Latest ducting frame Tenders | Government ducting frame Tenders

CTN :45318399

04 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of bldc motor for 3.5 inch propeller , bty 650-850 mah 4s lipo , 3.5 inch propeller , collapsible cage , unibody frame

CTN :44330653

27 May, 2026 NA

Bhandara - Maharashtra

Tender For bid to ras supply of sq. cage induction motor, tefc type, 3ph, 415v, 50hz, 2. 2kw, 3000 rpm (sycn. ) , foot mounted, frame s

State Government

CTN :44927486

10 Jun, 2026 1.51 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of ring granulator of l and t make for chp-i, 2x600mw, sstpp, mppgcl, dongalia. - suspension bar, moc- astm-a322 grade aisi 4140 suspension arm (01 set. = 25 nos. for one no. rg), moc-astm-a108/aisi 1045 end disc drive side, moc- astm-a108/aisi 1045 end disc non side, moc- astm-a108/aisi 1045 cage frame (without screen plates & adjusting mechanism), moc-is:2062 breaker plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. upper screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. lower screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. kick off plate, 1set=2nos for no rg with fixing bolts, moc-mn steel is:276, gr.iii 40mm thk.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45077178

25 May, 2026 NA

Dankuni - West Bengal

Tender For tefs squirrel cage induction motor 3 phase 415 volt 50 hz ac supply 3hp/2.2kw frame size: ns 100l, 1500 rpm duty s1, ip-55 protection standard class "f" insulation with temperature rise limited to class "b" suitable for ambient 50 degree centigrade. make/brand- cg power & industrial solution ltd/kirlosker/havells/abb or similar. [ warranty period: 30 months after the date of delivery ]

CTN :45117885

28 May, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of squirrel cage induction motor,power rating: 30 hp (22 kw), poles: 4 pole, speed: -1440?1500 rpm at 50 hz, voltage: 415 v ?10%, frequency: 50 hz, phase: 3 phase, duty: continuous (s1 duty), efficiency class: minimum ie3 or above as per 60034-30-1:2014, & is-12615:2018, enclosure: tefc (totally enclosed fan cooled), mounting: foot mounted (b3) / as required, insulation class/thermal calss: f/b, protection: ip65 or better, frame: km180l, product code:km2.22t0.bmc.b03.tss with tyre coupling pulley set & base frame for pump horizontal split case bare pump model- 5wlr12a of capacity 60,000 gph (227,000 lph),delivery head: 22 mtr, suction size is 150mm i.e. 6 inch & delivery size is 125 mm i.e. 5 inch, eff-83%, bkw- 16.55 kw of make kirloskar or equivalent as per cege spec : cee/s/185/hscf pump/9/98/rev july 2022. [ warranty period: 30 months after the date of delivery ]

CTN :45292420

12 Jun, 2026 NA

Khammam-T - Telangana

Tender For supply of 2.2 kw, squirrel cage induction motor, 4 pole, frame size: 100l, horizontal foot mounted, s1 duty , 3.7 kw, squirrel cage induction motor, 4 pole, frame size: 112m, horizontal foot mounted, s1 duty

Central Government And Public Sector

CTN :45066999

03 Jun, 2026 NA

Bangalore - Karnataka

Tender For 15hp, 4p, 160 m, foot mounted sq cage induction motor to the following specification: 1.rated power: 15hp 2.rated voltage: 415+/-10%v 3.phase:3 4.frequency: 50+/-5hz ac 5.pole:4 6.frame size: 160m 7.mounting: foot mounted 8.insulation class: f 9.duty: s1 10.enclosure: totally enclosed fan cooled 11.body: cast iron 12.winding: copper 13.conforming: is12615:2018, is:325 latest 14.minimum efficiency class:ie3 15.protection class: minimum ip55 makes: siemens, bharath bijilee, cg, kirloskar, hindustan, ngef, abb, alstom, havells, crompton, crompton greaves, ge, marathon. note: only authorized dealers/ manufacturers to quote. warranty: 12 months from the date of commissioning or 18 months from the date of supply whichever is earlier [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :45297056

25 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of panel for shovan chair car coaches for bangladesh railways, as per drawing: edts-463, rev-nil, packing instruction: electrical panels to be protected with transparent biodegradable polythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by fork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 100mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, top bottom arrow mark etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number for bulk items) of the manufacturer or e)date of manufacture f)delivery challan no. g)delivery challan date 2. the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45275013

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - miscellaneous ferrous scrap consisting of ms pipe, ms platform gutter, gate lock, camera housing, tom cpu cage, gi clamp, nut & bolt, rack handle, earth switch handle, fencing, hydrant box, co2 fire extinguisher, cable tray, nrv, meter box, butter fly valve, pump handle, hand rail,i-clamp, c-levis end, board angle, exhaust bellow, brake shoe, locker, cross arms, super mast, bearing, hose drum, angle, false ceiling, almirah,pad lock, hacksaw frame, metal perforated chair,plu, ferrous parts of pids panel,smps parts, spare cells charger, ms drain cover,horn, isolator lever, opc suspension clamp, n/b of pg, driving screw assemble, rtu panel, fhc door, ball valve, coupling, nozzle, ups battery bank, table, wheel chair, bajaj hot case, autometic hand sanitiser dispenser, cable clamp, hnaging device, screw element, marker board, battery cabinet, osg rope, landing door header, brake unit, main rope 8mm, drawer, q manager, standee, hand & padel sanitiser dispenser, information board, rc, catenary & contact clamp, tirfof, n/b 76 pg, hose drum, 4 way valve,pressure switch, flexible gi condute, blade, anti roll bar, n2,o2, da & r-410 gas cylinder, tool box, angles etc. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 07"

Ducting Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government