Latest driving gear Tenders | Government driving gear Tenders

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Central Government And Public Sector

CTN :45675457

30 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot miscellaneous scrap - lot of scrap ferrous consisting of diesel piston, chain cutter,track machine parts,rr box,pully, liner, piston pin, bearing iron rod,bearing housing diesel loco piston part,cylinder head parts, bull gear of loco & c and w components and other machinery items etc. with or without minor and slightly nf/ steel and other attachment (p.l. no-98321523).

CTN :45633741

30 Jun, 2026 NA

Bardhaman - West Bengal

Tender For development/repair of spares for different pumps installed at 8 mgd pump house, 6 mgd pump house, raw water intake pump house -3 and clarifiers installed at water works.- rethreading/ trueness checking/reparing of shaft. , repairing/development/balancing of impellers., , development of distance sleeve/shaft sleeve., , development of impeller nut., , rectification/development of damaged keyway of pump shaft., , repairing of pump bearing housing., , repairing/development of spares of driving gear box of clarfiers.

Central Government/Public Sector

CTN :45637788

22 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - cast steel scrap consisting all type of hitachi tube/msu tube, pinion, all type of gear, bull gear etc of sort and sizes old used and us for railway use. mode of delivery by actual weight. fdp 40 days. material should be loaded with one end from lot as per description. only (01) one cutting allowed for easy loading.

CTN :45561767

13 Aug, 2026 NA

Delhi - Delhi

Tender For procurement of spares for mi-17v5 helicopter - rod, fairing, disk 1, disk 2, covering disk 1, pump drive gear, oil pump housing, nozzle guide vane1 stage, rotor with plungers, igv lever, spool, radial bearing, radial bearing, power supply module assy, cable assembly, shroud i, driving gear, po drive connection housing, fixture for lifting mgb, control rod (csd), module, almaz upm, mfi adapter, gear, honey comb, preset mechanism, lever with bearing, lever, bearing, bearing, roller bearing (repair size with outer dia 110.4mm), roller taper bearing, shield, skewed gear sat, rod, rod, pipe, bearing, bearing

CTN :45252333

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

Central Government/Public Sector

CTN :45415124

15 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap condemned all sort and size m.s.coil,spring,cut piece of bogie,axle box,liner,piston,bearing ring,scrap bull gear,buffer plunger,face plate,screw & cbc coupler,scrap fork eye,break cylinder,break disc,buffer casing,after cooler,head,nut bolt,pipe, rod,and other mix miscellaneous ferrous scrap. excluding p.way items,steel & alluminium. note1.re-punching with other lot will not be allowed. 2 loading after 15.00 hrs will not be allowed. 3.loading will be start at 09:00 am.

Central Government/Public Sector

CTN :45313275

04 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

CTN :45252919

30 May, 2026 NA

Ganjam - Odisha

Tender For supply of feed pump hb ks 52 , driving gear , rectifier full wave 192v ac 280mm , cable assy spl purpose , nozzle

Central Government And Public Sector

CTN :45213627

29 May, 2026 NA

Angul - Odisha

Tender For tender for supply of spares of clinker grinder -driving sprocket , driven sprocket , driving shaft , driven shaft , driving gear pt no 552 013 01 , brg assy non expansion clinker grinder , split lantern ring , wear plate , bearing assembly expansion for clinke , 8 tangential hydroejector assy , angle

Driving Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector