Latest drop gate Tenders | Government drop gate Tenders

Central Government/Public Sector

CTN :41259219

09 Aug, 2025 3.12 Lacs

Durgapur - West Bengal

Tender For provision of new basin (02nos), sink (02nos), making a ramp, replacement of damaged main door with toughened glass an rolling shutter door and internal painting an fixing of vertical blinds in one room backside of old mst building in hcrc group.

State Government

CTN :41204633

31 Jul, 2025 17.86 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii/south zonesh-providing and installation of digital safety system and safety equipments in community halls of kishangarh and harkesh nagar (specialized work) - supplying and installation of high quality image with 4 mp ip bullet camera, audio recording 1/2.8"cmos sensor, 4 mp (1920*1080)@30/25fps; 720p (1280*720)@30/25fps, ultra 265, h.265, h.264, smart ip, up to 30m (98ft) ip distance, day/night functionality, 2d/3d dnr (digital noise reduction), ip67 protection, support poe power supply, 3- axis, , lens - 2.8 mm- 6 mm@f2.0, adjustment angle, pan: 0 ~ 360 , shutter - auto/manual, 1 ~ 1/100000s, minimum illumination - colour: 0.01lux (f2.0, agc on) 0lux with ir on, , digital noise reduction - 2d/3d dnr, day/night - ir-cut filter with auto switch (icr), s/n - >52db, ir range - up to 30m (98ft) ir range, wave length - 850metre, ir on/off control - auto/manual, defog -digital defog, wdr - dwdr, 10/100m base-tx ethernet, ce: en 60950-1 ul: ul60950-1 fcc: fcc part 15, complete as req. make:- hikvision / advidia / dahua/bosch or equivalent as approved by the engineer-in-charge., supplying of nvr support ultra 265/h.265/h.264 video formats, 16-channel input, third-party ip cameras supported with onvif conformance: profile s, profile g, profile t, support 1-ch hdmi, 1-ch vga, hdmi at up to 4k(3840x2160) resolution, hdmi and vga simultaneous output, up to 4k resolution recording, 4 sata hdd up to 10tb, support cloud upgrade, ip video input - 4-ch, upto 160 mbps incoming and outgoing bandwidth, remote users - 128, protocols - p2p, upnp, ntp, dhcp, pppoe, video/audio output - hdmi/vga output - hdmi: 3840x2160/30hz, audio output - 1-ch, 3.5mm ,decoding format - ultra 265/h.265/h.264, sata - 1 sata interface, capacity - up to 6tb for each disk, network interface - 1 rj45 10m/100m self-adaptive ethernet interface complete make:- hikvision / advidia / dahua/ bosch or equivalent as approved by the engineer-in-charge, supplying of 6 tb hdd for nvr complete as req. make- seagate, wd, toshiba or equivalent as approved by the engineer-in-charge., supplying of 16 port gigabit poe switch easy smart managed 16 poe+ (802.3at/af)10/100/1000 mbps rj45 ports providing up to 30w per port total @ 250 watt, 2 non-poe ports total 18 port 2 combo sfp slots for high speed connection i/c testing etc. complete as req. make: cisco/ tp link/ juniper/ netgear/ or equivalent as approved by the engineer-in-charge., supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface/recessed steel/ pvc conduit as required and approved by the engineer-in-charge. make: d-link/ cp-plus/ finolex / havells or equivalent as approved by the engineer-in-charge., supplying of fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm as approved by the engineer-in-charge., supply, installation, commissioning of 43 (108 cm) 4k ultra hd smart led tv with usb port for cctv surveillance system i/c testing etc. as required. make: samsung / lg/ sony or equivalent as approved by the engineer-in-charge., supply, installation, commissioning of 6u outdoor weatherproof rack confirms to ip55 outdoor standards. adjustable 19 equipment mounting verticals provide better mounting flexibility and maximize the usable mounting space depth adjustable mounting slots pole/ wall mounting provision on rear side top panel with ventilation cable entry from bottom. pdu of 6 socket and fan, lockable toughened glass door, powder coated sheet metal cabinet factory with accessories i/c wall mounting, fixing, testing etc. complete as req. make: server rack/ netrack/ dynamic/ rittal or equivalent as approved by the engineer-in-charge, supply, installation, commissioning of online ups 1kva 24 volts inbuilt ovcd for 1-2 hrs. backup for nvr and cameras, monitor i/c wall mounting, fixing, testing etc. as required make: microte

Central Government/Public Sector

CTN :41228633

02 Aug, 2025 3.60 Lacs

Kanpur - Uttar Pradesh

Tender For miscellaneous work in zone-1,1. replacement of damaged flush door shutter in house no 474 i/c rep. of damaged sanitary fitting at h.no 474,2. annual repairing painting white washing of h.no 4068 with sq and garage,3. rep. of damage gi pipe line at h.no.622

State Government

CTN :41269750

09 Aug, 2025 8.02 Lacs

Basirhat - West Bengal

Tender For providing, fitting and fixing bamboo barricading including drop gate at different location surrounding kachua loknath mission for the occasion of janmasthami mela at kachua under basirhat sub-division pwd of barasat division in the district of n24p

corporations/Associations/Others

CTN :41208690

07 Aug, 2025 NA

Surat - Gujarat

Tender For item rate tender for repairing and renovation of carpentary works in sub zone-1 of south west (athwa) zone. - providing & fixing powder coated aluminium partly glazed and partly panelled partition using medium duty sections of hindalco, zindal, narmada, banco or equivalent approved make having section 63.50 mm x 38.10mm ( frame-.758 kg/rmt & middle section- 0.819 kg./rmt), galzing clip with 5 mm thick clear float glass of approved make including all other necessary fittings and fixtures. entire work will have to be made water proof using necessary rubber sectioned wherever required. gaps all round the frame to be filled with approved water proof sealent. bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design., providing & fixing partly panel & partly glass powder coated aluminium doors with aluminium section of hindalco, jindal , narmada,banco or equivalent approved make having poder coated outer frame leg partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / r.m. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), glazing clip (jindal section no. 19370 wt. 0.109 kg./ mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of greenlam, panama or archid make as approved by engineer-incharge including fixing brass pivot, handle, lock etc. complete., providing & fixing window having extruded aluminium colour powder coated / colour anodize section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no.: 4605,@ wt. 1.094kg/mt.) horizontal two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no : 8687, @ wt. 0.695 kg/mt.) vertical member of size 61.85 mm x 31.75mm x 130mm ( of jindal section no : 8758 @ wt. of 0.659 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8947, @ wt. of 0.456 kg/mt/section 8948, @ wt. of 0.457 kg/mt) with 5 mm thick transparent silicon sealant glass fixing to frame as per details etc., providing & fixing window having extruded aluminium colour anodize section frame main outer size 95 mm x 24 mm x 1.17 mm ( of jindal section no.: 2459,@ wt. of 0.738 kg/mt.) horizontal three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no : 8688, @ wt. 1.07 kg/mt.), vertical member of size 92 mm x 31.75mm x 1.50mm ( of jindal section no : 8933 @ wt. 1.06 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8949, @ wt. of 0.456 kg/mt/) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc., providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of jindal section no.14080, @ wt. 0.471 kg per mt) with colour powder coated alluminium frame for lovered glass ventilation with 4 mm thick figured glass as details etc. complete for ventilation., providing & fixing panels -12mm thick indian gypsum panels of saint gobin brand, screwed to g.i. gram at 200mm c/c, frame g.i. frame fabrication with 60 x 26 x 0.5mm perimeter channels as required, 155 x 5 x..55mm intermediate channel at 1220mm c/c, 25 x 10 x 0.55mm ceiling angle at 1220 mm c/c, securely fixed soflit hangers at 1220mm c/c, false ceiling angle shall not at more than 610 mm from adjan wall connecting clips, etc, as required complete as per manufacture specifactions, joints all joints of panels field and finished with indian gypsum, jointing compound, joining tapes, etc. complete including scaffolding as required complete in all respects by engineer in charge., supply & fixing of 16mm.th.armstrong classic lite square edge mineral fiber celling with 24mm grid(l

State Government

CTN :41263590

06 Aug, 2025 8.47 Lacs

Kottayam - Kerala

Tender For this estimate prepared for the urgent repair of toilets at ich, kottayam. provision added for dismantling wall tiles, plumbing accessories and fittings, fixing wall tiles, laying floor tiles, frp door shutter and frame, etc.

Central Government/Public Sector

CTN :41018865

06 Aug, 2025 50.00 Lacs

Khadki - Maharashtra

Tender For corrigendum : repair to joinery, aluminium doors/ ventilators ,steel windows / doors/ ventilators cup board, rolling shutter, steel door, pvc door, wooden doors and windows in certain md accn at cme

Central Government/Public Sector

CTN :41018866

06 Aug, 2025 45.00 Lacs

Khadki - Maharashtra

Tender For corrigendum : repair to joinery, aluminium doors/ ventilators, steel windows / doors/ ventilators cup board, rolling shutter, steel door, pvc door, wooden doors and windows etc in certain otm accn at cme at cme

State Government

CTN :41219042

04 Aug, 2025 4.81 Lacs

Chamba - Himachal Pradesh

Tender For annual repair and maintenance of water supply scheme to chowari town in tehsil bhattiyat distt chamba hp sub head pl cement plaster brick work and pf door galzed shutter etc store shed near ae residence chowari

Central Government And Public Sector

CTN :41266509

12 Aug, 2025 NA

Nagpur - Maharashtra

Tender For supply of main door top shutter

Drop Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors