Latest dsl bus bar Tenders | Government dsl bus bar Tenders

CTN :45343217

17 Jun, 2026 NA

Kolkata - West Bengal

Tender For foundation work for installation of 10 ton tower crane (01 no.) at grse-kpdd unit, kolkata

CTN :45334775

19 Jun, 2026 NA

Multi City - Multi State

Tender For power supply arrangement & electrical wiring in connection to "proposal for construction of new shed for stocking materials of 140 t crane, detc & tower car at crane shop and flooring of wrs-iii etc. inside workshop under sse/w/ws/jmp

CTN :44946294

16 May, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : design, certification & commissioning of tower crane by ica , supply of 10t tower crane with 40 m jib , installation and commissioning of 10t tower cranes , 5 yrs comprehensive amc of 10t tower crane

CTN :45018875

15 May, 2026 107

Bengaluru - Karnataka

Tender For beedi deepa nirvahane - alugcable4cx35, aluminium cable 25 sq mm, fuse carrier 200a, high must 12.5 mtr, top 100mm and bottom 310 mm dia galavnized in single hotdip as per bsen iso 1461/astm a123, the mast shall be created on existing rcc footing,with 6nos 150w led flood light, high mast lighting 8meter tower with ladder and led flood lighting system, labour charges for highmast service including labour,crane ,transportation and other expenses, highmast timer, highmast light 9 meter full set with 150w flood light 6 nos, highmast light 9 meter full set with 150w flood light 4nos, highmast lights 9meter full set with 200w led flood light 4nos, high mast 12/12.5 mtrs, light fixing charge/gptpzp6, pipe clamp set/gptpzp6, meter box/gptpzp6, high mast light 10m height, alluminium 20sq cabel, led bulb 40w, led street light 50w, led street light 150w, led street light 100 wattage, led flood light 300w, led flood light 250w, led flood light 200w, led flood light 150w, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 1 sq mm, copper wire 16 sq mm, labour charges, tpn-63a, led serial lights, cable tie 12inch, cable tie 10inch, ceiling fan normal, electrical porcelain fuse-32a, led street light 120watt , led 60watt bulbs, led 50watt bulbs, led 30watt bulbs, led 20watt bulbs , cable tie 8inch, contractor with no protection 40a, aluminium cable 16sqmm, waterproof tape, single phase meter box, sodium light 100watt choke, flood light 150/200/250watt, led street light 200w, dp switch 63amp, dp switch 32amp, aluminium cable 6sqmm, aluminium cable 4sqmm, aluminium cable 2.5sqmm, aluminium cable 10sqmm, aluminium cable 2c6sqmm flat , bulb doom 50watt, three phase meter box, test lamp kit, ms fittings with clamps 1p5 inch, screwdriver set big size, enclosure box-mcb , mcb 2pole 32a, mcb single pole 32a, led street l 50w, led street l 150w, led street l 100w, led electronic open choke-150w, insulation tape w, auto on and off timer, change over 20amps, bed switch-b, high mast led bulb 200 watt (street light items), high mast led bulb 150 watt (street light items), high mast led bulb 100 watt (street light items), led bulb 50 watt (street light items), led bulb 32 watt (street light items), led bulb 25 watt (street light items), led bulb 23 watt (street light items), led bulb 20 watt (street light items), street light shade (street light items), led street light set 50 watt (street light items), led street light set 40 watt (street light items), led street light set 25 watt (street light items), street light bend pipe and clamp (street light items), tester (street light items), screw driver (street light items), cutting player (street light items), gang box 3 way (street light items), gang box 2 way (street light items), gang box 1 way (street light items), tp switch (street light items), dp switch (street light items), switch 16 amps (street light items), switch 6 amps (street light items), mcb 4 pole 63 amps (street light items), mcb 4 pole 32 amps (street light items), mcb 3 pole 63 amps (street light items), mcb 3 pole 32 amps (street light items), mcb 32 amps (street light items), mcb 25 amps (street light items), mcb 10 amps (street light items), mcb 6 amps (street light items), copper wire 4.0 sq mm (street light items), copper wire 2.5 sq mm (street light items), copper wire 2.0 sq mm (street light items), copper wire 1.5 sq mm (street light items), cg holder (street light items)

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall

Central Government/Public Sector

CTN :44882341

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 15 ton eot crane (crs-cr-711), with overall span of 14.376 mtrs, with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings,driver cabin,fan,alarms,ladder inside the driver cabin,master controls, wire ropes carrying the hooks, lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements. note: hooks, snatch blocks/hook blocks, main power collection dsl bus bars/angles of the crane, main ladder to climb onto the crane, two long travel gear boxes and one cross travel gear box are not for sale. the two long travel gear boxes, one cross travel gear box, hooks and snatch blocks/hook blocks should be returned to the custodian by the purchaser before delivery. for handing over the gear boxes, purchaser should follow dismantling using proper tools instead of cutting in order to avoid damages. main power collection bus bars/angles and the ladder to climb on to the crane should not be disturbed as these belong to railways. uc no.120732002. makers name-vaughan crane/england.total approximate weight 11000 kgs. [mild steel 10687 kgs, cast iron 200 kgs, copper 56 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 50 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-01419 dated. 20.02.26. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.

CTN :44609792

13 Apr, 2026 2.17 Crore

Gorakhpur - Uttar Pradesh

Tender For corrigendum : providing of manpower outsourcing services - fixed remuneration - non-it technical; rail crane operator; high school,manpower outsourcing services - fixed remuneration - non-it technical; technician grade -i; high school,manpower outsourcing services - fixed remuneration - admin; data entry operator; secondary school,manpower outsourcing services - fixed remuneration - non-it technical; electrician/lineman technician -grade-ii; high school,manpower outsourcing services - fixed remuneration - non-it technical; track maintainer; high school,manpower outsourcing services - fixed remuneration - non-it technical; tower wagon helper; 8th pass,manpower outsourcing services - fixed remuneration - unskilled; office assistant; 8th pass

CTN :44731730

10 Apr, 2026 28.41 Lacs

Solapur - Maharashtra

Tender For repairs to service gate (1.2 m x 1.2 m, roller type, 10 m water head, 4 nos. repair to rollers, stiffner plates, fixing new closed tower cabin, starter supply, hoist crane rail, hoist repair etc at bhima sina link canal under ujjani dam

Dsl Bus Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector