Latest dual clutch Tenders | Government dual clutch Tenders

corporations/Associations/Others

CTN :45287797

27 May, 2026 NA

Dharmapuri - Tamil Nadu

Tender For disposal of scrap - scraped- aluminium body item & cut pieces, scraped-all ms angles cut pieces and seat frames pieces, scraped g.i.sheet & cut pieces, scraped-used waste engine oil 210 ltr with barrel, scraped spring leafes with clamp and without clamp, scraped 210 ltr empty closed metal barrel, scraped - 182 kgs empty open metal barrel, scraped 200 ltr empty tyre plant barrel, scraped - 210 ltr capacity empty plastic barrel, scraped - gear wheel & shaft, scraped - aluminium piston and aluminium item, scraped bearing & cone, scraped brass rivet and brass item, scraped- hanger & shackle, scraped- brake drum & cylinder liner, scraped - clutch plate, scraped-all types of filter(2.248mt), scraped - brake lining & clutch facing(56.202mt), scaped-auto electrical item, scaped -bus wheel disc with out ring, scraped-all auto steel spares & spring buses bolt nut item, scaped computer & printer items 1.thcl- p iv -2.8 ghz -5nos 2.hp- piv- 3.8 ghz -3nos 3.ccs-piv-2.66 quad -4nos 4.hcl -intel core p55 2.66 ghz -5nos printer items 1.tvs hd 245 gold (dot matrix) -6nos 2.tvs hd 245 gold (dot matrix) -9nos 3.tvs msp 455 xl classic(dot matrix)-6nos 4.epson lq1310 classic (dot matrix)-15nos 5. epson l405 inkjet 1no, scraped 12v 21p monolid battery (150ah), scraped 12v 25p monolid battery (180ah), scraped - frp cowl material(4.445mt), scraped all rubber bed oil seels, fan belts & rubber items, scraped tyre buffing dust at rc unit, scraped-10.00 x20 radial tyre at rc unit, scraped 295/80r/22.5 tube less radial tyres at rc unit, scaped-10.00x20 tube with mouth at rc unit, scaped-flaps ,flap cut pieces, scaped-10.00x20 tube cut pieces at rc unit, tn29/n2773 cond.scrap of bus body shell with damaged 1 pass seat frame assy.-7 nos, 2 pass seat frame assy. -5 nos, 3.hat track 2nos as it is condition, tn29/n2766 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -7 nos, 4.hat track 2no as it is condition, tn29/n2832 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2nos as it is condition, tn30/n1615 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2no as it is condition, tn29/n2757 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-7 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, tn29/n2750 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, scaped-new chassis cabin, scaped-ply wood(3.793mt), scaped-fly wheel with ring

corporations/Associations/Others

CTN :45275468

26 May, 2026 NA

Sankagiri - Tamil Nadu

Tender For disposal of scrap - scrap sales for salem region, scraped old broken spring cut leaves, scraped old cast iron cylider liners, scraped old cast iron fly wheel face plate & brake drum ex. mani fold items, scraped old m.s angle ,pipes &bumpers & other ms items, scraped old g.i sheet & cut pieces, scraped old tarmixing with g.i sheet, scraped old body sheet frames & pipe items, scraped old body aluminum sheet & glass frames other cut pieces, scraped old auto m.s steels spares, bolt nuts &other auto parts items, scrap old gear wheel & shaft items, scraped old clutch plate, scraped old brake lining & clutch facing, scraped old bearings & cone items, scraped old wood, mica sheet,plywood items (11.924 mt), scraped old frb cowl & bumpers & all type of frb items ( 1.239 mt), scraped old hanger & shackle items, scraped old aluminium radiator core, scraped old brass rivit, scraped old 4 lt empty paint tin, scraped old 20 lt empty paint tin, scraped all type of filters air & oil filters, scraped old all type of plastic items, scraped old empty 210 lt oil barrel (gi sheet), scraped old empty grease barrel (gi sheet), scraped old empty plastc barrel, scraped old empty milk plastic pocket cover, scraped old aluminum stuffed sheet, scraped 12v 21p monoled battery, scraped 12v 25p monoled battery, scraped 12v 27p monoled battery, scraped lmv 12v 11p monoled battery, scraped old used 210 lt waste engine oil with barrel, scraped old front & rear brake shoe, scraped old steering box reservoir tank, scraped old all computer item computer: hcl pentium - iv dul core = 08 hp pentium -iv mbz = 12 ccs pentium -iv core 2 quad = 28 printers :tvs hd 245 gold dmp printer = 25tvs hd 945 dmp printer = 2tvs msp 455 xlc dmp printer = 08tvs hd 245 gold dmp printer = 16wipro hq 070 dx dmp printer = 02epson m200 inkjet printer = 03scanner :hp4850 color scanner = 01ups :0.5 kva ups = 02, 2kva ups = 14, 3 kva ups = 01, 5 kva ups = 03

corporations/Associations/Others

CTN :45298456

30 May, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of new obsolete cool water line,new obsolete water pump purifier kit (major) tata,new obsolete flexible pipe for silencer all type (ms),new obsolete clutch facing (12 inch),new obsolete s/a hose bracket to slave cly. (all type),new obsolete trackrod lev. lh,new obsolete pre filter housing,new obsolete bearing 2505 2620 3103,new obsolete bearing 6403 2rs,new obsolete bearing nu-307,new obsolete bearing t-151,new obsolete cylinder liner all type,new obsolete c-type center bering bracket,new obsolete cam bush set,new obsolete rpm meter,new obsolete oil pressure gauge meter,new obsolete radiator cap,new obsolete oil seal (small),new obsolete oil seal all type (rubber),gear flywheel ring,new obsolete propeller shaft,new obsolete stiffner plate cyl.block,new obsolete withdrawal plate,new obsolete drop arm (bigg size),new obsolete drop arm (small size),new obsolete splined end all type (small),new obsolete clutch operating lever (small)

CTN :45281641

02 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of service kit , clutch facing kit , bonnet shocker , caliper pad , wheel brg , camplate , suspension bush kit , fuel filter , oil filter

CTN :45154796

25 May, 2026 NA

Bathinda - Punjab

Tender For corrigendum : supply of parking light bulb 5w , blade wind shield wiper , bag tools and spare parts , wiper blades , fan belt engine , rotary switch iec make rotary , clutch facing kit consisting of 2 items

corporations/Associations/Others

CTN :45168239

21 May, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of new obsolete cool water line,new obsolete water pump purifier kit (major) tata,new obsolete flexible pipe for silencer all type (ms),new obsolete clutch facing (12 inch),new obsolete s/a hose bracket to slave cly. (all type),new obsolete trackrod lev. lh,new obsolete pre filter housing,new obsolete bearing 2505 2620 3103,new obsolete bearing 6403 2rs,new obsolete bearing nu-307,new obsolete bearing t-151,new obsolete cylinder liner all type,new obsolete all type alternator stator,new obsolete c-type center bering bracket,new obsolete cam bush set,new obsolete silencer mufflers,new obsolete silencer all type exhaust manifold pipe (big),new obsolete silencer all type bend pipe (small),new obsolete silencer all type bend pipe (medium),new obsolete rpm meter,new obsolete oil pressure gauge meter,new obsolete radiator cap,new obsolete oil seal (small),new obsolete oil seal all type (rubber),gear flywheel ring,new obsolete propeller shaft,new obsolete cooler plate,new obsolete stiffner plate cyl.block,new obsolete withdrawal plate,new obsolete drop arm (bigg size),new obsolete drop arm (small size),new obsolete splined end all type (small),new obsolete clutch operating lever (small)

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45138732

18 May, 2026 NA

Calcutta - West Bengal

Tender For supply of lv7-stln vf 4320-004124 ram hydraulic ram assy , lv7- stln vf p-1606451 kit master cylinder major , lv7-stln f- 4735211 ring spanner 16 x 17 metric , lv7-stln vf x- 7472700 engine speed sensor dg 6 , lv7-stln 4720- 015665 x-1913850 rubber hose air intake , lv7-stln p- 360215 clutch facing kit consisting of 2 items , lv7-stln vf 2520-445791 tech seam water separator , lv7-stln vf x-2205700 fog lamp switch , lv7-stln vf 2520-72- 000522 master cyl power unit clutch master cyl , lv7-stln vf 6220-72-000178 head lamp , lv7-stln 6220-004483 light back up , lv7-stln 2920-2202 rotary switch 16a 24v rotary , lv7-stln 2590-5455 solenoid eng starter electricals , lv7-stln vf b-0102343 g90 ignition switch with common

CTN :45119039

19 May, 2026 NA

Samba - Jammu And Kashmir

Tender For supply of bush kit set com , spacer , high pressure hose , control valve r kit , secution hose complete , primary fuel filter assy , head light assy right , head light assy left , combination switch , break pad , water pump assy , clutch facing kit

CTN :45014094

12 May, 2026 17.50 Lacs

Gwalior - Madhya Pradesh

Tender For supply of 01 nos 70hp or above capacity tractor with dual clutch for tmr machine gaushala, nagar nigam, gwalior with rto registration and 01 year zero dep insurance and 01 year under warranty service of the vehicle at relevant service with.5th call.

Dual Clutch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Co-operative