Web Analytics Made Easy - StatCounter

Drying Enamel Tenders

Get complete information related to latest Drying Enamel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Drying Enamel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Drying Enamel Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45026147 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For supply of synthetic enamel, interior, finishing, smoke grey for the system of interior painting of coaches. specification:- is 133:2023(sixth revision) including optional requirements mentioned in table 2 & 3 of is 133:2023(sixth revision), isc:692 with rdso amendment no.1a(rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989 amend.1 (third revision)(reaffirmed2018) grade b-1. (ii) the goods should be dispatched within 02 months from the date of manufacturing and firm will give an undertaking thatthe material supplied is not more than 60 days old. (iii) suppliers have to write on the container batch no., date, month, year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties - not less than one year from the date of manufacturing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45194534 Due date: 23 Jun, 202623 Jun, 2026 NA
Tender For corrigendum : supply of synthetic enamel exterior finishing,ready mix paint for icf coaches, colour-apricot yellow to shade ral-0708040 conforming to is:8662/2024 (third revision) and rdso amendment no. 1 (revision. 0) for pigment content as an additional requirement to is: 8662/2024 with additional requirements of icf/md/spec.-045 issue status: 02, rev. no.-03 dt.24/06/2007 [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45279914 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For supply of bricks non modular , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand proper grading , fine sand proper grading , moorum filling material , portland cement , vitrified floor tile 60x60 cm , white cement , paint primer , distemper paint , acrylic smooth exterior paint , synthetic enamel paint , white cement based putty , paint roller , paint brush 100mm , tmt bar 12 mm 880 kg and 08 mm 250kg , binding wire gi , rectangular hallow section pipe 50 25 2.50mm , gi plan sheet barge board upto 300 mm and gutter 600 mm over all girth , cgi precoated galvanised iron sheet 12by3 , cgi precoated galvanised iron sheet 6 by 3 , self screw , welding rod , 4 cutting blade , iron angle frame for door angle size 40x40x6 mm , wooden door 35 mm thick shutters , iron angle window size 1.2by 1.2 mtr with grill bar and glass panes fix with silicon complete all fitting accessories , tower bolt , handle , aldrop , calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm , 4 mm dia steel wire rope lock u clamp set pu coated , aluminium with stainless steel ss coating 4 ftx 3 mtr mosquito net wire and meshs , 1.5 sqmm single core wire , 2.5 sqmm single core wire , 6 amp switch , 6 amp socket 5-pin , 16 amp switch , 16 amp socket , ceiling rose , 1200mm ceiling fan , modular fan regulator , led tube light 20 or 22 watt , 16 amp single pole mcb , 32 amp double pole mcb , mcb box 8-way , pvc board 9x8 , 25 mm casing capping , 25 mm casing capping clip , screw 1.5 , 6 mm pvc gatti , pvc 6-way board , insulation tap

CTN :45037853 Due date: 27 May, 202627 May, 2026 NA
Tender For bid to ras bid to ras corrigendum : supply of in aqueous base bott of 100ml , triamcinolone acetonide buccal paste 0 point 1 percentage w w kenacort tube of 7 point 5gm , disposable surgical bouffant head caps pkt of 100 , disposable surgical gown pack of 01 gown , inter dental brush narrow space pkt of 05 , formalin tablet for vapour sterilization of equipments box contains 100 tablets , denture box , denture adhesive powder contains cellulose gum zeofree parabens favours bott of 15gm , neo endo endodontic niti rotary flex files length 21 mm taper 4 percentage and 6 percentage set of 6 , neo endo endodontic niti rotary flex files length 25 mm taper 4 percentage and 6 percentage set of 6 , absorbent cotton ribbon gauze size 2 point 5 cm x 100 mtr , disposable syringe 2ml pkt of 100 , disposable syringe 5ml pkt of 100 , disposable syringe 10ml pkt of 50 , disposable syringe 20ml pkt of 25 , dental floss with grip handle 50 pcs in box , h files size 15 length 21mm set of 06 , h files size 20 length 21mm set of 06 , h files size 25 length 21mm set of 06 , h files size 30 length 21mm set of 06 , ketac molar restorative glass ionomer cement with high flexural strength pkt contains 15g powder 7 point 8 ml liquid 01 mixing pad and 01 plastic scoop , h files size 15 length 25mm set of 06 , h files size 20 length 25mm set of 06 , h files size 25 length 25mm set of 06 , h files size 30 length 25mm set of 06 , surgicare disposable sugical rubber gloves size 7 , surgicare disposable sugical rubber gloves size 7 point 5 , h files size 08 length 21mm set of 06 , h files size 10 length 21mm set of 06 , h files size 08 length 25mm set of 06 , h files size 10 length 25mm set of 06 , miracle mix glass ionomer restorative radiopaque silver alloy glass ionomer cement restorative pkt contains powder 15g liquid 10g alloy 17g , all purpose calcium hydroxide paste calcigel pkt of 04 tubes , temporary filling material contains eugenol based pkt of 40gm , desensitizing tooth paste tube of 50g with potassium nitrate 5 percentage w w sodium monofluorophosphate usp 0 point 7 percentage , gdc mouth mirror tops pkt of 12 pieces , inj lignocaine hcl without adrenaline contains lignocaine hydrochloride ip 20 mg methylparaben ip 0 point 1 percentage , regular glucose energy drink powder pkt of 500g , candid mouth paint bott of 25 ml , patient drape vinyl reusable , endodontic niti k files length 21mm size 15 set of 06 , endodontic niti k files length 21mm size 20 set of 06 , endodontic niti k files length 21mm size 25 set of 06 , absorbable surgical suture usp synthetic vicryl 3-0 22mm half circle cutting pkt contains 12 packs , absorbable surgical suture usp synthetic vicryl 3-0 20mm half circle round bodied pkt contains 12 packs , absorbable surgical suture usp synthetic vicryl 4-0 16mm circle cutting pkt contains , non absorbable surgical suture usp mersilk 3-0 26mm 3 by 8 circle reverse cutting , non absorbable surgical suture usp mersilk 0-0 30mm half bodied pkt contains 12 packs , non absorbable surgical suture usp prolene 3-0 monofilament polypropylene blue 22mm circle convetional cutting , non absorbable surgical suture usp prolene 4 zero monofilament polypropylene blue 17mm half circle taperpoint absorbent cotton roll pkt of 500, gas for blow torch bottle of 500 ml, smith stainless steel arch wire 24 gauge 0.4 mm (soft), smith stainless steel arch wire 26 gauge 0.4 mm (soft), nickel titanium erich arch bar, micro motor straight surgical carbide bur hp 703, micro motor round surgical carbide bur hp 06, matrix band strips tofflemire wide 6 x 85mm pkt of 12 pieces, matrix band strips ivory pattern pkt contains 12 pieces, barbed broaches (0-6) assorted length //bid details 2 / 56

CTN :45154913 Due date: 11 Jun, 202611 Jun, 2026 NA
Tender For zonal work in zone no 24 for period ending 30.06.2027. jurisdiction:: gonda (excluding) to risia (including). - all the items of sub head 1.0 (carriage of materials ) as per cpwd dsr 2021 , all the items of sub head 9.0 ( wood and pvc work ) as per cpwd dsr 2021. , supply to semi skilled worker maison, black smith & carpenter for day to day maintenance as per required. (@ rs.918.00 for area 'a', rs.781.00 for area 'b' & rs.650.00 for area 'c') , supply to unskilled worker as per helper with maison, black smith & carpenter for day to day maintenance as per required. (@ rs.827.00 for area 'a', rs.693.00 for area 'b' & rs.556.00 for area 'c') , hiring of jcb machine (in good working condition) for leveling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, jcb machine, machine operator, fuel, etc. the contractor shall arrange road permit for vehicle for all the states of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. payment shall be made for actual working hours at site , additional for running charges for per km running of tractor with trolly. (over item no. ns/4 above , supply and stacking properly for measurement purpose of good quality moorum asper instruction of engineer-incharge in concerned sse(works) store or as required place. the rates isinclusive of royalty, all taxes, lead, lift etc complete. staked moorum to be measured in cum andpayment to be made per cum, after deduction of shrinkage of voids @ 7.5%. , supply and stacking properly for measurement purpose of good quality coarse sand(minimum zone iii ) as per instruction of engineer-incharge in concerned sse(works) store or asrequired place. the rates is inclusive of royalty, all taxes, lead, lift etc complete. staked moorum tobe measured in cum and payment to be made per cum, after deduction of shrinkage of voids @7.5%. , supply and stacking properly for measurement purpose of local sand / pitsand/yamuna sand for filing purposes as per instruction of engineer-incharge in concernedsse(works) store or as required place. the rates is inclusive of royalty, all taxes, lead, lift etccomplete. staked moorum to be measured in cum and payment to be made per cum afterdeduction of shrinkage of voids @ 7.5%. , supply and stacking of unslaked lime as per instruction of engineer-incharge inconcerne sse(works) store or as required place. the rates is inclusive of all taxes, lead, lift etccomplete , supply of synthetic enamel paint in all shades of reputed manufacturer brand as perinstruction by engineer-in-charge at site. , provinding and fixing wall panelling tiles of require size , provinding and fixing pvc false celling of require size. , provinding and fixing designer wallpaper in all colours shadesand design. , ,

CTN :45296154 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

CTN :44741125 Due date: 29 May, 202629 May, 2026 NA
Tender For bid to ras supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744 (q3)

CTN :45317992 Due date: 04 Jun, 202604 Jun, 2026 NA
Tender For supply of electrical 88 co2 , strip it spraytek paint remover , quik solv , strippex heavy duty synthetic rubber coating bulk , strippex heavy duty synthetic rubber coating spray , spezet strippex tape , tape insulating

corporations/Associations/Others

CTN :43097646 Due date: 27 May, 202627 May, 2026 8.52 Lacs
Tender For bid to ras supply of procurement of different misc consumables for tg ahp and pws dstps - hylomer universal blue 100 gm pack , r. t. v. sealent 732bysilastic 732 rtv silicon sealant , teflon sheet, 3mm thick , stanvac pen oil indudtrial grade heavy duty penetrating o , moly kote p-37,moly kote p. 37 ,molikote p-37 paste i , shims size 0. 05mm material ss304 , wd 40 , nonmagnetic shim,material- ss 304, width- 01 mtr,thickness- 0. 25 mm , nonmagnetic shim,material- ss 304, width- 01 mtr,thickness- 0. 15 mm , shims size 0. 2mm material ss-304 , shims size 0. 1mm material ss-304 , shims size 0. 3mm material ss-304 , oil seal size- 30 x 52 x 10 , oil seal size- 30-47-7 makeskfbyjk pioneer , shims size 1mm material ss-304 , oil seal, part no- 5000, moc- nitril rub with steel spring, , oil seal size- 140 x 170 x 15 , oil seal, size- 220 x 250 x 15 mm , epo x y stickbymagic stick or equivalent 7inch long per stick , pvc transparent nylon braided hose pipe, size- 1. 25inch , viton rubber oil seal having size- 18 x 30 x 7 mm , seal oil, size- 70 x 90 x 10 , plain aluminium sheet as per is- 737,in roll fm , aluminum sheet roll thickness- 22 swg, width- 36inch , neoprene rubber cord with hardness 80 irhd as per astm , oil seal size- 50-68-8 make- skfbyjk pioneer , paint enamel colour - golden yellow , brush painting size 2 inch , sea green-berger paint , synthetic enamel paint smoke grey colour , paint dark blue asian enamel , painting brush, size - 4inch , epo x y black paint , thinner , paint enamel colour - red ) /bid number: gem/2025/b/6951084 * /dated: 08-12-2025 & & / bid document1 / 31

State Government

CTN :45198711 Due date: 28 May, 202628 May, 2026 45.0 Thousand
Tender For corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3)
 Loading, Please wait...

Connect us via What's Up