Latest drum drive motor Tenders | Government drum drive motor Tenders

Central Government/Public Sector

CTN :41210310

16 Aug, 2025 NA

Thane - Maharashtra

Tender For supply of indoor unit main pcb , indoor unit blower motor , indoor blower set , condenser fan blade , condenser motor , condenser motor stand , inverter kit odu , protective grill for condenser , sensor assembly odu , sensor assembly idu , condenser fan motor , condenser fan motor stand

corporations/Associations/Others

CTN :41241124

02 Aug, 2025 NA

Surat - Gujarat

Tender For supply of all electrical materials at north zone (katargam) light department in surat municipal corporation.-, tube light and accessories, 4 ft. (1200 mm) tube fitting including 36/40 watt electronic ballast without tube rod only fixture, 4 ft. (1200 mm) tube light rod, light output 2450 lumens., 4 ft. 18/20 watt led complete pvc t5 tube light lumen output 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete pvc tube light lumen output 800/1000,, 4 ft. 18/20 watt led complete aluminum body t5 tube light lumen output 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete aluminum body tube light lumen output 800/1000,, 4 ft. (1200 mm) tube fitting without led tube rod only fixture with rotating type side holder, 4 ft. led t5 tube light rod, glass type 18/20 watt lumen out 2100, 1200 mm luminary efficiacy 100lm/watt, 36 watt electronic ballast (choke), tube light side holder simple, led tube light side holder (rotating type), lamp & halogen tube, 40w tungsten filament lamp, 60w tungsten filament lamp, 100w tungsten filament lamp, 7 w led lamp, 9 w led lamp, 12 w led lamp, light & accessories, 2 * 2 feet square 36/40 (watt) led fixture for indoor lighting or its equivalent, 2 * 2 feet square 36/40 (watt) led fixture driver for indoor lighting or its equivalent, 18/20 watt, led panel light (square/round), 1700 lumens, 20/24 led panel light size 1 * 1 inch, 12/15w led panel light (square/round), 1020 lumens, 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k, 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k, celling fan & accessories, supply of 1200 mm sweep (48"), bee 5 star rated, ceiling fan with brush less direct current (bldc) permanent territe magnet motor, class of insulation: b, rust free 3 nos. aluminum blades, 2 nos, canopies, shackle kit with earthing provision, 22 guage copper winding, power factor not < 0.9, service value (cmm / w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm, ceiling fan, (48"), 1200 mm, energy efficient, bee 1 star rated, high speed air delivery, minimum 218 cmm input power maximum 53 w, pedestal fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillanting, type and adjustable height complete with guard regulator, & standard lead fleixble wires and plug top 110 watt., supplying & erecting single phase industrial pedestal fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 450 mm dia size and maximum speed 1440 rpm 0.80 a,80 watt., wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating, type and adjustable ,height complete with guard regulator, & standard lead flexible wires and plug top, wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating, type and adjustable ,height complete with guard regulator, & standard lead flexible wires and plug top, supplying & erecting single phase approved make industrial wall fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 600 mm dia size and maximum speed 1440 rpm 0.80 a,180 watt., supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 300 mm dia size and maximum speed 1350 rpm, supplying & erecting single phase apporved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 225 mm dia size and maximum speed 1370 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 150 mm with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 200 mm with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers &

corporations/Associations/Others

CTN :41234182

04 Aug, 2025 3.93 Lacs

Delhi - Delhi

Tender For procurement of essential materials for day to day maintenance work at charak palika hospital, moti bagh, new delhi. - led tube light 20 watt, natural white, 4000 k, cri 70, 240 v, 50 hz, suitable for t-8 fluorescent tube fittings. warranty :- two years from date of supply make: philips/wipro/ havells/ crompton, led tube light batten 20 watt, natural white, 4000 k, cri 70, 240 v, 50 hz, warranty:- two years from date of supply make: philips/wipro/havells/ crompton, neon tester, size-5 inch, 220/240 v, 50 hz, duly isi marked. make - taparia/jk, bakelite sheet 4x4 feet, 3 mm thick (each sheet),make- super hylem, modular socket 15/16 amps 6 pin, 220/240 v, 50 hz, duly isi marked.(make: anchor (cona), anchor penta, crabtree, as per sample), modular switch 15/16 amps, 220/240 v, 50 hz, duly isi marked. (make: anchor (cona), anchor penta, crabtree, as per sample), modular socket 5/6 amps, 3 pin 220/240 v, 50 hz, duly isi marked. (make: anchor (cona), anchor penta, crabtree, as per sample), modular switch 5/6 amps, 220/240 v, 50 hz, duly isi marked. (make: anchor (cona), anchor penta, crabtree, as per sample), modular base and cover plate for 3 module , make anchor /roma as per sample, modular base and cover plate for 6 module , make anchor /roma as per sample, modular base and cover plate for 8 module , make anchor /roma as per sample, modular base and cover plate for 12 module, make anchor/roma as per sample, batten holder 220/240 v, 50 hz, duly isi marked. make: sainico/kinjal/antex, pvc batten 3/4, stepped type fan regulator modular 2 module isi marked (make: anchor (roma) as per sample), modular bell push 10amp, switch type, 220/240 v, 50 hz, duly isi marked. (make: anchor (roma) as per sample), pvc insulated frls copper conductor 2.5 sq.mm, 90 mtr. each coil f.r pvc insulated single core unsheathed with bare copper conductor 1100v as per: is: 694/1990, 50 hz, duly isi marked.(make: havells / polycab ), electric bell , 220/240 v, 50 hz, duly isi marked (make: bajaj/kinjal/antex/sargam), insulation friction cotton tape 9m , make kinjal /jonson / eti, supply of ceiling fan 48" (1200 mm) rating performs well at low voltage, rpm 350-380, warranty 02 years from the date of supply 220/240 v, 50 hz, 220/240 v, 50 hz, make:- orient/ havells/ crompton/ usha, 20 a , spn industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure, 8 way , spn , double door mcb db make havells/anchor, 12 way , spn , double door mcb db make havells/anchor, supply of exhaust fan double ball bearing heavy duty, 12" (300mm sweep) complete with motor, 3/4 blades sets down double ball bearing and motor should be copper winding performs well at low voltage, rpm 1400, 220/240 v, 50 hz, grey colors. warranty 02 years from the date of supply, make:- philips/ havells/ crompton

State Government

CTN :41215402

08 Aug, 2025 NA

Kolkata - West Bengal

Tender For supply and delivery of daily maintenance materials for various sites under lalbazar electrical section pwd - supply & delivery of 20w 4 led tube with extruded mettallic heat sink (make: crompton/ philips/ wipro), supply & delivery of 2 length 10w led single batten with in built led tube( (non-replaceable tube light). (make: crompton/ philips /wipro), supply & delivery of 250v,9w b/c (b-22) led bulb(cdl). (make: philips/crompton/havells), supply & delivery of 250v, 18w, 4 pin, pl-l led lamp.( make: havells- photon ultra 18w pl- l/crompton/ philips)., supply & delivery of 250v, 36w 2x2 square recessed type led fittings in cdl-6500k( make: philips-full glow-rc 380b-36/wipro), supply & delivery of250v,2w led spot light in cdl (cct 6500k). (make: philips-astra spot-2w/ wipro), supply & delivery of 250v, 11-18a single phase motor starter.(make:north-west/legrand), supply & delivery of 250v, 25a plug top with indicator.(make:north-west), supply & delivery of 250v, 65w,400 rpm 1200mm sweep ac ceiling fan with all accessories like fork,canopy, blades(make:usha-striker plus/orient-pspo/polar), supply & delivery of 250v, 450mm sweep full metal body ac wall bracket fan with all accessories and blades(make:epc-tempest/bajaj-supreme plus/cinni), supply & delivery of 250v, 3.15uf aluminium casing, copper terminal fan condenser. (make: universal/ tibcon / havells), supply & delivery of 250v, 2.5uf aluminium casing, copper terminal fan condenser. (make: universal/ tibcon / havells), supply & delivery of analogue daily programmable time switch. (make: legrand/l&t-j648b1), supply & delivery of digital astro mini time switch. (make: legrand/l&t-t2ddt7), supply & delivery of 250v,250w, 120 lm/w flood light with die cast aluminium housing with driver rating higher than the fittings rating. (make: philips/wipro)

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

Central Government/Public Sector

CTN :41265534

11 Aug, 2025 NA

Salem - Tamil Nadu

Tender For supply of electric ceiling fan with bldc motor (v3) isi marked to is 374

State Government

CTN :41214647

04 Aug, 2025 NA

Vadodara - Gujarat

Tender For supply of electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2)

State Government

CTN :41250757

09 Aug, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of electric ceiling fan with bldc motor (v3) isi marked to is 374

corporations/Associations/Others

CTN :41191883

07 Aug, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps es em iii preventive maintenance repairing and painting of ht motors of id fan motor 4a 4b fd fan motor 4a 4b pa fan motor 4a 4b and coal mill motor 4a 4b 4c 4d 4e 4f during annual statutory overhauling of unit iv for year 2025 26 or thereafter

corporations/Associations/Others

CTN :41191845

07 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of fan blade assembly for air oil cooler, hydraulically operated cabin cylinder, main chute cylinder and shrink disc coupling suitable for hydraulic motor cb 840 _ 840 for stacker cum reclaimer hydraulic system

Drum Drive Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors