Latest dropper clip Tenders | Government dropper clip Tenders

Central Government/Public Sector

CTN :45026150

01 Jun, 2026 NA

Multi City - Multi State

Tender For goods, manufacturing and supply of improved switch expansion joint (complete set) with firm's rail as per rdso drawing no. is t-6922 (alt-5/latest alt.) with assembly (with all fittings including cgrsp) for long welded rail (with 65 mm max. gap) b.g.60e1 on psc sleepers. confirming to irs specification: irs/t-10-2025 with latest alt.(term-latest-wherever used will mean the alteration/amendments up to the 10 days prior to date of closing of tender) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45335542

16 Jun, 2026 NA

Medak-T - Telangana

Tender For supply of dropper clip (34mm) with g.s. bolt dia 16 x 40 x 32 with locknut, spring washer b16 and annealed copper split pin 4x32 mm for register arm tube, as per rdso's drg. no.eti/ohe/p/p/2461-1 mod f. make/brand: rdso approved vendors accepted only [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45338437

30 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For manufacture and supply of improved switch expansion joint for long welded rail (with65mm max gap) for b.g 60kg on psc sleepers for curves more than 2 degree to 4 degree confirmingto rdso drg. no. t-8926 alt-1 complete with all fittings as per parts listed in the drawing but excluding grsps as per annexure-a. specification: irs specification irs: t-10-2025 and technical specification for improved sejs (rdso/t-6922 to t-6934). this is a safety item. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45307467

03 Jun, 2026 45.05 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of constr of fighting pd of size 2.4m x 2.4m , soakl pit size 1.0m x 1.0m , steel loop hole size 610 mm x 330 mm , prefabricated steel door size 900mm x1800mm , door window loop hole 50 x 50 x 6mm 1200mm length , mild steel angle 35x35x5mm with , steel roofing trough size 2000x613x180mm , steel roofing trough size 1630x613x180mm , ply wood 10 mm thick , steel beam ismb 150 rsj 150 x 75mm 4.6mtr long , bitumen for filling of expansion joint of pcc , quick setting compound , integral water proofing compound , pcc soild block size 400mm x 200 mm x 200 , pbs roll size 20m x 0.90m , hdpe sand bag of size 75x40 cm , oil bound distemper , synthetic enamel pain og , hdpe sheet 150 micron thick , interlocking tiles. 60mm thick pcc , aggregate 20mm , aggregate 40mm , aggregate 63mm , manufactured sand , common burnt clay building bricks 230x115x75mm , polyurethane thinner , cement base paint , hydrophobic poreblocking ingredients , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4 inch x 4 inch , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated unsheathed single core 1.5 sqm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac 50 hz 6 amps 10 ka , self adhesive plasticized pvc insulation tape , 16a spn or dp main switches , mcb distribution boards in sheet metal , bricktrowe , drop forged high-grade carbon steel brick hamme , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , industrial rubber gloves , aluminium spirit levels 12inch , transparent flexible pvc water leveling tubes , cutting pliers , measuring tape 15 mtr , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45339346

19 Jun, 2026 NA

Multi City - Multi State

Tender For supply of set of thick web switch expansion joint (twsej) (up to 100 mm permissible movement at each end) as per rdso drg. no: t- 8822 alt.4, for cwr/lwr bg (1676 mm), rail type stock rail 1080hh switch 60e1a1, (excluding fittings & psc sleepers and including frieght charges and 18 % gst ) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45335042

01 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of catenary dropper clip complete set as per rdso drawing no.- eti/ohe/p/1192 rev-c conforming to rdso spec. no. ti/spc/ohe/fittings/0130 (10/13) rev-1. complete set shall comprise of allparts and their numbers mentioned in the table of drawing. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45302372

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - brass lump scrap - 98200045(15) cond.& u/s brass lump scrap consisting of flow lamp, oxygen regulators, 63a 5 pin plug components, spcc panel components, catenary ending cones, catenary splices, bushes, bolts, nuts, gas cutting torches, gm valves, float valves, tap bib cock, cp angle valves, dropper clips, contact wire swivel clips, marut hand compression sprayer, brush holders, terminal connectors, pg clamps, bracket direct clamps, steel wire ending cones, briddle wire dopper clips, rods, key spindle, nozzle type, dv components, trunnion body for bmbc, etc. available in the bin with or without other attachments. total gross weight: 865.6 kgs. said to contain total brass content: 845.501 kgs approx., total ms content: 5.65 kgs approx, total aluminium content: 5.194 kgs approx, total stainless-steel content: 3.14 kgs approx, and plastic, rubber, etc: 6.115 kgs approx. hsn code:74040022; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained.5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous ward bin no: 1.

CTN :45063614

30 May, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply of 25vkoc001 c c - injector connection assly , injector holding flange assly. , pyrometric duct , expansion below , electronic governor-actuator , flex master con for dia 88.9-epdm , compensation sensor for exh.pyrometric duct , disc spring , piston ring , air valve , set of spare gasket & o rings , o ring dia 3 x dia 290 , o ring dia 3 x dia 260 , special seal , set of spares for abb vtc254 turbocharger , spare part kit for fw/sw heat exchanger , pt 100 converter with two threshold , ferquency preamplifier-engine speed , supply board , flash 64k card , communication module , pcmcia card , 16 analog input card , rtd input filed module , filed communication module , fuse 4a gg 10 38 , thermistor protection relay(aux415v ac) , injecting piping assly , set of seal for glacier filter , plug no4 , 25 cts , pyrometric duct bank b , expansion bellow , floating bush(te) , oil seal (190x160x15) , d/row sph rlr brg (100x165x52) , d/row sph rlr brg (120x180x46) , cap screw , portable temperature simulator 0-600 deg celcius , disc spring , release spring , gt2 coalescer filter panel , seal tape roll , barring gear assly - gali , type - gd , loctite 480 , crankcase pressure measurement assly , o ring , drilled cap plug - dn 12 , connecting straub metal grip d42 4 epdm , adjusting screw , injector tappet , gasket , injection pipe , o ring , p2-p4 by pass valve-gachot-dn125 , seal ring chord , expansion bellow , metallic gasket , cartridge , v band clamping , lub oil filling connection , rubber compensator , rubber compensator g0125 x 130 x 016 hks-g nbr gr deb , rubber compensator g0100 x 130 x 016 hks-g nbr gr deb , clamping collar , expansion bellows , metallic joint , o ring an 30 , 21a7 , gasket for lub oilcooler (nopv) , channel plate gasket , engine inlet thermostic valve , o ring , disc spring washer dia.56xdia.28.5x3 , disc spring washer dia.40xdia.21.5x2 , temperature sensor , silencer pads (fx4000) , lid seal for fx4000 , hex bolt , hex bolt , time delay relay(on delay) , elelctrical connnection laptop-engine controller , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , repair kit for gali starter , set of seal for gali starter , solenoid valve-24v , main bearing assly , gasket , gasket , o ring , gasket , seal , impeller , 2 lips oil seal , bearing , mechanical seal eagle , o ring , bearing , cap plug , injector sleeve , o rind- ms 29513/238 , v 75 e , o ring - kalrez , inlet valve guide , gasket exhaust manifod , valve seat metallic ring , inlet valve , exhaust valve , rocker arm bush , metallic joint , rocker cover screw , piston ring - top - chrome , ceramique , piston ring - compression-g3-chrome , piston , gasket , set of gasket for hyd. motor , connecting axiflex metal gripd168.3 , epdm , gasket , service tool kit for oil mist detector , exhaust temperature sensor , o ring - ms29513/230 , 60c7 , o ring an26 , 60c7 , nozzle assly -9 x 0.52 x 148 , helicoflex joint hn100 , d17.4 1.8mm , sea water pump , joint type c with limiter , metallic joint , tc speed sensor , gasket rc , o ring d54 , 50x3 v70d , o ring an29 , 21a7 , gasket , hose , metallic joint , set of spares for air valve and actuator , set of spares for p2/p4 bypass valve , actuator service kit , fresh water temp sensor (rtd) , coupling assly cw , connecting cable (unitel way) , analog input field module type 170aaio3000+slave 170fnt11001 , lamp , hooter (electronic) , power switch , fuse 10x38 2a gg , pt 100 converter with two threshold , solenoid valve-safety stop , power fuse , 32a , rsp bearing safety card , icm safety stop card (4 channel) , frequency preamplifier (engine speed) , human machine interface , main bearing temp probe , connecting rod bearing temp probe , washer bsf , ring for casing , bushing

Central Government / Public Sector

CTN :45050332

25 May, 2026 NA

Karimnagar - Telangana

Tender For supply of contact wire dropper clip (107) complete with fasteners and locking wire as per rdsos specn. no. - ti/spc/ohe/fittings/0130 ( 10/13 ) and as per rdsos drg. nore/33/p/1181, rev -g and ri no. - 1181. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45220338

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s alu bronze scrap such as suspension clamp, direct clamp,suspension clamps, direct clamps, ending clamps, contact dropper clip, si a end and b end, catenary single suspension clamp, 95 sqmm catenary ending clamp, catenary ending clamp, 95 sqmm catenary wire splice, catenary splice, catenary wire ending clamp, contact wire splice, pg clamp 1031-2, pg clamp 1041-2, catenary wire splice, catenary ending clamp 65 sqmm, 65 sqmm catenary ending clamp, catenary suspension bracket hook, suspension clamp, catenary suspension clamp, large span wire ending clamp 130 sqmm, terminal connector, large suspension bracket, contact wire dropper clip, section insulator end splice fitting a end and b end, section insulator beam, contact wire parallel clamp, pg clamp 6171, pg clamps rt 1071, si a & b end, terminal to hitachi, ss wire rope ending clamps, tramway direct clamp, single suspension clamp, swivel clips, large catenary suspension bracket, contact wire swivel clips (pg clamp 1031-2, 1031-3, 1051-3), catenary suspension clamp and suspension bracket, catenary splice 65 sqmm. with avaialble ferrous/ non ferrous/copper attachements in as is where is condition. note: segregation and removal of any attachments is not permitted. pl no 98230086

Dropper Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector