spacer ring part no 41821380, fastener part no 41887951, hose support part no 41889601, rail pipe part no 41906702, hinge part no 41950437, seat (opt) part no 41952250, support part no 41954504, fastening screw part no 41956731, junction part no 41959875, piston part no 42842799, piston rod part no 43300946, charge valve assy. part no 45042200, extension pipe part no 45051570, flange part no 45071800, bearing housing part no 45071818, sliding part part no 45071842, pin part no 45071859, sliding part part no 45072170, bearing housing part no 45073608, flexible pipe part no 45100997, exhaust pipe part no 45137668, hinge part no 45155652, bearing plate part no 45170131, flange part no 45170149, tightening part no 45177177, groove sleeve part no 45178118, fastening plate part no 45249790, spacer ring part no 45271930, brake linkage part no 45319800, reduction fitting part no 45331540, rod part no 45363670, reduction fitting part no 45366250, extension shaft part no 45367100, adapter flange part no 45367110, junction part no 45431190, extension pipe part no 45435200, lug part no 45437070, pressure plate part no 45482150, plain bearing part no 45482190, coupling part no 45491400, pin part no 45497970, bolt part no 45497990, shelter plate part no 45498000, reduction fitting part no 45499330, intermediate flange part no 45513430, pin part no 45554240, pipe handle part no 45555480, fitting part no 45566220, seal part no 45567360, cover plate part no 45572480, support part no 45615110, shelter plate part no 45663500, stand part no 45668930, valve assy part no 45673610, brake valve part no 45675730, shuttle valve part no 45677350, fastener part no 45709100, mounting plate part no 45709110, fastening plate part no 45711200, propeller shaft cover part no 45716750, stand part no 45718710, fastener part no 45789870, handle part no 45813130, u-bracket part no 45844690, hydraulic throttle pedal part no 45882450, brake valve part no 45886440, magnetic valve fittings part no 45887140, ls-signal valve fittings part no 45888370, drivers panel part no 45924870, hinge part no 45933130, top holder part no 45952340, graphite seal part no 45970700, junction part no 45980780, pressure relief valve part no 45981870, pre

Drive Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector