Latest dth system Tenders | Government dth system Tenders

State Government

CTN :45733854

06 Jul, 2026 18.59 Lacs

Delhi - Delhi

Tender For boring/drilling of borewells by dth system i/c supply and installation of feeder pillar and submersible pump at dda park in shalimar bagh area under horticulture division-10.

State Government

CTN :45582279

29 Jun, 2026 26.08 Lacs

Gandhinagar - Gujarat

Tender For providing subscription charges and various services for tata sky dth & television erecting/shifting for various dth systems & tv installed at various locations at swarnim sankul 1 & 2, block-11,14, nirman bhavan and vigilance office in gandhinagar for the year 2026-27 ( period april 2026 to march 2027 )

corporations/Associations/Others

CTN :45472124

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of books and flash cards (by icds bihar) (q3)

State Government

CTN :45374830

10 Jun, 2026 18.59 Lacs

Delhi - Delhi

Tender For corrigendum : boring/drilling of borewells by dth system i/c supply and installation of feeder pillar and submersible pump at dda park in shalimar bagh area under horticulture division-10.

State Government

CTN :45374831

10 Jun, 2026 27.71 Lacs

Delhi - Delhi

Tender For corrigendum : boring/drilling of 4 no. bore well by dth system, supply and installation of feeder pillar and submersible pump at dda green land behind pocket 11 sector 23, rohini under horticulture division-5.

CTN :45379134

10 Jun, 2026 NA

Arakandanallur - Tamil Nadu

Tender For for electrical and communication engineering department lab equipments are required as per new syllabus - upgradation of labarotariesece department, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., single phase induction motor1 hp, 230 v ac, 1500 rpm with loading arrangement 1 no.voltmeter: (0 300) v ac, 96 96 mm with input terminals 1 no.ammeter: (0 10) a ac, 96 96 mm with input terminals 1 no.wattmeter: 2 kw, 96 96 mm with input terminals 1 no.power factor meter: 96 96 mm with input terminals 1 no.auto transformer: 0 300 v, 1 variac 1 no.mcb: 2-pole, 40 a / 230 v ac 1 no.digital rpm indicator with proximity sensor 1 no.aluminium brake drum: 230 mm diameter 1 no.spring balance: (0 25) kg 02 nos.circuit diagram printed on front panel with instruments and connecting terminals.motor and loading arrangement mounted on rigidchannel frame with anti-vibration mounting pads, m12 1.5 bolt & nut, 85 mm dia 4 nos.mild steel powder-coated electrical panel tablesetup., auto transformerinput: 230 240 v ac, 50 hz.output: variable (0 270) v ac.rating: 1 kva.insulation class: class f / class h.construction: copper winding with carbon brush arrangement.mounting: bench-top / panel type.protection: suitable fuse / overload protection., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz. dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m. controls: channel selection. volume control. fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption. pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna. additional features: dth subscription connection with doordarshanfree channels., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection.sim card interface: supports gsm sim cards compatible with 2g / 3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication, and communication functions. compatible with standard 6-pin / 8-pin sim card sockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embedded system interfacing.sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control. supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at command support. iso/iec 7816 smart card communication support. sim communication command monitoring facility. hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/r

CTN :45365495

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for ece department - purchase of equipments, dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x), 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc 2148) cpu - lpc2148, core - 16/32 bit arm7tdmi-s speed - max 60 mhz, flash - 512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay& buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection. sim card interface: supports gsm sim cards compatible with 2g /3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication,and communication functions. compatible with standard 6-pin / 8-pin sim cardsockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embeddedsystem interfacing. sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control.supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at commandsupport. iso/iec 7816 smart card communication support. sim communication command monitoring facility.hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/reception built-in keypad for standalone operation. lcd display module (128 64) for menu andstatus display. on-board microcontroller-bas

State Government

CTN :45270516

04 Jun, 2026 75.00 Lacs

Jaipur - Rajasthan

Tender For proposal for 200 mm dia. existing tubewell deepening by dth system beyond existing depth of tubewell in sub div.chaksu

State Government

CTN :45276521

04 Jun, 2026 75.00 Lacs

Jaipur - Rajasthan

Tender For proposal for 200 mm dia. existing tubewell deepening by dth system beyond existing depth of tubewell in sub div.chaksu

CTN :44728383

25 May, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of main switch board spares c c - switch 4-port , gyro pump , power contactor mnx 70 , indicating lamp-colour: yellow,input , voltage: 240v ac 50hz, , indicating lamp, colour: green, input , voltage: 240v ac, 50hz,le , indicating lamp,colour: green, input , voltage: 24 v dc,led typ , 1000w.remotly operated search light , with control panel , mccb 20a , mccb 32a-nom 32a 1auxcont+1trip alm , therm 25,6-32a magne288a , mccb dn0-63a , mccb dn0-100a , power contactor mnx9/32 , power contactor mnx 45 , mccb 250a tp with 1 aux. with shunt trip , hand change over switch (hcos) , vme ip carrier , 50 pin pcb-ai , flash memory card 2 mb , connector for rtd card , connector for ai card , vme processor , 24*30 mm yellow indicator , 24*30 mm red indicator , 24*30 mm green-momentary 2 c/o pb , 24*30 mm red-momentary 1 c/o pb , 24*30 mm red-momentary 2 c/o pb , 24 30 mm blue-momentary 1 c/o-pb , 24*30 mm white-momentary 1 c/o pb , trackball , interposing relay, 2 c/o 24 vd , terminals for plc cards , ms 10 horizontal float level switch , intercom system (pcb assembly for , pan 5701) , micphone(stowage hook, preamplifier 7 , pin(pan1424-00&pan6702) , intercom system (line interface , module)-pas30670 , 63a, 3pole, mcb , 2x18w fluorescent tube light , mast head light (white) , stern light(white) , all round light(white) , all round light(red) , power supply unit(132 084ng003) , nsiu-nmea(na06 201109) , power unit 24vdc (nb05 307) , internal communication system(pre amplifier pcb imcos 8210) , motorised potentiomed er(frequency) , led lamp(red)12v dc , 2a, 1 way mcb 2p , serial to usb converter for touch screen , rectifier unit , end cover for sttb 2.5 , proximity switch 0-150 rpm , optical smoke detector head sv.ip44d (conduit box) , gyro connection pcb , gyro sensor pcb , gyro outer sphere pcb , mk2-modulator pcb , spare parts x/s-mtr down , local control pcb , mk2-power i/o pcb , sub-miniature fuse 1a 250 v , cia cont to i/f pcb , fan, complete assembly , encoder 2048, pulse per revolution , spare parts x-ped up , relay 12v dc , motor control module , trackball 50mm nsc , insc-isw-controller , convertor ac 85-264v/dc 24v , sailor ip handset & cradle , em log fd card , miniature cirucit breaker 20 amps , mcb 3 pole 50a , hrc fuse, fuse link (2a) , hf fuse link 4a , hf fuse link 4a , 22.5mmdia.240v ac,green, ledlamp, teknic , mccb-25a , acb spare aux. contact (6no+6nc) , mccb dth800 inst 360-640a , mccb, 3p, dl-100, 40a , voltage relay(t3300-02) , synchroscope , ammeter, aε, 0-400a , tp mcb,240v ac, 50hz, 4a , terminal cts 2.5un , terminal cts 6u , power terminals-suitable up to 6 sq.mm wire , o/c &s/c relay (t2500-06) , terminal cts 10u , double frequency meter -415vac range45-50-55hz size 96 x96 , quint-power supply unit , wtrd1 thermistor relay , power terminals-suitable up to 70 sq.mm wire , synchronoscope-input415vac size:96x96 with gasket , mcb 10a tp , mcb 16a tp , mcb 25a 3 pole , mcb 40a tp , mcb 63a tp , hcos 50a (with out enclosure) , dn2-mm 240v ac electrically operated mechanism direct drive , motor protection relay, microprocessor based , indicating lamp-colour: blue, input , voltage: 240v ac, 50hz,le , 6a,1 way mcb, 2p , ais gps anteννα ατ575-68(2gdb,tnc-f) , hrc fuse, fuse link (4a) , hrc fuse, fuse link (6a) , hrc fuse base & carrier 2a/6a , red push button , governor control switch , control terminals , illuminated pb,red , illuminated pb.green , control terminals cst 2.5 , relay mno 240vac 4 no conatcts , relay 240 v ac mno realyn 3no+1nc contact , relay mno 415vac, 4nc contact , sart , motorised mechanism for 400/630

Dth System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

State Government

State Government

State Government