Latest dump truck scrap Tenders | Government dump truck scrap Tenders

corporations/Associations/Others

CTN :45303962

28 May, 2026 NA

Dindigul - Tamil Nadu

Tender For disposal of condemned scrap materials - disposal oe condemned scrap materials may 2026, cond. old damaged rear brake chamber half., cond.front brake chamber ., cond.rear brake chamber ., cond.rear brake chamber half., cond. iron damaged front engine cross member, con.old aluminium radiator inter cooler small size, cond. old damaged broken g.i.sheets hat rock luggage carrier.(lot location at bbu, battalagundu. ), con.old aluminium radiator inter cooler small size, cond. iron damaged front engine crass member, cond. removed air filter, oil filter, fuel filter and broken brake linings, cond. 10x20.00 radial tyres, cond. 11x20.00 tube less radial tyres, cond. 10x20.00 tube with mouth, cond. 10x20.00 tube with out mouth, cond flaps only, cond. cutting flaps only, cond old & new rubber citting pieces, cond. buffing rubber dust, cond.bus body sheel removed from tn01 an 0910., cond.bus body sheel removed from tn01 an 0911., cond.bus body sheel removed from tn01 an 0913., cond.bus body sheel removed from tn01 an 0914., cond.bus body sheel removed from tn01 an 0915., cond.bus body sheel removed from tn01 an 0922., cond.bus body sheel removed from tn01 an 0931., cond.bus body sheel removed from tn01 an 0936., cond.bus body sheel removed from tn01 an 0937., cond.bus body sheel removed from tn01 an 0939., cond.bus body sheel removed from tn01 an 0968., cond.bus body sheel removed from tn01 an 1005., cond.bus body shell removed from tn57/n2270., cond.bus body shell removed from tn57/n2277., cond.bus body shell removed from tn57/n2264., cond.bus body shell removed from tn57/n2287., cond.bus body shell removed from tn57/n2266., cond.bus body shell removed from tn57/n2269., cond.bus body shell removed from tn57/n2263., cond.bus body shell removed from tn57/n2265., cond.bus body shell removed from tn57/n2347., cond.bus body shell removed from tn57/n1897., cond.bus body shell removed from tn57/n2316., cond.bus body shell removed from tn57/n2295., cond.bus body shell removed from tn57/n2124., cond.bus body shell removed from tn57/n2318., cond.bus body shell removed from tn57/n2342., cond.bus body shell removed from tn57/n2315., cond.bus body shell removed from tn57/n2286., con.old aluminium radiator inter cooler big size, con.old aluminium radiator inter cooler small size, cond. iron damaged diesel tank big size, cond. iron damaged front engine cross member, cond. iron damaged rear brake chamber half, cond. iron damaged rear brake chamber, cond. damaged copper radiator, cond. iron damaged fly wheel ring gear only, cond. iron damaged face plate only, cond. iron damaged pressure plate only, cond. iron damaged brake shoe only, cond. iron damaged slag adjuster only, cond. iron damaged d.d unit only, cond. ad blue empty plastic barrels., cond. empty plastic oil barrels., cond. empty iron oil barrels., cond. empty iron grease barrels with lid.., cond. iron broken cylinder linner, cond damaged glass rubber beeding & auto rubber items., cond. broken iron & aluminium auto parts as it is., cond. iron broken & damaged gear wheel & gear shaft items., cond. iron broken & damaged bearing,cone & sleeve items., cond. broken auto parts ,bolt nut ,spring push and other broken iron items as it is., cond. iron broken & damaged brake drum items as it is., cond.removed from new chassis battery box angle,driver cane seat assy. & other bracket items., cond. old damaged broken g.i.sheets & m s cuttings, cond. old iron rusted angles sheet, frame,radiator bracket and other iron items., cond. buffing rubber dust, cond. 10x20.00 tube with mouth, cond. 10x20.00 tube with out mouth, cond flaps only, cond. 10x20.00 radial tyres, cond. 11x20.00 tube less radial tyres, cond. 9.00 x20.00 nylon tyre -2 nos & cond. 10.00 x 20.00 nylon tyre -1 no

CTN :45309000

30 May, 2026 NA

Panipat - Haryana

Tender For shafts with sprocket for cane carrier, mrc, irc, be and mbc

CTN :45057581

27 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45258338

28 May, 2026 NA

Multi City - Gujarat

Tender For purchase of new cane carrier chain, block type inter rack carrier, feeder table chain and its spare (reinvite)

CTN :45002566

21 May, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras tender for supply of assy oil cane carrier frame , solenoid , ignition key , assy hose , chassis record beg , fly weight assy , gasket exhaust manifold , assy face side rh , speedometer

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

Co-operative

CTN :45145985

25 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For cane carrier chain cleaning work

CTN :45085917

15 May, 2026 41.0 Thousand

Gajraula - Uttar Pradesh

Tender For providing of facility management services - lumpsum based - mill house and cane carrier cleaning and cane carrier dismantling; cleaning and dismantling; consumables to be provided by service provider (inclusive in contract cost)

CTN :45085868

15 May, 2026 NA

Calcutta - West Bengal

Tender For supply of lv7-tata 250726700152 assy ball joint , lv7-tata 2510- 72-0000140 lever accelerator , lv7-tata 207609130181 assy air cleaner , lv7-tata 9999-000713 windshield assy flat , lv7-tata 2614-7061-102 assy water tank , lv7-tata 25733560311 bearing tapered roller outer , lv7-tata 274772502302 regulating glass rh , lv7-tata l0140200027 solenoid switch , lv7-tata v-350-2541-5005 assy oil cane carrier frame , lv7-tln vf 5640-72-0000508 weather strip , lv7-stln vf p-4303702 cup diff brg rh , lv7-stln vf p-4303502 cup diff brg lh , lv7-stln x- 3950600 universal joint , lv7-stln f3v03800 brake e2 valve , lv7-stln f0244610 front hub bearing

Dump Truck Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Co-operative

Co-operative