Latest ductile pipe Tenders | Government ductile pipe Tenders

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

State Government

CTN :45305483

15 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

State Government

CTN :45304203

08 Jun, 2026 8.33 Lacs

Umaria - Madhya Pradesh

Tender For procurement of spares for dewatering pumps make-maxflow pumps type 50-smp1 installed at fuel oil unloading pump house at unit no. 1 and 2 sgtps mppgcl, birsinghpur - as per schedule, strainer, suction cover, pressure body, impeller (semi - open), impeller nut, impeller key, pump shaft, block, seal plate, oil seal, block bush, top spider, line spider, top spider bush, line spider bush, line shaft, top shaft, pump shaft coupling, bearing sleeve, ratchet plate, grease nipple, pump coupling, ratchet pin, top adjusting nut, coupling rubber, motor coupling, line shaft coupling, gasket, suspension pipe, delivery pipe, .

Co-operative

CTN :45305048

01 Jun, 2026 75.0 Thousand

Mehsana - Gujarat

Tender For job work jobwork with materials of 2.5"raw wtr 1 installation charges of pipe line - asbestors cement pressure pipes. , concrete pipes with and without reinforcement, , p.s.c pipes (including fittings), , method of tests for concrete pipes, , materials for m.s specials, , specifications for m.s specials for p.s.c pipes, , specifications for steel cylinders reinforced concrete pipes, , methods of tests of concrete pipes, , centrifugally cast (spun) iron pressure pipes for water gas and sewage including fittings, , specifications for centrifugally cast (spun) d.i pipes for water, gas and sewage, , d.i fittings for pipes for water, gas & sewage, , dimensional requirements of rubber gaskets for mechanical joints and push on joints for the use with c.i d.i pipes, , ci specials for mechanical and push on flexible joints for pressure pipe lines for water gas and sewage, , horizontally cast iron double flanged pipes for water, gas and sewage, , cast iron fittings for pressure pipes for water, gas and sewage, , a) rubber rings for jointing c.i pipes,, , rcc pipes & a.c pipes, , b) rubber rings for jointing psc pipes, , rubber rings for jointing ac pipes with ac couplings, , pig lead, , hemp yarn, , rubber insertion to be used in jointing c.i d.f pipes, , bolts & nuts to be used in jointing c.i d.f pipes

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

Central Government/Public Sector

CTN :45119514

01 Jun, 2026 NA

Raebareli - Uttar Pradesh

Tender For corrigendum : supply of hp hose , jop hose , high pressure hose , flexible pipe , hp hose bearing ,

corporations/Associations/Others

CTN :44907308

03 Jun, 2026 4.03 Crore

Bengaluru - Karnataka

Tender For corrigendum : procurement of spare parts required for maintenance of tata & leyland bsvi vehicles. - gasket,exhaust manifold - tt bsvi, gasket-exhaust manifold for h-series engines - ll bsvi, companion flange - ll bsvi, water pump assembly - tt bsvi, oil seal outer rear - ll bsvi, oil seal rear outer - ll bsvi, push rod repair kit - ll bsvi, drag link assy ashwamedha - ll bsvi, s/a for nox sensor - ll bsvi, engine speed sensor for crs engines - ll bsvi, temperature sensor - tt bsvi-a046p415, sensor,pressure - tt bsvi, sensor,position - tt bsvi, pressure/temperature sensor bs3/4 - tt bsvi, pressure sensor - ll bsvi, sensor-ambient temperature adblue tank -alb - ll bsvi, auto slack adjuster straight - tt bsvi, auto slack adjuster 160cd 16 offset rh - tt bsvi, auto slack adjuster 160cd 16 offset lh - tt bsvi, slack adjuster rear rh - ll bsvi, slack adjuster rear lh - ll bsvi, slack adjuster front rh/lh - ll bsvi, mc kit major - tt bsvi, m c kit minor - tt bsvi, air dryer -repair kit - tt bsvi, ac head - tt bsvi, ddu minor repair kit - tt bsvi, clutch master cylinder - tt bsvi, clutch booster assy - tt bsvi, cl m.c. assy w/ reservoir - tt bsvi, cl booster repair kit - tt bsvi, clutch master repair kit - ll bsvi, repair kit- ll bsvi, ac head - ll bsvi, clutch servo assy - ll bsvi, clutch master cylinder - ll bsvi-2705252239-4700530650, apda assy with parallel system protection valve - ll bsvi, air compressor assay cyl block kit - ll bsvi, m c assy - ll bsvi, m c kit - ll bsvi, hyd pressure relief valve - ll bsvi, clutch booster (tvs girling make) - ll bsvi, clutch servo repair kit - ll bsvi - ll bsvi, repair kit - hand brake valve (msp 3/93) - ll bsvi, repair kit dual brake valve (msp 6/51) - ll bsvi, repair kit of brake chambers (msp 25/84) - ll bsvi, hose assy - tt bsvi, bent hose pipe - tt bsvi, set 6ldat+reducer hose bs2/3/4 - tt bsvi, hose,flexible - tt bsvi, air brake hose with anti kink spring - tt bsvi, rear brake hose - ll bsvi, front brake hose - ll bsvi, hose-air brake front 600mm length with spring guard / straight and elbow end m18x1.5 - ll bsvi., hose-air brake front 600mm length with spring guard / straight and elbow end m18x1.5 - ll bsvi, pressure pipe assy at gearbox end - rane hfb 64 for mdv bs6 migration - ll bsvi, return hose assy at gear end for viking bs6 - ll bsvi, engine mounting front - ll bsvi, hose-straight hump cac outlet polybond - h6 - ll bsvi, hose-straight hump cac inlet polybond - h6 - ll bsvi, hose-single bend radiator outlet - ll bsvi, hose-multi bend radiator inlet- e+3 h6 - ll bsvi, hose-multi bend -viking h6 - ll bsvi, radiator assembly - tt bsvi, radiator -mdv e+3 viking h6 - ll bsvi, thermostat - ll bsvi, shift cable - tt bsvi, manifold, exhaust - tt bsvi, gear box cable select - ll bsvi, gear box cable shift - ll bsvi, fly wheel ring - tt bsvi, fly wheel - tt bsvi, gear flywheel ring - ll bsvi, hp pipe - rail to injector 2 - ll bsvi, hp pipe - rail to injector 3 - ll bsvi, hp pipe - rail to injector 1 - ll bsvi, hp pipe - rail to injector 6 - ll bsvi, hp pipe - rail to injector 4 - ll bsvi, hp pipe - rail to injector 5 - ll bsvi, metering valve - ll bsvi, gasket,exhaust manifold - tt bsvi, gasket-exhaust manifold for h-series engines - ll bsvi, companion flange - ll bsvi, water pump assembly - tt bsvi, oil seal outer rear - ll bsvi, oil seal rear outer - ll bsvi, push rod repair kit - ll bsvi, drag link assy ashwamedha - ll bsvi, s/a for nox sensor - ll bsvi, engine speed sensor for crs engines - ll bsvi, temperature sensor - tt bsvi-a046p415, sensor,pressure - tt bsvi, sensor,position - tt bsvi, pressure/temperature sensor bs3/4 - tt bsvi, pressure sensor - ll bsvi, sensor-ambient temperature adblue tank -alb - ll bsvi, auto slack adjuster straight - tt bsvi, auto slack adjuster 160cd 16 offset rh - tt bsvi, auto slack adjuster 160cd 16 offset lh - tt bsvi, slack adjuster rear rh - ll bsvi, slack adjuster rear lh - ll bsvi, slack adjuster front rh/lh - ll bsvi, mc kit major - tt bsvi, m

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

Ductile Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors