Latest ductile iron Tenders | Government ductile iron Tenders

State Government

CTN :45732637

02 Jul, 2026 49.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.

Central Government/Public Sector

CTN :45492036

06 Jul, 2026 NA

Kota - Rajasthan

Tender For corrigendum : special repair for replacement of ci/ gi water pipe line into di (ductile iron) pipe line in gtc area at mil stn kota

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

CTN :45704752

06 Jul, 2026 NA

Delhi - Delhi

Tender For tender for supply of tape adhesive transparent waterproof , rope nylon climbing , awls blade harness 63 0 mm , rules flexible 2 m , wire steel mild annealed 5 00mm , seals metallic lead 10mm , nails steel wire round 50mmx 2 6mm , nails steel clout cut flat head fine 20m , rivets snap head steel 8mm x 35mm , rivets snap head steel 5mm x 10mm , rivets snap head steel 6mm x 12mm , rivets snap head steel 6mm x 45mm , adhesive padding glue mowicol l , glue ordinary , bleaching powder stablished , soda ashtechnical , oil linseed raw , web thick og 25mm , leather cloth black , twine jute , muslin white bleached , cloth dosootie cotton og scoured , plywood general purpose wwr ab ply 240 , polythene film 25mm thick x 1 m width , chloroxylenol solution , padlocks ig 4 levers 50mm , padlocks ig 4 levers 40mm , h&les hammer 305mm , pincers carpenter 200mm , cutters anvil flat 400mm , tools sets rivetting no 10 , knife hawkbill for leather work , punches spring complete 280mm , palm sail makers sewing , screwdrivers cabin et 150mm , screwdrivers new perfect 100mm , pliers sealing lead 150mm , anvils black smiths single beak 12kg w , pincers upholsters 200mm , handles awl 95mm , roll tool accessories saddlers , chest tool kit medium wooden 950mm x 35 , chest tool kit 42 x 22 x 18cm , awls garnishing , punches leather oval 3 x 2 mm , punches leather round 3 mm , punches leather round 7mm , punches leather round 10mm , punches leather round 12mm , punches leather round 16mm , punches wad 20mm , claws tack lifter , mallets tinman s , panniers tool saddlersm , cobl pump spring , cobl valve control mk3 , tub iron galvanised 85 ltrs , basin wash aluminium , opener can and bottle , scoop hand flour mk2 , sieves atta circular mk 2 610mm di , roller for stone curry , knife cook 230mm , cobl pump rod

CTN :45715508

10 Jul, 2026 NA

Patiala - Punjab

Tender For supply of lv7 stln b0n00670 front wind shield , lv7 mg 38340m82c00 blade assy wiper , ciaz 41069m60m01 front shock absorbar , ciaz 41068m53m01 rear shock abosorber , lv7 t-815 137-613-254-080 steering lock , lv7 stln 6130-72-0464271 rectifier metallic , lv7 t-815 443-613- 200-704 clutch booster , lv7 stln 2910-008254 fuel engine primer hand primer , ciaz 95200ke1 ac compressor assy , lv7 stln f-8043800 head lamp lh , safari g278918130104 assy oil filter , safari 044caa00850n air filter , lv7 mg 2530-011978 claiper assy disc brake , lv7 stln f-3921800 slave cyl clutch , lv7 stln p-1317539 feed pump

CTN :45697879

06 Jul, 2026 NA

Delhi - Delhi

Tender For supply of assy universal joint long fork , field coil assy , valve inlet , valve exhaust 4 valve mpfi , hose non metallic , sub assy door glass , rear bumper moulding lower , hose assy air filter outle , wiper blade

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.